+/* Convert tree expression to rtl instructions, for GNU compiler.
+ Copyright (C) 1988 Free Software Foundation, Inc.
+
+This file is part of GNU CC.
+
+GNU CC is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 1, or (at your option)
+any later version.
+
+GNU CC is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU CC; see the file COPYING. If not, write to
+the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */
+
+
+#include "config.h"
+#include "rtl.h"
+#include "tree.h"
+#include "flags.h"
+#include "insn-flags.h"
+#include "insn-codes.h"
+#include "expr.h"
+#include "insn-config.h"
+#include "recog.h"
+#include "gvarargs.h"
+#include "typeclass.h"
+
+/* Decide whether a function's arguments should be processed
+ from first to last or from last to first. */
+
+#ifdef STACK_GROWS_DOWNWARD
+#ifdef PUSH_ROUNDING
+#define PUSH_ARGS_REVERSED /* If it's last to first */
+#endif
+#endif
+
+/* Like STACK_BOUNDARY but in units of bytes, not bits. */
+#define STACK_BYTES (STACK_BOUNDARY / BITS_PER_UNIT)
+
+/* If this is nonzero, we do not bother generating VOLATILE
+ around volatile memory references, and we are willing to
+ output indirect addresses. If cse is to follow, we reject
+ indirect addresses so a useful potential cse is generated;
+ if it is used only once, instruction combination will produce
+ the same indirect address eventually. */
+int cse_not_expected;
+
+/* Nonzero to generate code for all the subroutines within an
+ expression before generating the upper levels of the expression.
+ Nowadays this is never zero. */
+int do_preexpand_calls = 1;
+
+/* Number of units that we should eventually pop off the stack.
+ These are the arguments to function calls that have already returned. */
+int pending_stack_adjust;
+
+/* Nonzero means stack pops must not be deferred, and deferred stack
+ pops must not be output. It is nonzero inside a function call,
+ inside a conditional expression, inside a statement expression,
+ and in other cases as well. */
+int inhibit_defer_pop;
+
+/* A list of all cleanups which belong to the arguments of
+ function calls being expanded by expand_call. */
+static tree cleanups_this_call;
+
+/* Nonzero means current function may call alloca
+ as a subroutine. (__builtin_alloca does not count.) */
+int may_call_alloca;
+
+rtx store_expr ();
+static void store_constructor ();
+static rtx store_field ();
+static rtx expand_call ();
+static void emit_call_1 ();
+static rtx prepare_call_address ();
+static rtx expand_builtin ();
+static rtx compare ();
+static rtx compare_constants ();
+static rtx compare1 ();
+static rtx do_store_flag ();
+static void preexpand_calls ();
+static rtx expand_increment ();
+static void init_queue ();
+
+void do_pending_stack_adjust ();
+
+/* MOVE_RATIO is the number of move instructions that is better than
+ a block move. */
+
+#ifndef MOVE_RATIO
+#if defined (HAVE_movstrqi) || defined (HAVE_movstrhi) || defined (HAVE_movstrsi)
+#define MOVE_RATIO 2
+#else
+/* A value of around 6 would minimize code size; infinity would minimize
+ execution time. */
+#define MOVE_RATIO 15
+#endif
+#endif
+
+/* Table indexed by tree code giving 1 if the code is for a
+ comparison operation, or anything that is most easily
+ computed with a conditional branch.
+
+ We include tree.def to give it the proper length.
+ The contents thus created are irrelevant.
+ The real contents are initialized in init_comparisons. */
+
+#define DEFTREECODE(SYM, NAME, TYPE, LENGTH) 0,
+
+static char comparison_code[] = {
+#include "tree.def"
+};
+#undef DEFTREECODE
+
+/* This is run once per compilation. */
+
+void
+init_comparisons ()
+{
+ comparison_code[(int) EQ_EXPR] = 1;
+ comparison_code[(int) NE_EXPR] = 1;
+ comparison_code[(int) LT_EXPR] = 1;
+ comparison_code[(int) GT_EXPR] = 1;
+ comparison_code[(int) LE_EXPR] = 1;
+ comparison_code[(int) GE_EXPR] = 1;
+}
+
+/* This is run at the start of compiling a function. */
+
+void
+init_expr ()
+{
+ init_queue ();
+ may_call_alloca = 0;
+}
+\f
+/* Manage the queue of increment instructions to be output
+ for POSTINCREMENT_EXPR expressions, etc. */
+
+static rtx pending_chain;
+
+/* Queue up to increment (or change) VAR later. BODY says how:
+ BODY should be the same thing you would pass to emit_insn
+ to increment right away. It will go to emit_insn later on.
+
+ The value is a QUEUED expression to be used in place of VAR
+ where you want to guarantee the pre-incrementation value of VAR. */
+
+static rtx
+enqueue_insn (var, body)
+ rtx var, body;
+{
+ pending_chain = gen_rtx (QUEUED, GET_MODE (var),
+ var, 0, 0, body, pending_chain);
+ return pending_chain;
+}
+
+/* Use protect_from_queue to convert a QUEUED expression
+ into something that you can put immediately into an instruction.
+ If the queued incrementation has not happened yet,
+ protect_from_queue returns the variable itself.
+ If the incrementation has happened, protect_from_queue returns a temp
+ that contains a copy of the old value of the variable.
+
+ Any time an rtx which might possibly be a QUEUED is to be put
+ into an instruction, it must be passed through protect_from_queue first.
+ QUEUED expressions are not meaningful in instructions.
+
+ Do not pass a value through protect_from_queue and then hold
+ on to it for a while before putting it in an instruction!
+ If the queue is flushed in between, incorrect code will result. */
+
+rtx
+protect_from_queue (x, modify)
+ register rtx x;
+ int modify;
+{
+ register RTX_CODE code = GET_CODE (x);
+
+ if (code != QUEUED)
+ {
+ /* A special hack for read access to (MEM (QUEUED ...))
+ to facilitate use of autoincrement.
+ Make a copy of the contents of the memory location
+ rather than a copy of the address, but not
+ if the value is of mode BLKmode. */
+ if (code == MEM && GET_MODE (x) != BLKmode
+ && GET_CODE (XEXP (x, 0)) == QUEUED && !modify)
+ {
+ register rtx y = XEXP (x, 0);
+ XEXP (x, 0) = QUEUED_VAR (y);
+ if (QUEUED_INSN (y))
+ {
+ register rtx temp = gen_reg_rtx (GET_MODE (x));
+ emit_insn_before (gen_move_insn (temp, x),
+ QUEUED_INSN (y));
+ return temp;
+ }
+ return x;
+ }
+ /* Otherwise, recursively protect the subexpressions of all
+ the kinds of rtx's that can contain a QUEUED. */
+ if (code == MEM)
+ XEXP (x, 0) = protect_from_queue (XEXP (x, 0), 0);
+ else if (code == PLUS || code == MULT)
+ {
+ XEXP (x, 0) = protect_from_queue (XEXP (x, 0), 0);
+ XEXP (x, 1) = protect_from_queue (XEXP (x, 1), 0);
+ }
+ return x;
+ }
+ /* If the increment has not happened, use the variable itself. */
+ if (QUEUED_INSN (x) == 0)
+ return QUEUED_VAR (x);
+ /* If the increment has happened and a pre-increment copy exists,
+ use that copy. */
+ if (QUEUED_COPY (x) != 0)
+ return QUEUED_COPY (x);
+ /* The increment has happened but we haven't set up a pre-increment copy.
+ Set one up now, and use it. */
+ QUEUED_COPY (x) = gen_reg_rtx (GET_MODE (QUEUED_VAR (x)));
+ emit_insn_before (gen_move_insn (QUEUED_COPY (x), QUEUED_VAR (x)),
+ QUEUED_INSN (x));
+ return QUEUED_COPY (x);
+}
+
+/* Return nonzero if X contains a QUEUED expression:
+ if it contains anything that will be altered by a queued increment.
+ We handle only combinations of MEM, PLUS, MINUS and MULT operators
+ since memory addresses generally contain only those. */
+
+static int
+queued_subexp_p (x)
+ rtx x;
+{
+ register enum rtx_code code = GET_CODE (x);
+ switch (code)
+ {
+ case QUEUED:
+ return 1;
+ case MEM:
+ return queued_subexp_p (XEXP (x, 0));
+ case MULT:
+ case PLUS:
+ case MINUS:
+ return queued_subexp_p (XEXP (x, 0))
+ || queued_subexp_p (XEXP (x, 1));
+ }
+ return 0;
+}
+
+/* Perform all the pending incrementations. */
+
+void
+emit_queue ()
+{
+ register rtx p;
+ while (p = pending_chain)
+ {
+ QUEUED_INSN (p) = emit_insn (QUEUED_BODY (p));
+ pending_chain = QUEUED_NEXT (p);
+ }
+}
+
+static void
+init_queue ()
+{
+ if (pending_chain)
+ abort ();
+}
+\f
+/* Copy data from FROM to TO, where the machine modes are not the same.
+ Both modes may be integer, or both may be floating.
+ UNSIGNEDP should be nonzero if FROM is an unsigned type.
+ This causes zero-extension instead of sign-extension. */
+
+void
+convert_move (to, from, unsignedp)
+ register rtx to, from;
+ int unsignedp;
+{
+ enum machine_mode to_mode = GET_MODE (to);
+ enum machine_mode from_mode = GET_MODE (from);
+ int to_real = GET_MODE_CLASS (to_mode) == MODE_FLOAT;
+ int from_real = GET_MODE_CLASS (from_mode) == MODE_FLOAT;
+ int extending = (int) to_mode > (int) from_mode;
+
+ to = protect_from_queue (to, 1);
+ from = protect_from_queue (from, 0);
+
+ if (to_real != from_real)
+ abort ();
+
+ if (to_mode == from_mode
+ || (from_mode == VOIDmode && CONSTANT_P (from)))
+ {
+ emit_move_insn (to, from);
+ return;
+ }
+
+ if (to_real)
+ {
+#ifdef HAVE_extendsfdf2
+ if (HAVE_extendsfdf2 && extending)
+ {
+ emit_unop_insn (CODE_FOR_extendsfdf2, to, from, UNKNOWN);
+ return;
+ }
+#endif
+#ifdef HAVE_truncdfsf2
+ if (HAVE_truncdfsf2 && ! extending)
+ {
+ emit_unop_insn (CODE_FOR_truncdfsf2, to, from, UNKNOWN);
+ return;
+ }
+#endif
+ emit_library_call (gen_rtx (SYMBOL_REF, Pmode, (extending
+ ? "__extendsfdf2"
+ : "__truncdfsf2")), 0,
+ GET_MODE (to), 1,
+ from, (extending ? SFmode : DFmode));
+ emit_move_insn (to, hard_libcall_value (GET_MODE (to)));
+ return;
+ }
+
+ /* Now both modes are integers. */
+
+ if (to_mode == DImode)
+ {
+ if (unsignedp)
+ {
+#ifdef HAVE_zero_extendsidi2
+ if (HAVE_zero_extendsidi2 && from_mode == SImode)
+ emit_unop_insn (CODE_FOR_zero_extendsidi2, to, from, ZERO_EXTEND);
+ else
+#endif
+#ifdef HAVE_zero_extendhidi2
+ if (HAVE_zero_extendhidi2 && from_mode == HImode)
+ emit_unop_insn (CODE_FOR_zero_extendhidi2, to, from, ZERO_EXTEND);
+ else
+#endif
+#ifdef HAVE_zero_extendqidi2
+ if (HAVE_zero_extendqidi2 && from_mode == QImode)
+ emit_unop_insn (CODE_FOR_zero_extendqidi2, to, from, ZERO_EXTEND);
+ else
+#endif
+#ifdef HAVE_zero_extendsidi2
+ if (HAVE_zero_extendsidi2)
+ {
+ convert_move (gen_lowpart (SImode, to), from, unsignedp);
+ emit_unop_insn (CODE_FOR_zero_extendsidi2, to,
+ gen_lowpart (SImode, to), ZERO_EXTEND);
+ }
+ else
+#endif
+ {
+ emit_insn (gen_rtx (CLOBBER, VOIDmode, to));
+ convert_move (gen_lowpart (SImode, to), from, unsignedp);
+ emit_clr_insn (gen_highpart (SImode, to));
+ }
+ }
+#ifdef HAVE_extendsidi2
+ else if (HAVE_extendsidi2 && from_mode == SImode)
+ emit_unop_insn (CODE_FOR_extendsidi2, to, from, SIGN_EXTEND);
+#endif
+#ifdef HAVE_extendhidi2
+ else if (HAVE_extendhidi2 && from_mode == HImode)
+ emit_unop_insn (CODE_FOR_extendhidi2, to, from, SIGN_EXTEND);
+#endif
+#ifdef HAVE_extendqidi2
+ else if (HAVE_extendqidi2 && from_mode == QImode)
+ emit_unop_insn (CODE_FOR_extendqidi2, to, from, SIGN_EXTEND);
+#endif
+#ifdef HAVE_extendsidi2
+ else if (HAVE_extendsidi2)
+ {
+ convert_move (gen_lowpart (SImode, to), from, unsignedp);
+ emit_unop_insn (CODE_FOR_extendsidi2, to,
+ gen_lowpart (SImode, to), SIGN_EXTEND);
+ }
+#endif
+#ifdef HAVE_slt
+ else if (HAVE_slt && insn_operand_mode[(int) CODE_FOR_slt][0] == SImode)
+ {
+ emit_insn (gen_rtx (CLOBBER, VOIDmode, to));
+ convert_move (gen_lowpart (SImode, to), from, unsignedp);
+ emit_insn (gen_slt (gen_highpart (SImode, to)));
+ }
+#endif
+ else
+ {
+ register rtx label = gen_label_rtx ();
+
+ emit_insn (gen_rtx (CLOBBER, VOIDmode, to));
+ emit_clr_insn (gen_highpart (SImode, to));
+ convert_move (gen_lowpart (SImode, to), from, unsignedp);
+ emit_cmp_insn (gen_lowpart (SImode, to),
+ gen_rtx (CONST_INT, VOIDmode, 0),
+ 0, 0, 0);
+ NO_DEFER_POP;
+ emit_jump_insn (gen_bge (label));
+ expand_unop (SImode, one_cmpl_optab,
+ gen_highpart (SImode, to), gen_highpart (SImode, to),
+ 1);
+ emit_label (label);
+ OK_DEFER_POP;
+ }
+ return;
+ }
+
+ if (from_mode == DImode)
+ {
+ convert_move (to, gen_lowpart (SImode, from), 0);
+ return;
+ }
+
+ /* Now follow all the conversions between integers
+ no more than a word long. */
+
+ /* For truncation, usually we can just refer to FROM in a narrower mode. */
+ if (GET_MODE_BITSIZE (to_mode) < GET_MODE_BITSIZE (from_mode)
+ && TRULY_NOOP_TRUNCATION (GET_MODE_BITSIZE (to_mode),
+ GET_MODE_BITSIZE (from_mode))
+ && ((GET_CODE (from) == MEM
+ && ! MEM_VOLATILE_P (from)
+ && ! mode_dependent_address_p (XEXP (from, 0)))
+ || GET_CODE (from) == REG
+ || GET_CODE (from) == SUBREG))
+ {
+ emit_move_insn (to, gen_lowpart (to_mode, from));
+ return;
+ }
+
+ if (to_mode == SImode && from_mode == HImode)
+ {
+ if (unsignedp)
+ {
+#ifdef HAVE_zero_extendhisi2
+ if (HAVE_zero_extendhisi2)
+ emit_unop_insn (CODE_FOR_zero_extendhisi2, to, from, ZERO_EXTEND);
+ else
+#endif
+ abort ();
+ }
+ else
+ {
+#ifdef HAVE_extendhisi2
+ if (HAVE_extendhisi2)
+ emit_unop_insn (CODE_FOR_extendhisi2, to, from, SIGN_EXTEND);
+ else
+#endif
+ abort ();
+ }
+ return;
+ }
+
+ if (to_mode == SImode && from_mode == QImode)
+ {
+ if (unsignedp)
+ {
+#ifdef HAVE_zero_extendqisi2
+ if (HAVE_zero_extendqisi2)
+ {
+ emit_unop_insn (CODE_FOR_zero_extendqisi2, to, from, ZERO_EXTEND);
+ return;
+ }
+#endif
+#if defined (HAVE_zero_extendqihi2) && defined (HAVE_extendhisi2)
+ if (HAVE_zero_extendqihi2 && HAVE_extendhisi2)
+ {
+ register rtx temp = gen_reg_rtx (HImode);
+ emit_unop_insn (CODE_FOR_zero_extendqihi2, temp, from, ZERO_EXTEND);
+ emit_unop_insn (CODE_FOR_extendhisi2, to, temp, SIGN_EXTEND);
+ return;
+ }
+#endif
+ }
+ else
+ {
+#ifdef HAVE_extendqisi2
+ if (HAVE_extendqisi2)
+ {
+ emit_unop_insn (CODE_FOR_extendqisi2, to, from, SIGN_EXTEND);
+ return;
+ }
+#endif
+#if defined (HAVE_extendqihi2) && defined (HAVE_extendhisi2)
+ if (HAVE_extendqihi2 && HAVE_extendhisi2)
+ {
+ register rtx temp = gen_reg_rtx (HImode);
+ emit_unop_insn (CODE_FOR_extendqihi2, temp, from, SIGN_EXTEND);
+ emit_unop_insn (CODE_FOR_extendhisi2, to, temp, SIGN_EXTEND);
+ return;
+ }
+#endif
+ }
+ abort ();
+ }
+
+ if (to_mode == HImode && from_mode == QImode)
+ {
+ if (unsignedp)
+ {
+#ifdef HAVE_zero_extendqihi2
+ if (HAVE_zero_extendqihi2)
+ {
+ emit_unop_insn (CODE_FOR_zero_extendqihi2, to, from, ZERO_EXTEND);
+ return;
+ }
+#endif
+ }
+ else
+ {
+#ifdef HAVE_extendqihi2
+ if (HAVE_extendqihi2)
+ {
+ emit_unop_insn (CODE_FOR_extendqihi2, to, from, SIGN_EXTEND);
+ return;
+ }
+#endif
+ }
+ abort ();
+ }
+
+#if 0 /* This seems to be redundant with code 100 lines up. */
+
+ /* Now we are truncating an integer to a smaller one.
+ If the result is a temporary, we might as well just copy it,
+ since only the low-order part of the result needs to be valid
+ and it is valid with no change. */
+
+ if (GET_CODE (to) == REG)
+ {
+ if (GET_CODE (from) == REG)
+ {
+ emit_move_insn (to, gen_lowpart (GET_MODE (to), from));
+ return;
+ }
+ else if (GET_CODE (from) == SUBREG)
+ {
+ from = copy_rtx (from);
+ /* This is safe since FROM is not more than one word. */
+ PUT_MODE (from, GET_MODE (to));
+ emit_move_insn (to, from);
+ return;
+ }
+#ifndef BYTES_BIG_ENDIAN
+ else if (GET_CODE (from) == MEM)
+ {
+ register rtx addr = XEXP (from, 0);
+ if (memory_address_p (GET_MODE (to), addr))
+ {
+ emit_move_insn (to, gen_rtx (MEM, GET_MODE (to), addr));
+ return;
+ }
+ }
+#endif /* not BYTES_BIG_ENDIAN */
+ }
+#endif /* 0 */
+
+ if (from_mode == SImode && to_mode == HImode)
+ {
+#ifdef HAVE_truncsihi2
+ if (HAVE_truncsihi2)
+ {
+ emit_unop_insn (CODE_FOR_truncsihi2, to, from, UNKNOWN);
+ return;
+ }
+#endif
+ abort ();
+ }
+
+ if (from_mode == SImode && to_mode == QImode)
+ {
+#ifdef HAVE_truncsiqi2
+ if (HAVE_truncsiqi2)
+ {
+ emit_unop_insn (CODE_FOR_truncsiqi2, to, from, UNKNOWN);
+ return;
+ }
+#endif
+ abort ();
+ }
+
+ if (from_mode == HImode && to_mode == QImode)
+ {
+#ifdef HAVE_trunchiqi2
+ if (HAVE_trunchiqi2)
+ {
+ emit_unop_insn (CODE_FOR_trunchiqi2, to, from, UNKNOWN);
+ return;
+ }
+#endif
+ abort ();
+ }
+
+ /* Mode combination is not recognized. */
+ abort ();
+}
+
+/* Return an rtx for a value that would result
+ from converting X to mode MODE.
+ Both X and MODE may be floating, or both integer.
+ UNSIGNEDP is nonzero if X is an unsigned value.
+ This can be done by referring to a part of X in place
+ or by copying to a new temporary with conversion. */
+
+rtx
+convert_to_mode (mode, x, unsignedp)
+ enum machine_mode mode;
+ rtx x;
+ int unsignedp;
+{
+ register rtx temp;
+ if (mode == GET_MODE (x))
+ return x;
+ if (integer_mode_p (mode)
+ && GET_MODE_SIZE (mode) <= GET_MODE_SIZE (GET_MODE (x))
+ && ! (GET_CODE (x) == MEM && MEM_VOLATILE_P (x)))
+ return gen_lowpart (mode, x);
+ temp = gen_reg_rtx (mode);
+ convert_move (temp, x, unsignedp);
+ return temp;
+}
+
+int
+integer_mode_p (mode)
+ enum machine_mode mode;
+{
+ return (int) mode > (int) VOIDmode && (int) mode <= (int) TImode;
+}
+\f
+/* Generate several move instructions to copy LEN bytes
+ from block FROM to block TO. (These are MEM rtx's with BLKmode).
+ The caller must pass FROM and TO
+ through protect_from_queue before calling.
+ ALIGN (in bytes) is maximum alignment we can assume. */
+
+struct move_by_pieces
+{
+ rtx to;
+ rtx to_addr;
+ int autinc_to;
+ int explicit_inc_to;
+ rtx from;
+ rtx from_addr;
+ int autinc_from;
+ int explicit_inc_from;
+ int len;
+ int offset;
+ int reverse;
+};
+
+static void move_by_pieces_1 ();
+static int move_by_pieces_ninsns ();
+
+static void
+move_by_pieces (to, from, len, align)
+ rtx to, from;
+ int len, align;
+{
+ struct move_by_pieces data;
+ rtx to_addr = XEXP (to, 0), from_addr = XEXP (from, 0);
+
+ data.offset = 0;
+ data.to_addr = to_addr;
+ data.from_addr = from_addr;
+ data.to = to;
+ data.from = from;
+ data.autinc_to
+ = (GET_CODE (to_addr) == PRE_INC || GET_CODE (to_addr) == PRE_DEC
+ || GET_CODE (to_addr) == POST_INC || GET_CODE (to_addr) == POST_DEC);
+ data.autinc_from
+ = (GET_CODE (from_addr) == PRE_INC || GET_CODE (from_addr) == PRE_DEC
+ || GET_CODE (from_addr) == POST_INC
+ || GET_CODE (from_addr) == POST_DEC);
+
+ data.explicit_inc_from = 0;
+ data.explicit_inc_to = 0;
+ data.reverse
+ = (GET_CODE (to_addr) == PRE_DEC || GET_CODE (to_addr) == POST_DEC);
+ if (data.reverse) data.offset = len;
+ data.len = len;
+
+ /* If copying requires more than two move insns,
+ copy addresses to registers (to make displacements shorter)
+ and use post-increment if available. */
+ if (!(data.autinc_from && data.autinc_to)
+ && move_by_pieces_ninsns (len, align) > 2)
+ {
+#ifdef HAVE_PRE_DECREMENT
+ if (data.reverse && ! data.autinc_from)
+ {
+ data.from_addr = copy_addr_to_reg (plus_constant (from_addr, len));
+ data.autinc_from = 1;
+ data.explicit_inc_from = -1;
+ }
+#endif
+#ifdef HAVE_POST_INCREMENT
+ if (! data.autinc_from)
+ {
+ data.from_addr = copy_addr_to_reg (from_addr);
+ data.autinc_from = 1;
+ data.explicit_inc_from = 1;
+ }
+#endif
+ if (!data.autinc_from && CONSTANT_P (from_addr))
+ data.from_addr = copy_addr_to_reg (from_addr);
+#ifdef HAVE_PRE_DECREMENT
+ if (data.reverse && ! data.autinc_to)
+ {
+ data.to_addr = copy_addr_to_reg (plus_constant (to_addr, len));
+ data.autinc_to = 1;
+ data.explicit_inc_to = -1;
+ }
+#endif
+#ifdef HAVE_POST_INCREMENT
+ if (! data.reverse && ! data.autinc_to)
+ {
+ data.to_addr = copy_addr_to_reg (to_addr);
+ data.autinc_to = 1;
+ data.explicit_inc_to = 1;
+ }
+#endif
+ if (!data.autinc_to && CONSTANT_P (to_addr))
+ data.to_addr = copy_addr_to_reg (to_addr);
+ }
+
+#ifdef STRICT_ALIGNMENT
+ if (align > MOVE_MAX || align >= BIGGEST_ALIGNMENT / BITS_PER_UNIT)
+ align = MOVE_MAX;
+#else
+ align = MOVE_MAX;
+#endif
+
+#ifdef HAVE_movti
+ if (HAVE_movti && align >= GET_MODE_SIZE (TImode))
+ move_by_pieces_1 (gen_movti, TImode, &data);
+#endif
+#ifdef HAVE_movdi
+ if (HAVE_movdi && align >= GET_MODE_SIZE (DImode))
+ move_by_pieces_1 (gen_movdi, DImode, &data);
+#endif
+#ifdef HAVE_movsi
+ if (align >= GET_MODE_SIZE (SImode))
+ move_by_pieces_1 (gen_movsi, SImode, &data);
+#endif
+#ifdef HAVE_movhi
+ if (HAVE_movhi && align >= GET_MODE_SIZE (HImode))
+ move_by_pieces_1 (gen_movhi, HImode, &data);
+#endif
+#ifdef HAVE_movqi
+ move_by_pieces_1 (gen_movqi, QImode, &data);
+#else
+ movqi instruction required in machine description
+#endif
+}
+
+/* Return number of insns required to move L bytes by pieces.
+ ALIGN (in bytes) is maximum alignment we can assume. */
+
+static int
+move_by_pieces_ninsns (l, align)
+ unsigned int l;
+ int align;
+{
+ register int n_insns = 0;
+
+#ifdef STRICT_ALIGNMENT
+ if (align > MOVE_MAX || align >= BIGGEST_ALIGNMENT / BITS_PER_UNIT)
+ align = MOVE_MAX;
+#else
+ align = MOVE_MAX;
+#endif
+
+#ifdef HAVE_movti
+ if (HAVE_movti && align >= GET_MODE_SIZE (TImode))
+ n_insns += l / GET_MODE_SIZE (TImode), l %= GET_MODE_SIZE (TImode);
+#endif
+#ifdef HAVE_movdi
+ if (HAVE_movdi && align >= GET_MODE_SIZE (DImode))
+ n_insns += l / GET_MODE_SIZE (DImode), l %= GET_MODE_SIZE (DImode);
+#endif
+#ifdef HAVE_movsi
+ if (HAVE_movsi && align >= GET_MODE_SIZE (SImode))
+ n_insns += l / GET_MODE_SIZE (SImode), l %= GET_MODE_SIZE (SImode);
+#endif
+#ifdef HAVE_movhi
+ if (HAVE_movhi && align >= GET_MODE_SIZE (HImode))
+ n_insns += l / GET_MODE_SIZE (HImode), l %= GET_MODE_SIZE (HImode);
+#endif
+ n_insns += l;
+
+ return n_insns;
+}
+
+/* Subroutine of move_by_pieces. Move as many bytes as appropriate
+ with move instructions for mode MODE. GENFUN is the gen_... function
+ to make a move insn for that mode. DATA has all the other info. */
+
+static void
+move_by_pieces_1 (genfun, mode, data)
+ rtx (*genfun) ();
+ enum machine_mode mode;
+ struct move_by_pieces *data;
+{
+ register int size = GET_MODE_SIZE (mode);
+ register rtx to1, from1;
+
+ while (data->len >= size)
+ {
+ if (data->reverse) data->offset -= size;
+
+ to1 = (data->autinc_to
+ ? gen_rtx (MEM, mode, data->to_addr)
+ : change_address (data->to, mode,
+ plus_constant (data->to_addr, data->offset)));
+ from1 =
+ (data->autinc_from
+ ? gen_rtx (MEM, mode, data->from_addr)
+ : change_address (data->from, mode,
+ plus_constant (data->from_addr, data->offset)));
+
+#ifdef HAVE_PRE_DECREMENT
+ if (data->explicit_inc_to < 0)
+ emit_insn (gen_sub2_insn (data->to_addr,
+ gen_rtx (CONST_INT, VOIDmode, size)));
+ if (data->explicit_inc_from < 0)
+ emit_insn (gen_sub2_insn (data->from_addr,
+ gen_rtx (CONST_INT, VOIDmode, size)));
+#endif
+
+ emit_insn ((*genfun) (to1, from1));
+#ifdef HAVE_POST_INCREMENT
+ if (data->explicit_inc_to > 0)
+ emit_insn (gen_add2_insn (data->to_addr,
+ gen_rtx (CONST_INT, VOIDmode, size)));
+ if (data->explicit_inc_from > 0)
+ emit_insn (gen_add2_insn (data->from_addr,
+ gen_rtx (CONST_INT, VOIDmode, size)));
+#endif
+
+ if (! data->reverse) data->offset += size;
+
+ data->len -= size;
+ }
+}
+\f
+/* Emit code to move a block Y to a block X.
+ This may be done with string-move instructions,
+ with multiple scalar move instructions, or with a library call.
+
+ Both X and Y must be MEM rtx's (perhaps inside VOLATILE)
+ with mode BLKmode.
+ SIZE is an rtx that says how long they are.
+ ALIGN is the maximum alignment we can assume they have,
+ measured in bytes. */
+
+static void
+emit_block_move (x, y, size, align)
+ rtx x, y;
+ rtx size;
+ int align;
+{
+ if (GET_MODE (x) != BLKmode)
+ abort ();
+
+ if (GET_MODE (y) != BLKmode)
+ abort ();
+
+ x = protect_from_queue (x, 1);
+ y = protect_from_queue (y, 0);
+
+ if (GET_CODE (x) != MEM)
+ abort ();
+ if (GET_CODE (y) != MEM)
+ abort ();
+ if (size == 0)
+ abort ();
+
+ if (GET_CODE (size) == CONST_INT
+ && (move_by_pieces_ninsns ((unsigned) INTVAL (size), align)
+ < MOVE_RATIO))
+ move_by_pieces (x, y, INTVAL (size), align);
+ else
+ {
+ /* Try the most limited insn first, because there's no point
+ including more than one in the machine description unless
+ the more limited one has some advantage. */
+#ifdef HAVE_movstrqi
+ if (HAVE_movstrqi
+ && GET_CODE (size) == CONST_INT
+ && ((unsigned) INTVAL (size)
+ < (1 << (GET_MODE_BITSIZE (QImode) - 1))))
+ {
+ emit_insn (gen_movstrqi (x, y, size,
+ gen_rtx (CONST_INT, VOIDmode, align)));
+ return;
+ }
+#endif
+#ifdef HAVE_movstrhi
+ if (HAVE_movstrhi
+ && GET_CODE (size) == CONST_INT
+ && ((unsigned) INTVAL (size)
+ < (1 << (GET_MODE_BITSIZE (HImode) - 1))))
+ {
+ emit_insn (gen_movstrhi (x, y, size,
+ gen_rtx (CONST_INT, VOIDmode, align)));
+ return;
+ }
+#endif
+#ifdef HAVE_movstrsi
+ if (HAVE_movstrsi)
+ {
+ emit_insn (gen_movstrsi (x, y, size,
+ gen_rtx (CONST_INT, VOIDmode, align)));
+ return;
+ }
+#endif
+
+#ifdef TARGET_MEM_FUNCTIONS
+ emit_library_call (gen_rtx (SYMBOL_REF, Pmode, "memcpy"), 0,
+ VOIDmode, 3, XEXP (x, 0), Pmode,
+ XEXP (y, 0), Pmode,
+ size, Pmode);
+#else
+ emit_library_call (gen_rtx (SYMBOL_REF, Pmode, "bcopy"), 0,
+ VOIDmode, 3, XEXP (y, 0), Pmode,
+ XEXP (x, 0), Pmode,
+ size, Pmode);
+#endif
+ }
+}
+\f
+/* Copy all or part of a BLKmode value X into registers starting at REGNO.
+ The number of registers to be filled is NREGS. */
+
+void
+move_block_to_reg (regno, x, nregs)
+ int regno;
+ rtx x;
+ int nregs;
+{
+ int i;
+ if (GET_CODE (x) == CONST_DOUBLE && x != dconst0_rtx)
+ x = force_const_double_mem (x);
+ for (i = 0; i < nregs; i++)
+ {
+ if (GET_CODE (x) == REG)
+ emit_move_insn (gen_rtx (REG, SImode, regno + i),
+ gen_rtx (SUBREG, SImode, x, i));
+ else if (x == dconst0_rtx)
+ emit_move_insn (gen_rtx (REG, SImode, regno + i),
+ const0_rtx);
+ else
+ emit_move_insn (gen_rtx (REG, SImode, regno + i),
+ gen_rtx (MEM, SImode,
+ memory_address (SImode,
+ plus_constant (XEXP (x, 0),
+ i * GET_MODE_SIZE (SImode)))));
+ }
+}
+
+/* Copy all or part of a BLKmode value X out of registers starting at REGNO.
+ The number of registers to be filled is NREGS. */
+
+void
+move_block_from_reg (regno, x, nregs)
+ int regno;
+ rtx x;
+ int nregs;
+{
+ int i;
+ for (i = 0; i < nregs; i++)
+ {
+ if (GET_CODE (x) == REG)
+ emit_move_insn (gen_rtx (SUBREG, SImode, x, i),
+ gen_rtx (REG, SImode, regno + i));
+ else
+ emit_move_insn (gen_rtx (MEM, SImode,
+ memory_address (SImode,
+ plus_constant (XEXP (x, 0),
+ i * GET_MODE_SIZE (SImode)))),
+ gen_rtx (REG, SImode, regno + i));
+ }
+}
+
+/* Mark NREGS consecutive regs, starting at REGNO, as being live now. */
+
+static void
+use_regs (regno, nregs)
+ int regno;
+ int nregs;
+{
+ int i;
+ for (i = 0; i < nregs; i++)
+ emit_insn (gen_rtx (USE, VOIDmode, gen_rtx (REG, SImode, regno + i)));
+}
+\f
+/* Write zeros through the storage of OBJECT.
+ If OBJECT has BLKmode, SIZE is its length in bytes. */
+
+void
+clear_storage (object, size)
+ rtx object;
+ int size;
+{
+ if (GET_MODE (object) == BLKmode)
+ {
+#ifdef TARGET_MEM_FUNCTIONS
+ emit_library_call (gen_rtx (SYMBOL_REF, Pmode, "memset"), 0,
+ VOIDmode, 3,
+ XEXP (object, 0), Pmode, const0_rtx, Pmode,
+ gen_rtx (CONST_INT, VOIDmode, size), Pmode);
+#else
+ emit_library_call (gen_rtx (SYMBOL_REF, Pmode, "bzero"), 0,
+ VOIDmode, 2,
+ XEXP (object, 0), Pmode,
+ gen_rtx (CONST_INT, VOIDmode, size), Pmode);
+#endif
+ }
+ else
+ emit_move_insn (object, const0_rtx);
+}
+
+/* Generate code to copy Y into X.
+ Both Y and X must have the same mode, except that
+ Y can be a constant with VOIDmode.
+ This mode cannot be BLKmode; use emit_block_move for that.
+
+ Return the last instruction emitted. */
+
+rtx
+emit_move_insn (x, y)
+ rtx x, y;
+{
+ enum machine_mode mode = GET_MODE (x);
+ x = protect_from_queue (x, 1);
+ y = protect_from_queue (y, 0);
+
+ if ((CONSTANT_P (y) || GET_CODE (y) == CONST_DOUBLE)
+ && ! LEGITIMATE_CONSTANT_P (y))
+ {
+ y = force_const_mem (mode, y);
+ if (! memory_address_p (mode, XEXP (y, 0)))
+ y = gen_rtx (MEM, mode, memory_address (mode, XEXP (y, 0)));
+ }
+
+ if (mode == BLKmode)
+ abort ();
+ if (mov_optab->handlers[(int) mode].insn_code != CODE_FOR_nothing)
+ return
+ emit_insn (GEN_FCN (mov_optab->handlers[(int) mode].insn_code) (x, y));
+#if 0
+ /* It turns out you get much better optimization (in cse and flow)
+ if you define movdi and movdf instruction patterns
+ even if they must turn into multiple assembler instructions. */
+ else if (GET_MODE_SIZE (mode) >= GET_MODE_SIZE (SImode))
+ {
+ register int count = GET_MODE_SIZE (mode) / GET_MODE_SIZE (SImode);
+ register int i;
+ if (GET_CODE (y) == CONST_DOUBLE && y != dconst0_rtx)
+ y = force_const_double_mem (y);
+ for (i = 0; i < count; i++)
+ {
+ rtx x1, y1;
+ if (GET_CODE (x) == REG)
+ x1 = gen_rtx (SUBREG, SImode, x, i);
+ else
+ x1 = gen_rtx (MEM, SImode,
+ memory_address (SImode,
+ plus_constant (XEXP (x, 0),
+ i * GET_MODE_SIZE (SImode))));
+ if (GET_CODE (y) == REG)
+ y1 = gen_rtx (SUBREG, SImode, y, i);
+ else if (y == dconst0_rtx)
+ y1 = const0_rtx;
+ else
+ y1 = gen_rtx (MEM, SImode,
+ memory_address (SImode,
+ plus_constant (XEXP (y, 0),
+ i * GET_MODE_SIZE (SImode))));
+ emit_insn (gen_movsi (protect_from_queue (x1, 1), protect_from_queue (y1, 0)));
+ }
+ }
+#endif
+ else
+ abort ();
+}
+\f
+/* Pushing data onto the stack. */
+
+/* Push a block of length SIZE (perhaps variable)
+ and return an rtx to address the beginning of the block.
+ Note that it is not possible for the value returned to be a QUEUED.
+ The value may be stack_pointer_rtx.
+
+ The value we return does take account of STACK_POINTER_OFFSET. */
+
+rtx
+push_block (size)
+ rtx size;
+{
+ register rtx temp;
+ if (CONSTANT_P (size) || GET_CODE (size) == REG)
+ anti_adjust_stack (size);
+ else
+ anti_adjust_stack (copy_to_mode_reg (Pmode, size));
+
+#ifdef STACK_GROWS_DOWNWARD
+ temp = stack_pointer_rtx;
+#else
+ temp = gen_rtx (PLUS, Pmode,
+ stack_pointer_rtx,
+ negate_rtx (Pmode, size));
+ if (GET_CODE (size) != CONST_INT)
+ temp = force_operand (temp, 0);
+#endif
+
+#ifdef STACK_POINTER_OFFSET
+ temp = plus_constant (temp, STACK_POINTER_OFFSET);
+#endif /* STACK_POINTER_OFFSET */
+
+ return memory_address (QImode, temp);
+}
+
+static rtx
+gen_push_operand ()
+{
+ return gen_rtx (
+#ifdef STACK_GROWS_DOWNWARD
+ PRE_DEC,
+#else
+ PRE_INC,
+#endif
+ Pmode,
+ stack_pointer_rtx);
+}
+
+/* Generate code to push X onto the stack, assuming it has mode MODE.
+ MODE is redundant except when X is a CONST_INT (since they don't
+ carry mode info).
+ SIZE is an rtx for the size of data to be copied (in bytes),
+ needed only if X is BLKmode.
+
+ ALIGN (in bytes) is maximum alignment we can assume.
+
+ If PARTIAL is nonzero, then copy that many of the first words
+ of X into registers starting with REG, and push the rest of X.
+ The amount of space pushed is decreased by PARTIAL words,
+ rounded *down* to a multiple of PARM_BOUNDARY.
+ REG must be a hard register in this case.
+
+ EXTRA is the amount in bytes of extra space to leave next to this arg.
+
+ On a machine that lacks real push insns, ARGS_ADDR is the address of
+ the bottom of the argument block for this call. We use indexing off there
+ to store the arg. On machines with push insns, ARGS_ADDR is 0.
+
+ ARGS_SO_FAR is the size of args previously pushed for this call. */
+
+static void
+emit_push_insn (x, mode, size, align, partial, reg, extra, args_addr, args_so_far)
+ register rtx x;
+ enum machine_mode mode;
+ rtx size;
+ int align;
+ int partial;
+ rtx reg;
+ int extra;
+ rtx args_addr;
+ rtx args_so_far;
+{
+ rtx xinner;
+ enum direction stack_direction
+#ifdef STACK_GROWS_DOWNWARD
+ = downward;
+#else
+ = upward;
+#endif
+
+ /* Decide where to pad the argument: `downward' for below,
+ `upward' for above, or `none' for don't pad it.
+ Default is below for small data on big-endian machines; else above. */
+ enum direction where_pad = FUNCTION_ARG_PADDING (mode, size);
+
+ xinner = x = protect_from_queue (x, 0);
+
+ if (extra)
+ {
+ if (args_addr == 0)
+ {
+ /* Push padding now if padding above and stack grows down,
+ or if padding below and stack grows up. */
+ if (where_pad != none && where_pad != stack_direction)
+ anti_adjust_stack (gen_rtx (CONST_INT, VOIDmode, extra));
+ }
+ else
+ {
+ /* If space already allocated, just adjust the address we use. */
+ if (where_pad == downward)
+ args_so_far = plus_constant (args_so_far, extra);
+ }
+ }
+
+ if (mode == BLKmode)
+ {
+ /* Copy a block into the stack, entirely or partially. */
+
+ register rtx temp;
+ int used = partial * UNITS_PER_WORD;
+ int offset = used % (PARM_BOUNDARY / BITS_PER_UNIT);
+ int skip;
+
+ if (size == 0)
+ abort ();
+
+ used -= offset;
+
+ /* USED is now the # of bytes we need not copy to the stack
+ because registers will take care of them. */
+
+ if (partial != 0)
+ xinner = change_address (xinner, BLKmode,
+ plus_constant (XEXP (xinner, 0), used));
+
+/* If the partial register-part of the arg counts in its stack size,
+ skip the part of stack space corresponding to the registers.
+ Otherwise, start copying to the beginning of the stack space,
+ by setting SKIP to 0. */
+#ifndef FIRST_PARM_CALLER_OFFSET
+ skip = 0;
+#else
+ skip = used;
+#endif
+
+#ifdef PUSH_ROUNDING
+ /* Do it with several push insns if that doesn't take lots of insns
+ and if there is no difficulty with push insns that skip bytes
+ on the stack for alignment purposes. */
+ if (args_addr == 0
+ && GET_CODE (size) == CONST_INT
+ && args_addr == 0
+ && skip == 0
+ && (move_by_pieces_ninsns ((unsigned) INTVAL (size) - used, align)
+ < MOVE_RATIO)
+ && PUSH_ROUNDING (INTVAL (size)) == INTVAL (size))
+ move_by_pieces (gen_rtx (MEM, BLKmode, gen_push_operand ()), xinner,
+ INTVAL (size) - used, align);
+ else
+#endif /* PUSH_ROUNDING */
+ {
+ /* Otherwise make space on the stack and copy the data
+ to the address of that space. */
+
+ /* Deduct words put into registers from the size we must copy. */
+ if (partial != 0)
+ {
+ if (GET_CODE (size) == CONST_INT)
+ size = gen_rtx (CONST_INT, VOIDmode, INTVAL (size) - used);
+ else
+ size = expand_binop (GET_MODE (size), sub_optab, size,
+ gen_rtx (CONST_INT, VOIDmode, used),
+ 0, 0, OPTAB_LIB_WIDEN);
+ }
+
+ /* Get the address of the stack space. */
+ if (! args_addr)
+ temp = push_block (size);
+ else if (GET_CODE (args_so_far) == CONST_INT)
+ temp = memory_address (BLKmode,
+ plus_constant (args_addr,
+ skip + INTVAL (args_so_far)));
+ else
+ temp = memory_address (BLKmode,
+ plus_constant (gen_rtx (PLUS, Pmode,
+ args_addr, args_so_far),
+ skip));
+
+ /* TEMP is the address of the block. Copy the data there. */
+ if (GET_CODE (size) == CONST_INT
+ && (move_by_pieces_ninsns ((unsigned) INTVAL (size), align)
+ < MOVE_RATIO))
+ {
+ move_by_pieces (gen_rtx (MEM, BLKmode, temp), xinner,
+ INTVAL (size), align);
+ goto ret;
+ }
+ /* Try the most limited insn first, because there's no point
+ including more than one in the machine description unless
+ the more limited one has some advantage. */
+#ifdef HAVE_movstrqi
+ if (HAVE_movstrqi
+ && GET_CODE (size) == CONST_INT
+ && ((unsigned) INTVAL (size)
+ < (1 << (GET_MODE_BITSIZE (QImode) - 1))))
+ {
+ emit_insn (gen_movstrqi (gen_rtx (MEM, BLKmode, temp),
+ xinner, size,
+ gen_rtx (CONST_INT, VOIDmode, align)));
+ goto ret;
+ }
+#endif
+#ifdef HAVE_movstrhi
+ if (HAVE_movstrhi
+ && GET_CODE (size) == CONST_INT
+ && ((unsigned) INTVAL (size)
+ < (1 << (GET_MODE_BITSIZE (HImode) - 1))))
+ {
+ emit_insn (gen_movstrhi (gen_rtx (MEM, BLKmode, temp),
+ xinner, size,
+ gen_rtx (CONST_INT, VOIDmode, align)));
+ goto ret;
+ }
+#endif
+#ifdef HAVE_movstrsi
+ if (HAVE_movstrsi)
+ {
+ emit_insn (gen_movstrsi (gen_rtx (MEM, BLKmode, temp),
+ xinner, size,
+ gen_rtx (CONST_INT, VOIDmode, align)));
+ goto ret;
+ }
+#endif
+
+ if (reg_mentioned_p (stack_pointer_rtx, temp))
+ {
+ /* Now that emit_library_call does force_operand
+ before pushing anything, preadjustment does not work. */
+ temp = copy_to_reg (temp);
+#if 0
+ /* Correct TEMP so it holds what will be a description of
+ the address to copy to, valid after one arg is pushed. */
+ int xsize = GET_MODE_SIZE (Pmode);
+#ifdef PUSH_ROUNDING
+ xsize = PUSH_ROUNDING (xsize);
+#endif
+ xsize = ((xsize + PARM_BOUNDARY / BITS_PER_UNIT - 1)
+ / (PARM_BOUNDARY / BITS_PER_UNIT)
+ * (PARM_BOUNDARY / BITS_PER_UNIT));
+#ifdef TARGET_MEM_FUNCTIONS
+ /* If we are calling bcopy, we push one arg before TEMP.
+ If calling memcpy, we push two. */
+ xsize *= 2;
+#endif
+#ifdef STACK_GROWS_DOWNWARD
+ temp = plus_constant (temp, xsize);
+#else
+ temp = plus_constant (temp, -xsize);
+#endif /* not STACK_GROWS_DOWNWARD */
+#endif /* 0 */
+ }
+
+ /* Make inhibit_defer_pop nonzero around the library call
+ to force it to pop the bcopy-arguments right away. */
+ NO_DEFER_POP;
+#ifdef TARGET_MEM_FUNCTIONS
+ emit_library_call (gen_rtx (SYMBOL_REF, Pmode, "memcpy"), 0,
+ VOIDmode, 3, temp, Pmode, XEXP (xinner, 0), Pmode,
+ size, Pmode);
+#else
+ emit_library_call (gen_rtx (SYMBOL_REF, Pmode, "bcopy"), 0,
+ VOIDmode, 3, XEXP (xinner, 0), Pmode, temp, Pmode,
+ size, Pmode);
+#endif
+ OK_DEFER_POP;
+ }
+ }
+ else if (partial > 0)
+ {
+ /* Scalar partly in registers. */
+
+ int size = GET_MODE_SIZE (mode) / UNITS_PER_WORD;
+ int i;
+ int not_stack;
+ /* # words of start of argument
+ that we must make space for but need not store. */
+ int offset = partial % (PARM_BOUNDARY / BITS_PER_WORD);
+ int args_offset = INTVAL (args_so_far);
+ int skip;
+
+ /* If we make space by pushing it, we might as well push
+ the real data. Otherwise, we can leave OFFSET nonzero
+ and leave the space uninitialized. */
+ if (args_addr == 0)
+ offset = 0;
+
+ /* Now NOT_STACK gets the number of words that we don't need to
+ allocate on the stack. */
+ not_stack = partial - offset;
+
+/* If the partial register-part of the arg counts in its stack size,
+ skip the part of stack space corresponding to the registers.
+ Otherwise, start copying to the beginning of the stack space,
+ by setting SKIP to 0. */
+#ifndef FIRST_PARM_CALLER_OFFSET
+ skip = 0;
+#else
+ skip = not_stack;
+#endif
+
+ if (GET_CODE (x) == CONST_DOUBLE && x != dconst0_rtx)
+ x = force_const_double_mem (x);
+
+ /* Loop over all the words allocated on the stack for this arg. */
+ /* We can do it by words, because any scalar bigger than a word
+ has a size a multiple of a word. */
+#ifndef PUSH_ARGS_REVERSED
+ for (i = not_stack; i < size; i++)
+#else
+ for (i = size - 1; i >= not_stack; i--)
+#endif
+ if (i >= not_stack + offset)
+ {
+ rtx wd;
+ rtx addr;
+ /* Get the next word of the value in WD. */
+ if (GET_CODE (x) == MEM)
+ {
+ rtx addr = memory_address (SImode,
+ plus_constant (XEXP (x, 0),
+ i * UNITS_PER_WORD));
+ /* Copy to a reg, since machine may lack
+ memory-to-memory move insns. */
+ wd = copy_to_reg (gen_rtx (MEM, SImode, addr));
+ }
+ else if (GET_CODE (x) == REG)
+ wd = gen_rtx (SUBREG, SImode, x, i);
+ else if (x == dconst0_rtx)
+ wd = const0_rtx;
+ else
+ abort ();
+
+ emit_push_insn (wd,
+ SImode, 0, align, 0, 0, 0, args_addr,
+ gen_rtx (CONST_INT, VOIDmode,
+ args_offset + (i - not_stack + skip) * UNITS_PER_WORD));
+ }
+ }
+ else
+ {
+ rtx addr;
+#ifdef PUSH_ROUNDING
+ if (args_addr == 0)
+ addr = gen_push_operand ();
+ else
+#endif
+ if (GET_CODE (args_so_far) == CONST_INT)
+ addr
+ = memory_address (mode,
+ plus_constant (args_addr, INTVAL (args_so_far)));
+ else
+ addr = memory_address (mode, gen_rtx (PLUS, Pmode, args_addr,
+ args_so_far));
+
+ emit_move_insn (gen_rtx (MEM, mode, addr), x);
+ }
+
+ ret:
+ /* If part should go in registers, copy that part
+ into the appropriate registers. Do this now, at the end,
+ since mem-to-mem copies above may do function calls. */
+ if (partial > 0)
+ move_block_to_reg (REGNO (reg), x, partial);
+
+ if (extra && args_addr == 0 && where_pad == stack_direction)
+ anti_adjust_stack (gen_rtx (CONST_INT, VOIDmode, extra));
+}
+\f
+/* Output a library call to function FUN (a SYMBOL_REF rtx)
+ (emitting the queue unless NO_QUEUE is nonzero),
+ for a value of mode OUTMODE,
+ with NARGS different arguments, passed as alternating rtx values
+ and machine_modes to convert them to.
+ The rtx values should have been passed through protect_from_queue already. */
+
+void
+emit_library_call (va_alist)
+ va_dcl
+{
+ register va_list p;
+ register int args_size = 0;
+ register int argnum;
+ enum machine_mode outmode;
+ int nargs;
+ rtx fun;
+ rtx orgfun;
+ int inc;
+ int count;
+ rtx *regvec;
+ rtx argblock = 0;
+ CUMULATIVE_ARGS args_so_far;
+ struct arg { rtx value; enum machine_mode mode; };
+ struct arg *argvec;
+ int old_inhibit_defer_pop = inhibit_defer_pop;
+ int stack_padding = 0;
+ int no_queue = 0;
+ rtx use_insns;
+
+ va_start (p);
+ orgfun = fun = va_arg (p, rtx);
+ no_queue = va_arg (p, int);
+ outmode = va_arg (p, enum machine_mode);
+ nargs = va_arg (p, int);
+
+ regvec = (rtx *) alloca (nargs * sizeof (rtx));
+
+ /* Copy all the libcall-arguments out of the varargs data
+ and into a vector ARGVEC. */
+ argvec = (struct arg *) alloca (nargs * sizeof (struct arg));
+ for (count = 0; count < nargs; count++)
+ {
+ rtx val = va_arg (p, rtx);
+ enum machine_mode mode = va_arg (p, enum machine_mode);
+
+ argvec[count].value = val;
+
+ /* Convert the arg value to the mode the library wants.
+ Also make sure it is a reasonable operand
+ for a move or push insn. */
+ /* ??? It is wrong to do it here; must do it earlier
+ where we know the signedness of the arg. */
+ if (GET_MODE (val) != mode && GET_MODE (val) != VOIDmode)
+ {
+ val = gen_reg_rtx (mode);
+ convert_move (val, argvec[count].value, 0);
+ }
+ else if (GET_CODE (val) != REG && GET_CODE (val) != MEM
+
+ && ! ((CONSTANT_P (val) || GET_CODE (val) == CONST_DOUBLE)
+ && LEGITIMATE_CONSTANT_P (val)))
+ val = force_operand (val, 0);
+
+ argvec[count].value = val;
+ argvec[count].mode = mode;
+ }
+ va_end (p);
+
+ /* If we have no actual push instructions, make space for all the args
+ right now. */
+#ifndef PUSH_ROUNDING
+ INIT_CUMULATIVE_ARGS (args_so_far, (tree)0);
+ for (count = 0; count < nargs; count++)
+ {
+ register enum machine_mode mode = argvec[count].mode;
+ register rtx reg;
+ register int partial;
+
+ reg = FUNCTION_ARG (args_so_far, mode, (tree)0, 1);
+#ifdef FUNCTION_ARG_PARTIAL_NREGS
+ partial = FUNCTION_ARG_PARTIAL_NREGS (args_so_far, mode, (tree)0, 1);
+#else
+ partial = 0;
+#endif
+ if (reg == 0 || partial != 0)
+ args_size += GET_MODE_SIZE (mode);
+ if (partial != 0)
+ args_size -= partial * GET_MODE_SIZE (SImode);
+ FUNCTION_ARG_ADVANCE (args_so_far, mode, (tree)0, 1);
+ }
+
+ if (args_size != 0)
+ {
+#ifdef STACK_ARGS_ADJUST
+ struct args_size size;
+ size.constant = args_size;
+ size.var = 0;
+ STACK_ARGS_ADJUST (size);
+ args_size = size.constant;
+#endif
+ argblock
+ = push_block (round_push (gen_rtx (CONST_INT, VOIDmode, args_size)));
+ }
+#endif /* no PUSH_ROUNDING */
+
+ INIT_CUMULATIVE_ARGS (args_so_far, (tree)0);
+
+#ifdef PUSH_ARGS_REVERSED
+ inc = -1;
+ argnum = nargs - 1;
+#else
+ inc = 1;
+ argnum = 0;
+#endif
+ args_size = stack_padding;
+
+ for (count = 0; count < nargs; count++, argnum += inc)
+ {
+ register enum machine_mode mode = argvec[argnum].mode;
+ register rtx val = argvec[argnum].value;
+ rtx reg;
+ int partial;
+ int arg_size;
+
+ reg = FUNCTION_ARG (args_so_far, mode, (tree)0, 1);
+ regvec[argnum] = reg;
+#ifdef FUNCTION_ARG_PARTIAL_NREGS
+ partial = FUNCTION_ARG_PARTIAL_NREGS (args_so_far, mode, (tree)0, 1);
+#else
+ partial = 0;
+#endif
+
+ if (reg != 0 && partial == 0)
+ emit_move_insn (reg, val);
+ else
+ emit_push_insn (val, mode, 0, 0, partial, reg, 0, argblock,
+ gen_rtx (CONST_INT, VOIDmode, args_size));
+
+ /* Compute size of stack space used by this argument. */
+ if (reg == 0 || partial != 0)
+ arg_size = GET_MODE_SIZE (mode);
+ else
+ arg_size = 0;
+ if (partial != 0)
+ arg_size
+ -= ((partial * UNITS_PER_WORD)
+ / (PARM_BOUNDARY / BITS_PER_UNIT)
+ * (PARM_BOUNDARY / BITS_PER_UNIT));
+
+ args_size += arg_size;
+ NO_DEFER_POP;
+ FUNCTION_ARG_ADVANCE (args_so_far, mode, (tree)0, 1);
+ }
+
+ /* For version 1.37, try deleting this entirely. */
+ if (! no_queue)
+ emit_queue ();
+
+ fun = prepare_call_address (fun, 0);
+
+ /* Any regs containing parms remain in use through the call. */
+ start_sequence ();
+ for (count = 0; count < nargs; count++)
+ if (regvec[count] != 0)
+ emit_insn (gen_rtx (USE, VOIDmode, regvec[count]));
+
+ use_insns = gen_sequence ();
+ end_sequence ();
+
+#ifdef STACK_BOUNDARY
+ args_size = (args_size + STACK_BYTES - 1) / STACK_BYTES * STACK_BYTES;
+#endif
+
+ /* Don't allow popping to be deferred, since then
+ cse'ing of library calls could delete a call and leave the pop. */
+ NO_DEFER_POP;
+ emit_call_1 (fun, get_identifier (XSTR (orgfun, 0)), args_size,
+ FUNCTION_ARG (args_so_far, VOIDmode, void_type_node, 1),
+ outmode != VOIDmode ? hard_libcall_value (outmode) : 0,
+ old_inhibit_defer_pop + 1, use_insns);
+ OK_DEFER_POP;
+}
+\f
+/* Expand an assignment that stores the value of FROM into TO.
+ If WANT_VALUE is nonzero, return an rtx for the value of TO.
+ (This may contain a QUEUED rtx.)
+ Otherwise, the returned value is not meaningful.
+
+ SUGGEST_REG is no longer actually used.
+ It used to mean, copy the value through a register
+ and return that register, if that is possible.
+ But now we do this if WANT_VALUE.
+
+ If the value stored is a constant, we return the constant. */
+
+rtx
+expand_assignment (to, from, want_value, suggest_reg)
+ tree to, from;
+ int want_value;
+ int suggest_reg;
+{
+ register rtx to_rtx = 0;
+
+ /* Don't crash if the lhs of the assignment was erroneous. */
+
+ if (TREE_CODE (to) == ERROR_MARK)
+ return expand_expr (from, 0, VOIDmode, 0);
+
+ /* Assignment of a structure component needs special treatment
+ if the structure component's rtx is not simply a MEM.
+ Assignment of an array element at a constant index
+ has the same problem. */
+
+ if (TREE_CODE (to) == COMPONENT_REF
+ || (TREE_CODE (to) == ARRAY_REF
+ && TREE_CODE (TREE_OPERAND (to, 1)) == INTEGER_CST
+ && TREE_CODE (TYPE_SIZE (TREE_TYPE (to))) == INTEGER_CST))
+ {
+ register enum machine_mode mode1;
+ int bitsize;
+ int volstruct = 0;
+ tree tem = to;
+ int bitpos = 0;
+ int unsignedp;
+
+ if (TREE_CODE (to) == COMPONENT_REF)
+ {
+ tree field = TREE_OPERAND (to, 1);
+ bitsize = TREE_INT_CST_LOW (DECL_SIZE (field)) * DECL_SIZE_UNIT (field);
+ mode1 = DECL_MODE (TREE_OPERAND (to, 1));
+ unsignedp = TREE_UNSIGNED (field);
+ }
+ else
+ {
+ mode1 = TYPE_MODE (TREE_TYPE (to));
+ bitsize = GET_MODE_BITSIZE (mode1);
+ unsignedp = TREE_UNSIGNED (TREE_TYPE (to));
+ }
+
+ /* Compute cumulative bit-offset for nested component-refs
+ and array-refs, and find the ultimate containing object. */
+
+ while (1)
+ {
+ if (TREE_CODE (tem) == COMPONENT_REF)
+ {
+ bitpos += DECL_OFFSET (TREE_OPERAND (tem, 1));
+ if (TREE_THIS_VOLATILE (tem))
+ volstruct = 1;
+ }
+ else if (TREE_CODE (tem) == ARRAY_REF
+ && TREE_CODE (TREE_OPERAND (tem, 1)) == INTEGER_CST
+ && TREE_CODE (TYPE_SIZE (TREE_TYPE (tem))) == INTEGER_CST)
+ {
+ bitpos += (TREE_INT_CST_LOW (TREE_OPERAND (tem, 1))
+ * TREE_INT_CST_LOW (TYPE_SIZE (TREE_TYPE (tem)))
+ * TYPE_SIZE_UNIT (TREE_TYPE (tem)));
+ }
+ else
+ break;
+ tem = TREE_OPERAND (tem, 0);
+ }
+ /* TEM is now the containing data object. */
+
+ /* If we are going to use store_bit_field and extract_bit_field,
+ make sure to_rtx will be safe for multiple use. */
+ if (mode1 == BImode && want_value)
+ tem = stabilize_reference (tem);
+
+ to_rtx = expand_expr (tem, 0, VOIDmode, 0);
+
+ return store_field (to_rtx, bitsize, bitpos, mode1, from,
+ (want_value
+ /* Spurious cast makes HPUX compiler happy. */
+ ? (enum machine_mode) TYPE_MODE (TREE_TYPE (to))
+ : VOIDmode),
+ unsignedp,
+ /* Required alignment of containing datum. */
+ TYPE_ALIGN (TREE_TYPE (tem)) / BITS_PER_UNIT);
+ }
+
+ /* Ordinary treatment. Expand TO to get a REG or MEM rtx.
+ Don't re-expand if it was expanded already (in COMPONENT_REF case). */
+
+ if (to_rtx == 0)
+ to_rtx = expand_expr (to, 0, VOIDmode, 0);
+
+ /* Compute FROM and store the value in the rtx we got. */
+
+ return store_expr (from, to_rtx, want_value);
+}
+
+/* Generate code for computing expression EXP,
+ and storing the value into TARGET.
+ Returns TARGET or an equivalent value.
+ TARGET may contain a QUEUED rtx.
+
+ If SUGGEST_REG is nonzero, copy the value through a register
+ and return that register, if that is possible.
+
+ If the value stored is a constant, we return the constant. */
+
+rtx
+store_expr (exp, target, suggest_reg)
+ register tree exp;
+ register rtx target;
+ int suggest_reg;
+{
+ register rtx temp;
+ int dont_return_target = 0;
+
+ /* Copying a non-constant CONSTRUCTOR needs special treatment. */
+
+ if (TREE_CODE (exp) == CONSTRUCTOR && ! TREE_LITERAL (exp))
+ {
+ store_constructor (exp, target);
+ return target;
+ }
+
+ if (suggest_reg && GET_CODE (target) == MEM && GET_MODE (target) != BLKmode)
+ /* If target is in memory and caller wants value in a register instead,
+ arrange that. Pass TARGET as target for expand_expr so that,
+ if EXP is another assignment, SUGGEST_REG will be nonzero for it.
+ We know expand_expr will not use the target in that case. */
+ {
+ temp = expand_expr (exp, cse_not_expected ? 0 : target,
+ GET_MODE (target), 0);
+ if (GET_MODE (temp) != BLKmode && GET_MODE (temp) != VOIDmode)
+ temp = copy_to_reg (temp);
+ dont_return_target = 1;
+ }
+ else if (queued_subexp_p (target))
+ /* If target contains a postincrement, it is not safe
+ to use as the returned value. It would access the wrong
+ place by the time the queued increment gets output.
+ So copy the value through a temporary and use that temp
+ as the result. */
+ {
+ temp = expand_expr (exp, 0, GET_MODE (target), 0);
+ if (GET_MODE (temp) != BLKmode && GET_MODE (temp) != VOIDmode)
+ temp = copy_to_reg (temp);
+ dont_return_target = 1;
+ }
+ else
+ {
+ temp = expand_expr (exp, target, GET_MODE (target), 0);
+ /* DO return TARGET if it's a specified hardware register.
+ expand_return relies on this. */
+ if (!(target && GET_CODE (target) == REG
+ && REGNO (target) < FIRST_PSEUDO_REGISTER)
+ && (CONSTANT_P (temp) || GET_CODE (temp) == CONST_DOUBLE))
+ dont_return_target = 1;
+ }
+
+ /* If value was not generated in the target, store it there.
+ Convert the value to TARGET's type first if nec. */
+
+ if (temp != target && TREE_CODE (exp) != ERROR_MARK)
+ {
+ target = protect_from_queue (target, 1);
+ if (GET_MODE (temp) != GET_MODE (target)
+ && GET_MODE (temp) != VOIDmode)
+ {
+ int unsignedp = TREE_UNSIGNED (TREE_TYPE (exp));
+ if (dont_return_target)
+ {
+ /* In this case, we will return TEMP,
+ so make sure it has the proper mode.
+ But don't forget to store the value into TARGET. */
+ temp = convert_to_mode (GET_MODE (target), temp, unsignedp);
+ emit_move_insn (target, temp);
+ }
+ else
+ convert_move (target, temp, unsignedp);
+ }
+
+ else if (GET_MODE (temp) == BLKmode)
+ emit_block_move (target, temp, expr_size (exp),
+ TYPE_ALIGN (TREE_TYPE (exp)) / BITS_PER_UNIT);
+ else
+ emit_move_insn (target, temp);
+ }
+ if (dont_return_target)
+ return temp;
+ return target;
+}
+\f
+/* Store the value of constructor EXP into the rtx TARGET.
+ TARGET is either a REG or a MEM. */
+
+static void
+store_constructor (exp, target)
+ tree exp;
+ rtx target;
+{
+ /* Don't try copying piece by piece into a hard register
+ since that is vulnerable to being clobbered by EXP.
+ Instead, construct in a pseudo register and then copy it all. */
+ if (GET_CODE (target) == REG && REGNO (target) < FIRST_PSEUDO_REGISTER)
+ {
+ rtx temp = gen_reg_rtx (GET_MODE (target));
+ store_constructor (exp, temp);
+ emit_move_insn (target, temp);
+ return;
+ }
+
+ if (TREE_CODE (TREE_TYPE (exp)) == RECORD_TYPE)
+ {
+ register tree elt;
+
+ /* If the constructor has fewer fields than the structure,
+ clear the whole structure first. */
+
+ if (list_length (CONSTRUCTOR_ELTS (exp))
+ != list_length (TYPE_FIELDS (TREE_TYPE (exp))))
+ clear_storage (target, int_size_in_bytes (TREE_TYPE (exp)));
+ else
+ /* Inform later passes that the old value is dead. */
+ emit_insn (gen_rtx (CLOBBER, VOIDmode, target));
+
+ /* Store each element of the constructor into
+ the corresponding field of TARGET. */
+
+ for (elt = CONSTRUCTOR_ELTS (exp); elt; elt = TREE_CHAIN (elt))
+ {
+ register tree field = TREE_PURPOSE (elt);
+ register enum machine_mode mode;
+ int bitsize;
+ int bitpos;
+ int unsignedp;
+
+ bitsize = TREE_INT_CST_LOW (DECL_SIZE (field)) * DECL_SIZE_UNIT (field);
+ mode = DECL_MODE (field);
+ unsignedp = TREE_UNSIGNED (field);
+
+ bitpos = DECL_OFFSET (field);
+
+ store_field (target, bitsize, bitpos, mode, TREE_VALUE (elt),
+ /* The alignment of TARGET is
+ at least what its type requires. */
+ VOIDmode, 0,
+ TYPE_ALIGN (TREE_TYPE (exp)) / BITS_PER_UNIT);
+ }
+ }
+ else if (TREE_CODE (TREE_TYPE (exp)) == ARRAY_TYPE)
+ {
+ register tree elt;
+ register int i;
+ tree domain = TYPE_DOMAIN (TREE_TYPE (exp));
+ int minelt = TREE_INT_CST_LOW (TYPE_MIN_VALUE (domain));
+ int maxelt = TREE_INT_CST_LOW (TYPE_MAX_VALUE (domain));
+ tree elttype = TREE_TYPE (TREE_TYPE (exp));
+
+ /* If the constructor has fewer fields than the structure,
+ clear the whole structure first. */
+
+ if (list_length (CONSTRUCTOR_ELTS (exp)) < maxelt - minelt + 1)
+ clear_storage (target, maxelt - minelt + 1);
+ else
+ /* Inform later passes that the old value is dead. */
+ emit_insn (gen_rtx (CLOBBER, VOIDmode, target));
+
+ /* Store each element of the constructor into
+ the corresponding element of TARGET, determined
+ by counting the elements. */
+ for (elt = CONSTRUCTOR_ELTS (exp), i = 0;
+ elt;
+ elt = TREE_CHAIN (elt), i++)
+ {
+ register enum machine_mode mode;
+ int bitsize;
+ int bitpos;
+ int unsignedp;
+
+ mode = TYPE_MODE (elttype);
+ bitsize = GET_MODE_BITSIZE (mode);
+ unsignedp = TREE_UNSIGNED (elttype);
+
+ bitpos = (i * TREE_INT_CST_LOW (TYPE_SIZE (elttype))
+ * TYPE_SIZE_UNIT (elttype));
+
+ store_field (target, bitsize, bitpos, mode, TREE_VALUE (elt),
+ /* The alignment of TARGET is
+ at least what its type requires. */
+ VOIDmode, 0,
+ TYPE_ALIGN (TREE_TYPE (exp)) / BITS_PER_UNIT);
+ }
+ }
+}
+
+/* Store the value of EXP (an expression tree)
+ into a subfield of TARGET which has mode MODE and occupies
+ BITSIZE bits, starting BITPOS bits from the start of TARGET.
+
+ If VALUE_MODE is VOIDmode, return nothing in particular.
+ UNSIGNEDP is not used in this case.
+
+ Otherwise, return an rtx for the value stored. This rtx
+ has mode VALUE_MODE if that is convenient to do.
+ In this case, UNSIGNEDP must be nonzero if the value is an unsigned type.
+
+ ALIGN is the alignment that TARGET is known to have, measured in bytes. */
+
+static rtx
+store_field (target, bitsize, bitpos, mode, exp, value_mode, unsignedp, align)
+ rtx target;
+ int bitsize, bitpos;
+ enum machine_mode mode;
+ tree exp;
+ enum machine_mode value_mode;
+ int unsignedp;
+ int align;
+{
+ /* If the structure is in a register or if the component
+ is a bit field, we cannot use addressing to access it.
+ Use bit-field techniques or SUBREG to store in it. */
+
+ if (mode == BImode || GET_CODE (target) == REG
+ || GET_CODE (target) == SUBREG)
+ {
+ store_bit_field (target, bitsize, bitpos,
+ mode,
+ expand_expr (exp, 0, VOIDmode, 0),
+ align);
+ if (value_mode != VOIDmode)
+ return extract_bit_field (target, bitsize, bitpos, unsignedp,
+ 0, value_mode, 0, align);
+ return const0_rtx;
+ }
+ else
+ {
+ rtx addr = XEXP (target, 0);
+ rtx to_rtx;
+
+ /* If a value is wanted, it must be the lhs;
+ so make the address stable for multiple use. */
+
+ if (value_mode != VOIDmode && GET_CODE (addr) != REG
+ && ! CONSTANT_ADDRESS_P (addr))
+ addr = copy_to_reg (addr);
+
+ /* Now build a reference to just the desired component. */
+
+ to_rtx = change_address (target, mode,
+ plus_constant (addr,
+ (bitpos / BITS_PER_UNIT)));
+ MEM_IN_STRUCT_P (to_rtx) = 1;
+
+ return store_expr (exp, to_rtx, value_mode != VOIDmode);
+ }
+}
+\f
+/* Given an rtx VALUE that may contain additions and multiplications,
+ return an equivalent value that just refers to a register or memory.
+ This is done by generating instructions to perform the arithmetic
+ and returning a pseudo-register containing the value. */
+
+rtx
+force_operand (value, target)
+ rtx value, target;
+{
+ register optab binoptab = 0;
+ register rtx op2;
+ /* Use subtarget as the target for operand 0 of a binary operation. */
+ register rtx subtarget = (target != 0 && GET_CODE (target) == REG ? target : 0);
+
+ if (GET_CODE (value) == PLUS)
+ binoptab = add_optab;
+ else if (GET_CODE (value) == MINUS)
+ binoptab = sub_optab;
+ else if (GET_CODE (value) == MULT)
+ {
+ op2 = XEXP (value, 1);
+ if (!CONSTANT_P (op2)
+ && !(GET_CODE (op2) == REG && op2 != subtarget))
+ subtarget = 0;
+ return expand_mult (GET_MODE (value),
+ force_operand (XEXP (value, 0), subtarget),
+ force_operand (op2, 0),
+ target, 0);
+ }
+
+ if (binoptab)
+ {
+ op2 = XEXP (value, 1);
+ if (!CONSTANT_P (op2)
+ && !(GET_CODE (op2) == REG && op2 != subtarget))
+ subtarget = 0;
+ if (binoptab == sub_optab
+ && GET_CODE (op2) == CONST_INT && INTVAL (op2) < 0)
+ {
+ binoptab = add_optab;
+ op2 = gen_rtx (CONST_INT, VOIDmode, - INTVAL (op2));
+ }
+ return expand_binop (GET_MODE (value), binoptab,
+ force_operand (XEXP (value, 0), subtarget),
+ force_operand (op2, 0),
+ target, 0, OPTAB_LIB_WIDEN);
+ /* We give UNSIGNEP = 0 to expand_binop
+ because the only operations we are expanding here are signed ones. */
+ }
+ return value;
+}
+\f
+/* expand_expr: generate code for computing expression EXP.
+ An rtx for the computed value is returned. The value is never null.
+ In the case of a void EXP, const0_rtx is returned.
+
+ The value may be stored in TARGET if TARGET is nonzero.
+ TARGET is just a suggestion; callers must assume that
+ the rtx returned may not be the same as TARGET.
+
+ If TARGET is CONST0_RTX, it means that the value will be ignored.
+
+ If TMODE is not VOIDmode, it suggests generating the
+ result in mode TMODE. But this is done only when convenient.
+ Otherwise, TMODE is ignored and the value generated in its natural mode.
+ TMODE is just a suggestion; callers must assume that
+ the rtx returned may not have mode TMODE.
+
+ If MODIFIER is EXPAND_SUM then when EXP is an addition
+ we can return an rtx of the form (MULT (REG ...) (CONST_INT ...))
+ or a nest of (PLUS ...) and (MINUS ...) where the terms are
+ products as above, or REG or MEM, or constant.
+ Ordinarily in such cases we would output mul or add instructions
+ and then return a pseudo reg containing the sum.
+
+ If MODIFIER is EXPAND_CONST_ADDRESS then it is ok to return
+ a MEM rtx whose address is a constant that isn't a legitimate address. */
+
+/* Subroutine of expand_expr:
+ save the non-copied parts (LIST) of an expr (LHS), and return a list
+ which can restore these values to their previous values,
+ should something modify their storage. */
+static tree
+save_noncopied_parts (lhs, list)
+ tree lhs;
+ tree list;
+{
+ tree tail;
+ tree parts = 0;
+
+ for (tail = list; tail; tail = TREE_CHAIN (tail))
+ if (TREE_CODE (TREE_VALUE (tail)) == TREE_LIST)
+ parts = chainon (parts, save_noncopied_parts (lhs, TREE_VALUE (tail)));
+ else
+ {
+ tree part = TREE_VALUE (tail);
+ tree part_type = TREE_TYPE (part);
+ tree to_be_saved = build (COMPONENT_REF, part_type, lhs, part, 0);
+ rtx target = assign_stack_local (TYPE_MODE (part_type),
+ int_size_in_bytes (part_type));
+ if (! memory_address_p (TYPE_MODE (part_type), XEXP (target, 0)))
+ target = change_address (target, TYPE_MODE (part_type), 0);
+ parts = tree_cons (to_be_saved,
+ build (RTL_EXPR, part_type, 0, (tree) target),
+ parts);
+ store_expr (TREE_PURPOSE (parts), RTL_EXPR_RTL (TREE_VALUE (parts)), 0);
+ }
+ return parts;
+}
+
+/* Subroutine of expand_expr:
+ save the non-copied parts (LIST) of an expr (LHS), and return a list
+ which can restore these values to their previous values,
+ should something modify their storage. */
+static tree
+init_noncopied_parts (lhs, list)
+ tree lhs;
+ tree list;
+{
+ tree tail;
+ tree parts = 0;
+
+ for (tail = list; tail; tail = TREE_CHAIN (tail))
+ if (TREE_CODE (TREE_VALUE (tail)) == TREE_LIST)
+ parts = chainon (parts, init_noncopied_parts (lhs, TREE_VALUE (tail)));
+ else
+ {
+ tree part = TREE_VALUE (tail);
+ tree part_type = TREE_TYPE (part);
+ tree to_be_initialized = build (COMPONENT_REF, part_type, lhs, part, 0);
+ parts = tree_cons (TREE_PURPOSE (tail), to_be_initialized, parts);
+ }
+ return parts;
+}
+
+/* Subroutine of expand_expr:
+ return the target to use when recursively expanding
+ the first operand of an arithmetic operation. */
+
+static rtx
+validate_subtarget (subtarget, otherop)
+ rtx subtarget;
+ tree otherop;
+{
+ if (TREE_LITERAL (otherop))
+ return subtarget;
+ if (TREE_CODE (otherop) == VAR_DECL
+ && DECL_RTL (otherop) != subtarget)
+ return subtarget;
+ return 0;
+}
+
+static int
+fixed_type_p (exp)
+ tree exp;
+{
+ if (TREE_CODE (exp) == PARM_DECL
+ || TREE_CODE (exp) == VAR_DECL
+ || TREE_CODE (exp) == CALL_EXPR || TREE_CODE (exp) == NEW_EXPR
+ || TREE_CODE (exp) == COMPONENT_REF
+ || TREE_CODE (exp) == ARRAY_REF)
+ return 1;
+ return 0;
+}
+
+rtx
+expand_expr (exp, target, tmode, modifier)
+ register tree exp;
+ rtx target;
+ enum machine_mode tmode;
+ enum expand_modifier modifier;
+{
+ extern rtx (*lang_expand_expr)();
+ register rtx op0, op1, temp;
+ tree type = TREE_TYPE (exp);
+ register enum machine_mode mode = TYPE_MODE (type);
+ register enum tree_code code = TREE_CODE (exp);
+ optab this_optab;
+ int negate_1;
+ /* Use subtarget as the target for operand 0 of a binary operation. */
+ rtx subtarget = (target != 0 && GET_CODE (target) == REG ? target : 0);
+ rtx original_target = target;
+ int ignore = target == const0_rtx;
+
+ /* Don't use hard regs as subtargets, because the combiner
+ can only handle pseudo regs. */
+ if (subtarget && REGNO (subtarget) < FIRST_PSEUDO_REGISTER)
+ subtarget = 0;
+ /* Avoid subtargets inside loops,
+ since they hide some invariant expressions. */
+ if (optimize && inside_loop ())
+ subtarget = 0;
+
+ if (ignore) target = 0, original_target = 0;
+
+ /* If will do cse, generate all results into registers
+ since 1) that allows cse to find more things
+ and 2) otherwise cse could produce an insn the machine
+ cannot support. */
+
+ if (! cse_not_expected && mode != BLKmode)
+ target = subtarget;
+
+ /* No sense saving up arithmetic to be done
+ if it's all in the wrong mode to form part of an address.
+ And force_operand won't know whether to sign-extend or zero-extend. */
+
+ if (mode != Pmode && modifier == EXPAND_SUM)
+ modifier = EXPAND_NORMAL;
+
+ switch (code)
+ {
+ case PARM_DECL:
+ if (DECL_RTL (exp) == 0)
+ {
+ error_with_decl (exp, "prior parameter's size depends on `%s'");
+ return const0_rtx;
+ }
+
+ case FUNCTION_DECL:
+ case VAR_DECL:
+ case RESULT_DECL:
+ if (DECL_RTL (exp) == 0)
+ abort ();
+ /* Must mark EXP used because it might be a compiler-generated
+ variable used by a compiler-generated expression. */
+ TREE_USED (exp) = 1;
+ /* This is the case of an array whose size is to be determined
+ from its initializer, while the initializer is still being parsed.
+ See expand_decl. */
+ if (GET_CODE (DECL_RTL (exp)) == MEM
+ && GET_CODE (XEXP (DECL_RTL (exp), 0)) == REG)
+ return change_address (DECL_RTL (exp), GET_MODE (DECL_RTL (exp)),
+ XEXP (DECL_RTL (exp), 0));
+ if (GET_CODE (DECL_RTL (exp)) == MEM
+ && modifier != EXPAND_CONST_ADDRESS)
+ {
+ /* DECL_RTL probably contains a constant address.
+ On RISC machines where a constant address isn't valid,
+ make some insns to get that address into a register. */
+ if (!memory_address_p (DECL_MODE (exp), XEXP (DECL_RTL (exp), 0))
+ || (flag_force_addr
+ && CONSTANT_ADDRESS_P (XEXP (DECL_RTL (exp), 0))))
+ return change_address (DECL_RTL (exp), VOIDmode,
+ copy_rtx (XEXP (DECL_RTL (exp), 0)));
+ }
+ return DECL_RTL (exp);
+
+ case INTEGER_CST:
+ if (GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_INT)
+ return gen_rtx (CONST_INT, VOIDmode, TREE_INT_CST_LOW (exp));
+ /* Generate immediate CONST_DOUBLE
+ which will be turned into memory by reload if necessary. */
+ return immed_double_const (TREE_INT_CST_LOW (exp),
+ TREE_INT_CST_HIGH (exp),
+ mode);
+
+ case CONST_DECL:
+ return expand_expr (DECL_INITIAL (exp), target, VOIDmode, 0);
+
+ case REAL_CST:
+ /* If optimized, generate immediate CONST_DOUBLE
+ which will be turned into memory by reload if necessary. */
+ if (!cse_not_expected)
+ return immed_real_const (exp);
+ case COMPLEX_CST:
+ case STRING_CST:
+ if (! TREE_CST_RTL (exp))
+ output_constant_def (exp);
+
+ /* TREE_CST_RTL probably contains a constant address.
+ On RISC machines where a constant address isn't valid,
+ make some insns to get that address into a register. */
+ if (GET_CODE (TREE_CST_RTL (exp)) == MEM
+ && modifier != EXPAND_CONST_ADDRESS
+ && !memory_address_p (mode, XEXP (TREE_CST_RTL (exp), 0)))
+ return change_address (TREE_CST_RTL (exp), VOIDmode,
+ copy_rtx (XEXP (TREE_CST_RTL (exp), 0)));
+ return TREE_CST_RTL (exp);
+
+ case SAVE_EXPR:
+ if (SAVE_EXPR_RTL (exp) == 0)
+ {
+ rtx reg = gen_reg_rtx (mode);
+ SAVE_EXPR_RTL (exp) = reg;
+ store_expr (TREE_OPERAND (exp, 0), reg, 0);
+ if (!optimize)
+ save_expr_regs = gen_rtx (EXPR_LIST, VOIDmode, reg,
+ save_expr_regs);
+ }
+ /* Don't let the same rtl node appear in two places. */
+ return SAVE_EXPR_RTL (exp);
+
+ case IF_STMT:
+ emit_line_note (STMT_SOURCE_FILE (exp), STMT_SOURCE_LINE (exp));
+
+ /* Exit flag is 0 for now. */
+ expand_start_cond (STMT_COND (exp), 0);
+ expand_expr_stmt (STMT_THEN (exp));
+ if (STMT_ELSE (exp) == 0)
+ expand_end_cond ();
+ else
+ {
+ expand_start_else ();
+ expand_expr_stmt (STMT_ELSE (exp));
+ expand_end_else ();
+ }
+ return const0_rtx;
+
+ case LOOP_STMT:
+ {
+ tree vars = STMT_LOOP_VARS (exp);
+
+ emit_line_note (STMT_SOURCE_FILE (exp), STMT_SOURCE_LINE (exp));
+
+ while (vars)
+ {
+ if (DECL_RTL (vars) == 0)
+ expand_decl (vars);
+ expand_decl_init (vars);
+ vars = TREE_CHAIN (vars);
+ }
+
+ if (TREE_READONLY (exp))
+ {
+ /* Looks like a `while-do' loop. */
+ expand_start_loop (1);
+ expand_exit_loop_if_false (STMT_LOOP_COND (exp));
+ expand_expr_stmt (STMT_LOOP_BODY (exp));
+ expand_end_loop ();
+ }
+ else
+ {
+ /* Looks like a `do-while' loop. */
+ expand_start_loop_continue_elsewhere (1);
+ expand_expr_stmt (STMT_LOOP_BODY (exp));
+ expand_loop_continue_here ();
+ expand_exit_loop_if_false (STMT_LOOP_COND (exp));
+ expand_end_loop ();
+ }
+
+ if (obey_regdecls)
+ for (vars = STMT_LOOP_VARS (exp); vars; vars = TREE_CHAIN (vars))
+ use_variable (DECL_RTL (vars));
+ }
+ return const0_rtx;
+
+ case LET_STMT:
+ {
+ tree vars = STMT_VARS (exp);
+
+ TREE_USED (exp) = 1;
+
+ /* If VARS have not yet been expanded, expand them now. */
+ while (vars)
+ {
+ if (DECL_RTL (vars) == 0)
+ expand_decl (vars);
+ /* Have to initialize these vars whereever this LET_STMT
+ is expanded. */
+ expand_decl_init (vars);
+ vars = TREE_CHAIN (vars);
+ }
+
+ temp = expand_expr (STMT_BODY (exp), target, tmode, modifier);
+
+ if (obey_regdecls)
+ for (vars = STMT_VARS (exp); vars; vars = TREE_CHAIN (vars))
+ /* TYPE_DECLs do not have rtl. */
+ if (DECL_RTL (vars))
+ use_variable (DECL_RTL (vars));
+
+ return temp;
+ }
+
+ case RTL_EXPR:
+ if (RTL_EXPR_SEQUENCE (exp) == const0_rtx)
+ abort ();
+ emit_insns (RTL_EXPR_SEQUENCE (exp));
+ RTL_EXPR_SEQUENCE (exp) = const0_rtx;
+ return RTL_EXPR_RTL (exp);
+
+ case CONSTRUCTOR:
+ /* All elts simple constants => refer to a constant in memory. */
+ if (TREE_STATIC (exp))
+ /* For aggregate types with non-BLKmode modes,
+ this should ideally construct a CONST_INT. */
+ {
+ rtx constructor = output_constant_def (exp);
+ if (! memory_address_p (GET_MODE (constructor),
+ XEXP (constructor, 0)))
+ constructor = change_address (constructor, VOIDmode,
+ XEXP (constructor, 0));
+ return constructor;
+ }
+
+ if (ignore)
+ {
+ tree elt;
+ for (elt = CONSTRUCTOR_ELTS (exp); elt; elt = TREE_CHAIN (elt))
+ expand_expr (TREE_VALUE (elt), const0_rtx, VOIDmode, 0);
+ return const0_rtx;
+ }
+ else
+ {
+ if (target == 0)
+ target = gen_rtx (MEM, TYPE_MODE (TREE_TYPE (exp)),
+ get_structure_value_addr (expr_size (exp)));
+ store_expr (exp, target, 0);
+ return target;
+ }
+
+ case INDIRECT_REF:
+ {
+ tree exp1 = TREE_OPERAND (exp, 0);
+ tree exp2;
+
+ /* A SAVE_EXPR as the address in an INDIRECT_EXPR is generated
+ for *PTR += ANYTHING where PTR is put inside the SAVE_EXPR.
+ This code has the same general effect as simply doing
+ expand_expr on the save expr, except that the expression PTR
+ is computed for use as a memory address. This means different
+ code, suitable for indexing, may be generated. */
+ if (TREE_CODE (exp1) == SAVE_EXPR
+ && SAVE_EXPR_RTL (exp1) == 0
+ && TREE_CODE (exp2 = TREE_OPERAND (exp1, 0)) != ERROR_MARK
+ && TYPE_MODE (TREE_TYPE (exp1)) == Pmode
+ && TYPE_MODE (TREE_TYPE (exp2)) == Pmode)
+ {
+ temp = expand_expr (TREE_OPERAND (exp1, 0), 0, VOIDmode, EXPAND_SUM);
+ op0 = memory_address (mode, temp);
+ op0 = copy_all_regs (op0);
+ SAVE_EXPR_RTL (exp1) = op0;
+ }
+ else
+ {
+ if (modifier == EXPAND_INTO_STACK
+ && original_target
+ && GET_CODE (original_target) == MEM)
+ op0 = expand_expr (exp1, XEXP (original_target, 0),
+ VOIDmode, EXPAND_INTO_STACK);
+ else
+ op0 = expand_expr (exp1, 0, VOIDmode, EXPAND_SUM);
+ op0 = memory_address (mode, op0);
+ }
+ }
+ temp = gen_rtx (MEM, mode, op0);
+ /* If address was computed by addition,
+ mark this as an element of an aggregate. */
+ if (TREE_CODE (TREE_OPERAND (exp, 0)) == PLUS_EXPR
+ || (TREE_CODE (TREE_OPERAND (exp, 0)) == SAVE_EXPR
+ && TREE_CODE (TREE_OPERAND (TREE_OPERAND (exp, 0), 0)) == PLUS_EXPR))
+ MEM_IN_STRUCT_P (temp) = 1;
+ MEM_VOLATILE_P (temp) = TREE_THIS_VOLATILE (exp) || flag_volatile;
+ RTX_UNCHANGING_P (temp) = TREE_READONLY (exp);
+ return temp;
+
+ case ARRAY_REF:
+ if (TREE_CODE (TREE_OPERAND (exp, 1)) != INTEGER_CST
+ || TREE_CODE (TYPE_SIZE (TREE_TYPE (exp))) != INTEGER_CST)
+ {
+ /* Nonconstant array index or nonconstant element size.
+ Generate the tree for *(&array+index) and expand that,
+ except do it in a language-independent way
+ and don't complain about non-lvalue arrays.
+ `mark_addressable' should already have been called
+ for any array for which this case will be reached. */
+
+ tree array_adr = build1 (ADDR_EXPR, TYPE_POINTER_TO (type),
+ TREE_OPERAND (exp, 0));
+ tree index = TREE_OPERAND (exp, 1);
+ tree elt;
+
+ /* Convert the integer argument to a type the same size as a pointer
+ so the multiply won't overflow spuriously. */
+ if (TYPE_PRECISION (TREE_TYPE (index)) != POINTER_SIZE)
+ index = convert (type_for_size (POINTER_SIZE, 0), index);
+
+ /* The array address isn't volatile even if the array is. */
+ TREE_VOLATILE (array_adr) = 0;
+
+ elt = build1 (INDIRECT_REF, type,
+ fold (build (PLUS_EXPR, TYPE_POINTER_TO (type),
+ array_adr,
+ fold (build (MULT_EXPR,
+ TYPE_POINTER_TO (type),
+ index, size_in_bytes (type))))));
+
+ return expand_expr (elt, target, tmode, modifier);
+ }
+
+ /* Fold an expression like: "foo"[2].
+ This is not done in fold so it won't happen inside &. */
+ {
+ int i;
+ tree arg0 = TREE_OPERAND (exp, 0);
+ tree arg1 = TREE_OPERAND (exp, 1);
+
+ if (TREE_CODE (arg0) == STRING_CST
+ && TREE_CODE (arg1) == INTEGER_CST
+ && !TREE_INT_CST_HIGH (arg1)
+ && (i = TREE_INT_CST_LOW (arg1)) < TREE_STRING_LENGTH (arg0))
+ {
+ if (TREE_TYPE (TREE_TYPE (arg0)) == integer_type_node)
+ {
+ exp = build_int_2 (((int *)TREE_STRING_POINTER (arg0))[i], 0);
+ TREE_TYPE (exp) = integer_type_node;
+ return expand_expr (exp, target, tmode, modifier);
+ }
+ if (TREE_TYPE (TREE_TYPE (arg0)) == char_type_node)
+ {
+ exp = build_int_2 (TREE_STRING_POINTER (arg0)[i], 0);
+ TREE_TYPE (exp) = integer_type_node;
+ return expand_expr (convert (TREE_TYPE (TREE_TYPE (arg0)), exp), target, tmode, modifier);
+ }
+ }
+ }
+
+ /* If this is a constant index into a constant array,
+ just get the value from the array. */
+ if (TREE_READONLY (TREE_OPERAND (exp, 0))
+ && ! TREE_VOLATILE (TREE_OPERAND (exp, 0))
+ && TREE_CODE (TREE_TYPE (TREE_OPERAND (exp, 0))) == ARRAY_TYPE
+ && TREE_LITERAL (TREE_OPERAND (exp, 1))
+ && TREE_CODE (TREE_OPERAND (exp, 0)) == VAR_DECL
+ && DECL_INITIAL (TREE_OPERAND (exp, 0))
+ && TREE_CODE (DECL_INITIAL (TREE_OPERAND (exp, 0))) != ERROR_MARK)
+ {
+ tree index = fold (TREE_OPERAND (exp, 1));
+ if (TREE_CODE (index) == INTEGER_CST)
+ {
+ int i = TREE_INT_CST_LOW (index);
+ tree init = CONSTRUCTOR_ELTS (DECL_INITIAL (TREE_OPERAND (exp, 0)));
+
+ while (init && i--)
+ init = TREE_CHAIN (init);
+ if (init)
+ return expand_expr (fold (TREE_VALUE (init)), target, tmode, modifier);
+ }
+ }
+ /* Treat array-ref with constant index as a component-ref. */
+
+ case COMPONENT_REF:
+ {
+ register enum machine_mode mode1;
+ int volstruct = 0;
+ int bitsize;
+ tree tem = exp;
+ int bitpos = 0;
+ int unsignedp;
+
+ if (TREE_CODE (exp) == COMPONENT_REF)
+ {
+ tree field = TREE_OPERAND (exp, 1);
+ bitsize = TREE_INT_CST_LOW (DECL_SIZE (field)) * DECL_SIZE_UNIT (field);
+ mode1 = DECL_MODE (field);
+ unsignedp = TREE_UNSIGNED (field);
+ }
+ else
+ {
+ mode1 = TYPE_MODE (TREE_TYPE (exp));
+ bitsize = GET_MODE_BITSIZE (mode1);
+ unsignedp = TREE_UNSIGNED (TREE_TYPE (exp));
+ }
+
+ /* Compute cumulative bit-offset for nested component-refs
+ and array-refs, and find the ultimate containing object. */
+
+ while (1)
+ {
+ if (TREE_CODE (tem) == COMPONENT_REF)
+ {
+ bitpos += DECL_OFFSET (TREE_OPERAND (tem, 1));
+ if (TREE_THIS_VOLATILE (tem))
+ volstruct = 1;
+ }
+ else if (TREE_CODE (tem) == ARRAY_REF
+ && TREE_CODE (TREE_OPERAND (tem, 1)) == INTEGER_CST
+ && TREE_CODE (TYPE_SIZE (TREE_TYPE (tem))) == INTEGER_CST)
+ {
+ bitpos += (TREE_INT_CST_LOW (TREE_OPERAND (tem, 1))
+ * TREE_INT_CST_LOW (TYPE_SIZE (TREE_TYPE (tem)))
+ * TYPE_SIZE_UNIT (TREE_TYPE (tem)));
+ }
+ else
+ break;
+ tem = TREE_OPERAND (tem, 0);
+ }
+
+ op0 = expand_expr (tem, 0, VOIDmode,
+ (modifier == EXPAND_CONST_ADDRESS
+ ? modifier : EXPAND_NORMAL));
+
+ if (mode1 == BImode || GET_CODE (op0) == REG
+ || GET_CODE (op0) == SUBREG)
+ return extract_bit_field (op0, bitsize, bitpos, unsignedp,
+ target, mode, tmode,
+ TYPE_ALIGN (TREE_TYPE (tem)) / BITS_PER_UNIT);
+ /* Get a reference to just this component. */
+ if (modifier == EXPAND_CONST_ADDRESS)
+ op0 = gen_rtx (MEM, mode1, plus_constant (XEXP (op0, 0),
+ (bitpos / BITS_PER_UNIT)));
+ else
+ op0 = change_address (op0, mode1,
+ plus_constant (XEXP (op0, 0),
+ (bitpos / BITS_PER_UNIT)));
+ MEM_IN_STRUCT_P (op0) = 1;
+ MEM_VOLATILE_P (op0) |= volstruct;
+ /* If OP0 is in the shared structure-value stack slot,
+ and it is not BLKmode, copy it into a register.
+ The shared slot may be clobbered at any time by another call.
+ BLKmode is safe because our caller will either copy the value away
+ or take another component and come back here. */
+ if (mode != BLKmode
+ && TREE_CODE (TREE_OPERAND (exp, 0)) == CALL_EXPR
+ && TYPE_MODE (TREE_TYPE (TREE_OPERAND (exp, 0))) == BLKmode)
+ op0 = copy_to_reg (op0);
+ if (mode == mode1 || mode1 == BLKmode || mode1 == tmode)
+ return op0;
+ if (target == 0)
+ target = gen_reg_rtx (tmode != VOIDmode ? tmode : mode);
+ convert_move (target, op0, unsignedp);
+ return target;
+ }
+
+ /* Intended for a reference to a buffer of a file-object in Pascal.
+ But it's not certain that a special tree code will really be
+ necessary for these. INDIRECT_REF might work for them. */
+ case BUFFER_REF:
+ abort ();
+
+ case WITH_CLEANUP_EXPR:
+ if (RTL_EXPR_RTL (exp) == 0)
+ {
+ RTL_EXPR_RTL (exp)
+ = expand_expr (TREE_OPERAND (exp, 0), target, tmode, modifier);
+ cleanups_this_call = tree_cons (0, TREE_OPERAND (exp, 2), cleanups_this_call);
+ /* That's it for this cleanup. */
+ TREE_OPERAND (exp, 2) = 0;
+ }
+ return RTL_EXPR_RTL (exp);
+
+ case OFFSET_REF:
+ return expand_expr (resolve_offset_ref (exp), target, tmode, modifier);
+
+ case CALL_EXPR:
+ /* Check for a built-in function. */
+ if (TREE_CODE (TREE_OPERAND (exp, 0)) == ADDR_EXPR
+ && TREE_CODE (TREE_OPERAND (TREE_OPERAND (exp, 0), 0)) == FUNCTION_DECL
+ && (DECL_FUNCTION_CODE (TREE_OPERAND (TREE_OPERAND (exp, 0), 0))
+ != NOT_BUILT_IN))
+ return expand_builtin (exp, target, subtarget, tmode, ignore);
+ /* If this call was expanded already by preexpand_calls,
+ just return the result we got. */
+ if (CALL_EXPR_RTL (exp) != 0)
+ return CALL_EXPR_RTL (exp);
+ return expand_call (exp,
+ (modifier == EXPAND_INTO_STACK) ? original_target : target,
+ ignore, modifier);
+
+ case NOP_EXPR:
+ case CONVERT_EXPR:
+ case REFERENCE_EXPR:
+ if (TREE_CODE (type) == VOID_TYPE || ignore)
+ {
+ expand_expr (TREE_OPERAND (exp, 0), const0_rtx, VOIDmode, modifier);
+ return const0_rtx;
+ }
+ if (mode == TYPE_MODE (TREE_TYPE (TREE_OPERAND (exp, 0))))
+ return expand_expr (TREE_OPERAND (exp, 0), target, VOIDmode, modifier);
+ op0 = expand_expr (TREE_OPERAND (exp, 0), 0, mode, 0);
+ if (GET_MODE (op0) == mode || GET_MODE (op0) == VOIDmode)
+ return op0;
+ if (flag_force_mem && GET_CODE (op0) == MEM)
+ op0 = copy_to_reg (op0);
+ if (GET_MODE (op0) == VOIDmode)
+ /* Avoid problem in convert_move due to unknown mode of OP0. */
+ op0 = copy_to_mode_reg (TYPE_MODE (TREE_TYPE (TREE_OPERAND (exp, 0))),
+ op0);
+ if (target == 0)
+ target = gen_reg_rtx (mode);
+ convert_move (target, op0, TREE_UNSIGNED (TREE_TYPE (TREE_OPERAND (exp, 0))));
+ return target;
+
+ case PLUS_EXPR:
+ preexpand_calls (exp);
+ if (TREE_CODE (TREE_OPERAND (exp, 0)) == INTEGER_CST
+ && modifier == EXPAND_SUM)
+ {
+ op1 = expand_expr (TREE_OPERAND (exp, 1), subtarget, VOIDmode, EXPAND_SUM);
+ op1 = plus_constant (op1, TREE_INT_CST_LOW (TREE_OPERAND (exp, 0)));
+ return op1;
+ }
+ negate_1 = 1;
+ plus_minus:
+ if (TREE_CODE (TREE_OPERAND (exp, 1)) == INTEGER_CST
+ && modifier == EXPAND_SUM)
+ {
+ op0 = expand_expr (TREE_OPERAND (exp, 0), subtarget, VOIDmode, EXPAND_SUM);
+ op0 = plus_constant (op0,
+ negate_1 * TREE_INT_CST_LOW (TREE_OPERAND (exp, 1)));
+ return op0;
+ }
+ this_optab = add_optab;
+ if (modifier != EXPAND_SUM) goto binop;
+ subtarget = validate_subtarget (subtarget, TREE_OPERAND (exp, 1));
+ op0 = expand_expr (TREE_OPERAND (exp, 0), subtarget, VOIDmode, EXPAND_SUM);
+ op1 = expand_expr (TREE_OPERAND (exp, 1), 0, VOIDmode, EXPAND_SUM);
+ /* Put a sum last, to simplify what follows. */
+#ifdef OLD_INDEXING
+ if (GET_CODE (op1) == MULT)
+ {
+ temp = op0;
+ op0 = op1;
+ op1 = temp;
+ }
+#endif
+#ifndef OLD_INDEXING
+ /* Make sure any term that's a sum with a constant comes last. */
+ if (GET_CODE (op0) == PLUS
+ && CONSTANT_P (XEXP (op0, 1)))
+ {
+ temp = op0;
+ op0 = op1;
+ op1 = temp;
+ }
+ /* If adding to a sum including a constant,
+ associate it to put the constant outside. */
+ if (GET_CODE (op1) == PLUS
+ && CONSTANT_P (XEXP (op1, 1)))
+ {
+ rtx tem;
+ int constant_term = 0;
+
+ op0 = gen_rtx (PLUS, mode, XEXP (op1, 0), op0);
+ /* Let's also eliminate constants from op0 if possible. */
+ tem = eliminate_constant_term (op0, &constant_term);
+ if (GET_CODE (XEXP (op1, 1)) == CONST_INT)
+ {
+ if (constant_term != 0)
+ return plus_constant (tem, INTVAL (XEXP (op1, 1)) + constant_term);
+ else
+ return plus_constant (op0, INTVAL (XEXP (op1, 1)));
+ }
+ else
+ return gen_rtx (PLUS, mode, op0, XEXP (op1, 1));
+ }
+#endif
+ return gen_rtx (PLUS, mode, op0, op1);
+
+ case MINUS_EXPR:
+ preexpand_calls (exp);
+ if (TREE_CODE (TREE_OPERAND (exp, 1)) == INTEGER_CST
+ && GET_MODE_BITSIZE (TYPE_MODE (type)) <= HOST_BITS_PER_INT)
+ {
+ int negated;
+ if (modifier == EXPAND_SUM)
+ {
+ negate_1 = -1;
+ goto plus_minus;
+ }
+ subtarget = validate_subtarget (subtarget, TREE_OPERAND (exp, 1));
+ op0 = expand_expr (TREE_OPERAND (exp, 0), subtarget, VOIDmode, 0);
+ negated = - TREE_INT_CST_LOW (TREE_OPERAND (exp, 1));
+ if (GET_MODE_BITSIZE (mode) < HOST_BITS_PER_INT)
+ negated &= (1 << GET_MODE_BITSIZE (mode)) - 1;
+ op1 = gen_rtx (CONST_INT, VOIDmode, negated);
+ this_optab = add_optab;
+ goto binop2;
+ }
+ this_optab = sub_optab;
+ goto binop;
+
+ case MULT_EXPR:
+ preexpand_calls (exp);
+ /* If first operand is constant, swap them.
+ Thus the following special case checks need only
+ check the second operand. */
+ if (TREE_CODE (TREE_OPERAND (exp, 0)) == INTEGER_CST)
+ {
+ register tree t1 = TREE_OPERAND (exp, 0);
+ TREE_OPERAND (exp, 0) = TREE_OPERAND (exp, 1);
+ TREE_OPERAND (exp, 1) = t1;
+ }
+
+ /* Attempt to return something suitable for generating an
+ indexed address, for machines that support that. */
+
+ if (modifier == EXPAND_SUM
+ && TREE_CODE (TREE_OPERAND (exp, 1)) == INTEGER_CST)
+ {
+ op0 = expand_expr (TREE_OPERAND (exp, 0), subtarget, VOIDmode, EXPAND_SUM);
+
+ /* Apply distributive law if OP0 is x+c. */
+ if (GET_CODE (op0) == PLUS
+ && GET_CODE (XEXP (op0, 1)) == CONST_INT)
+ return gen_rtx (PLUS, mode,
+ gen_rtx (MULT, mode, XEXP (op0, 0),
+ gen_rtx (CONST_INT, VOIDmode,
+ TREE_INT_CST_LOW (TREE_OPERAND (exp, 1)))),
+ gen_rtx (CONST_INT, VOIDmode,
+ (TREE_INT_CST_LOW (TREE_OPERAND (exp, 1))
+ * INTVAL (XEXP (op0, 1)))));
+
+ if (GET_CODE (op0) != REG)
+ op0 = force_operand (op0, 0);
+ if (GET_CODE (op0) != REG)
+ op0 = copy_to_mode_reg (mode, op0);
+
+ return gen_rtx (MULT, mode, op0,
+ gen_rtx (CONST_INT, VOIDmode,
+ TREE_INT_CST_LOW (TREE_OPERAND (exp, 1))));
+ }
+ subtarget = validate_subtarget (subtarget, TREE_OPERAND (exp, 1));
+ /* Check for multiplying things that have been extended
+ from a narrower type. If this machine supports multiplying
+ in that narrower type with a result in the desired type,
+ do it that way, and avoid the explicit type-conversion. */
+ if (TREE_CODE (TREE_OPERAND (exp, 0)) == NOP_EXPR
+ && TREE_CODE (TREE_TYPE (exp)) == INTEGER_TYPE
+ && (TYPE_PRECISION (TREE_TYPE (TREE_OPERAND (TREE_OPERAND (exp, 0), 0)))
+ < TYPE_PRECISION (TREE_TYPE (TREE_OPERAND (exp, 0))))
+ && ((TREE_CODE (TREE_OPERAND (exp, 1)) == INTEGER_CST
+ && int_fits_type_p (TREE_OPERAND (exp, 1),
+ TREE_TYPE (TREE_OPERAND (TREE_OPERAND (exp, 0), 0)))
+ /* Don't use a widening multiply if a shift will do. */
+ && exact_log2 (TREE_INT_CST_LOW (TREE_OPERAND (exp, 1))) < 0)
+ ||
+ (TREE_CODE (TREE_OPERAND (exp, 1)) == NOP_EXPR
+ && (TYPE_PRECISION (TREE_TYPE (TREE_OPERAND (TREE_OPERAND (exp, 1), 0)))
+ ==
+ TYPE_PRECISION (TREE_TYPE (TREE_OPERAND (TREE_OPERAND (exp, 0), 0))))
+ /* If both operands are extended, they must either both
+ be zero-extended or both be sign-extended. */
+ && (TREE_UNSIGNED (TREE_TYPE (TREE_OPERAND (TREE_OPERAND (exp, 1), 0)))
+ ==
+ TREE_UNSIGNED (TREE_TYPE (TREE_OPERAND (TREE_OPERAND (exp, 0), 0)))))))
+ {
+ enum machine_mode innermode
+ = TYPE_MODE (TREE_TYPE (TREE_OPERAND (TREE_OPERAND (exp, 0), 0)));
+ this_optab = (TREE_UNSIGNED (TREE_TYPE (TREE_OPERAND (TREE_OPERAND (exp, 0), 0)))
+ ? umul_widen_optab : smul_widen_optab);
+ if (mode == GET_MODE_WIDER_MODE (innermode)
+ && this_optab->handlers[(int) mode].insn_code != CODE_FOR_nothing)
+ {
+ op0 = expand_expr (TREE_OPERAND (TREE_OPERAND (exp, 0), 0),
+ 0, VOIDmode, 0);
+ if (TREE_CODE (TREE_OPERAND (exp, 1)) == INTEGER_CST)
+ op1 = expand_expr (TREE_OPERAND (exp, 1), 0, VOIDmode, 0);
+ else
+ op1 = expand_expr (TREE_OPERAND (TREE_OPERAND (exp, 1), 0),
+ 0, VOIDmode, 0);
+ goto binop2;
+ }
+ }
+ op0 = expand_expr (TREE_OPERAND (exp, 0), subtarget, VOIDmode, 0);
+ op1 = expand_expr (TREE_OPERAND (exp, 1), 0, VOIDmode, 0);
+ return expand_mult (mode, op0, op1, target, TREE_UNSIGNED (type));
+
+ case TRUNC_DIV_EXPR:
+ case FLOOR_DIV_EXPR:
+ case CEIL_DIV_EXPR:
+ case ROUND_DIV_EXPR:
+ case EXACT_DIV_EXPR:
+ preexpand_calls (exp);
+ subtarget = validate_subtarget (subtarget, TREE_OPERAND (exp, 1));
+ /* Possible optimization: compute the dividend with EXPAND_SUM
+ then if the divisor is constant can optimize the case
+ where some terms of the dividend have coeffs divisible by it. */
+ op0 = expand_expr (TREE_OPERAND (exp, 0), subtarget, VOIDmode, 0);
+ op1 = expand_expr (TREE_OPERAND (exp, 1), 0, VOIDmode, 0);
+ return expand_divmod (0, code, mode, op0, op1, target,
+ TREE_UNSIGNED (type));
+
+ case RDIV_EXPR:
+ preexpand_calls (exp);
+ this_optab = flodiv_optab;
+ goto binop;
+
+ case TRUNC_MOD_EXPR:
+ case FLOOR_MOD_EXPR:
+ case CEIL_MOD_EXPR:
+ case ROUND_MOD_EXPR:
+ preexpand_calls (exp);
+ subtarget = validate_subtarget (subtarget, TREE_OPERAND (exp, 1));
+ op0 = expand_expr (TREE_OPERAND (exp, 0), subtarget, VOIDmode, 0);
+ op1 = expand_expr (TREE_OPERAND (exp, 1), 0, VOIDmode, 0);
+ return expand_divmod (1, code, mode, op0, op1, target,
+ TREE_UNSIGNED (type));
+#if 0
+#ifdef HAVE_divmoddisi4
+ if (GET_MODE (op0) != DImode)
+ {
+ temp = gen_reg_rtx (DImode);
+ convert_move (temp, op0, 0);
+ op0 = temp;
+ if (GET_MODE (op1) != SImode && GET_CODE (op1) != CONST_INT)
+ {
+ temp = gen_reg_rtx (SImode);
+ convert_move (temp, op1, 0);
+ op1 = temp;
+ }
+ temp = gen_reg_rtx (SImode);
+ if (target == 0)
+ target = gen_reg_rtx (SImode);
+ emit_insn (gen_divmoddisi4 (temp, protect_from_queue (op0, 0),
+ protect_from_queue (op1, 0),
+ protect_from_queue (target, 1)));
+ return target;
+ }
+#endif
+#endif
+
+ case FIX_ROUND_EXPR:
+ case FIX_FLOOR_EXPR:
+ case FIX_CEIL_EXPR:
+ abort (); /* Not used for C. */
+
+ case FIX_TRUNC_EXPR:
+ op0 = expand_expr (TREE_OPERAND (exp, 0), 0, VOIDmode, 0);
+ if (target == 0)
+ target = gen_reg_rtx (mode);
+ {
+ int unsignedp = TREE_UNSIGNED (TREE_TYPE (exp));
+ if (mode == HImode || mode == QImode)
+ {
+ register rtx temp = gen_reg_rtx (SImode);
+ expand_fix (temp, op0, 0);
+ convert_move (target, temp, 0);
+ }
+ else
+ expand_fix (target, op0, unsignedp);
+ }
+ return target;
+
+ case FLOAT_EXPR:
+ op0 = expand_expr (TREE_OPERAND (exp, 0), 0, VOIDmode, 0);
+ if (target == 0)
+ target = gen_reg_rtx (mode);
+ if (GET_MODE (op0) == VOIDmode)
+ /* Avoid problem in convert_move due to unknown mode of OP0. */
+ op0 = copy_to_mode_reg (TYPE_MODE (TREE_TYPE (TREE_OPERAND (exp, 0))),
+ op0);
+ {
+ int unsignedp = TREE_UNSIGNED (TREE_TYPE (TREE_OPERAND (exp, 0)));
+ if (GET_MODE (op0) == HImode
+ || GET_MODE (op0) == QImode)
+ {
+ register rtx temp = gen_reg_rtx (SImode);
+ convert_move (temp, op0, unsignedp);
+ expand_float (target, temp, 0);
+ }
+ else
+ expand_float (target, op0, unsignedp);
+ }
+ return target;
+
+ case NEGATE_EXPR:
+ op0 = expand_expr (TREE_OPERAND (exp, 0), target, VOIDmode, 0);
+ temp = expand_unop (mode, neg_optab, op0, target, 0);
+ if (temp == 0)
+ abort ();
+ return temp;
+
+ case ABS_EXPR:
+ /* First try to do it with a special abs instruction.
+ If that does not win, use conditional jump and negate. */
+ op0 = expand_expr (TREE_OPERAND (exp, 0), subtarget, VOIDmode, 0);
+ temp = expand_unop (mode, abs_optab, op0, target, 0);
+ if (temp != 0)
+ return temp;
+ temp = gen_label_rtx ();
+ if (target == 0 || GET_CODE (target) != REG)
+ target = gen_reg_rtx (mode);
+ emit_move_insn (target, op0);
+ emit_cmp_insn (target,
+ expand_expr (convert (TREE_TYPE (exp), integer_zero_node),
+ 0, VOIDmode, 0),
+ 0, 0, 0);
+ NO_DEFER_POP;
+ emit_jump_insn (gen_bge (temp));
+ op0 = expand_unop (mode, neg_optab, target, target, 0);
+ if (op0 != target)
+ emit_move_insn (target, op0);
+ emit_label (temp);
+ OK_DEFER_POP;
+ return target;
+
+ case MAX_EXPR:
+ case MIN_EXPR:
+ mode = TYPE_MODE (TREE_TYPE (TREE_OPERAND (exp, 1)));
+ op1 = expand_expr (TREE_OPERAND (exp, 1), 0, VOIDmode, 0);
+ if (target == 0 || GET_CODE (target) != REG || target == op1)
+ target = gen_reg_rtx (mode);
+ op0 = expand_expr (TREE_OPERAND (exp, 0), target, VOIDmode, 0);
+ if (target != op0)
+ emit_move_insn (target, op0);
+ op0 = gen_label_rtx ();
+ if (code == MAX_EXPR)
+ temp = (TREE_UNSIGNED (TREE_TYPE (TREE_OPERAND (exp, 1)))
+ ? compare1 (target, op1, GEU, LEU, 1, mode)
+ : compare1 (target, op1, GE, LE, 0, mode));
+ else
+ temp = (TREE_UNSIGNED (TREE_TYPE (TREE_OPERAND (exp, 1)))
+ ? compare1 (target, op1, LEU, GEU, 1, mode)
+ : compare1 (target, op1, LE, GE, 0, mode));
+ if (temp == const0_rtx)
+ emit_move_insn (target, op1);
+ else if (temp != const1_rtx)
+ {
+ if (bcc_gen_fctn[(int) GET_CODE (temp)] != 0)
+ emit_jump_insn ((*bcc_gen_fctn[(int) GET_CODE (temp)]) (op0));
+ else
+ abort ();
+ emit_move_insn (target, op1);
+ }
+ emit_label (op0);
+ return target;
+
+/* ??? Can optimize when the operand of this is a bitwise operation,
+ by using a different bitwise operation. */
+ case BIT_NOT_EXPR:
+ op0 = expand_expr (TREE_OPERAND (exp, 0), subtarget, VOIDmode, 0);
+ temp = expand_unop (mode, one_cmpl_optab, op0, target, 1);
+ if (temp == 0)
+ abort ();
+ return temp;
+
+ case FFS_EXPR:
+ op0 = expand_expr (TREE_OPERAND (exp, 0), subtarget, VOIDmode, 0);
+ temp = expand_unop (mode, ffs_optab, op0, target, 1);
+ if (temp == 0)
+ abort ();
+ return temp;
+
+/* ??? Can optimize bitwise operations with one arg constant.
+ Pastel optimizes (a bitwise1 n) bitwise2 (a bitwise3 b)
+ and (a bitwise1 b) bitwise2 b (etc)
+ but that is probably not worth while. */
+
+/* BIT_AND_EXPR is for bitwise anding.
+ TRUTH_AND_EXPR is for anding two boolean values
+ when we want in all cases to compute both of them.
+ In general it is fastest to do TRUTH_AND_EXPR by
+ computing both operands as actual zero-or-1 values
+ and then bitwise anding. In cases where there cannot
+ be any side effects, better code would be made by
+ treating TRUTH_AND_EXPR like TRUTH_ANDIF_EXPR;
+ but the question is how to recognize those cases. */
+
+ case TRUTH_AND_EXPR:
+ case BIT_AND_EXPR:
+ preexpand_calls (exp);
+ subtarget = validate_subtarget (subtarget, TREE_OPERAND (exp, 1));
+ op0 = expand_expr (TREE_OPERAND (exp, 0), subtarget, VOIDmode, 0);
+ op1 = expand_expr (TREE_OPERAND (exp, 1), 0, VOIDmode, 0);
+ return expand_bit_and (mode, op0, op1, target);
+
+/* See comment above about TRUTH_AND_EXPR; it applies here too. */
+ case TRUTH_OR_EXPR:
+ case BIT_IOR_EXPR:
+ preexpand_calls (exp);
+ this_optab = ior_optab;
+ goto binop;
+
+ case BIT_XOR_EXPR:
+ preexpand_calls (exp);
+ this_optab = xor_optab;
+ goto binop;
+
+ case LSHIFT_EXPR:
+ case RSHIFT_EXPR:
+ case LROTATE_EXPR:
+ case RROTATE_EXPR:
+ preexpand_calls (exp);
+ subtarget = validate_subtarget (subtarget, TREE_OPERAND (exp, 1));
+ op0 = expand_expr (TREE_OPERAND (exp, 0), subtarget, VOIDmode, 0);
+ return expand_shift (code, mode, op0, TREE_OPERAND (exp, 1), target,
+ TREE_UNSIGNED (type));
+
+/* ??? cv's were used to effect here to combine additive constants
+ and to determine the answer when only additive constants differ.
+ Also, the addition of one can be handled by changing the condition. */
+ case LT_EXPR:
+ case LE_EXPR:
+ case GT_EXPR:
+ case GE_EXPR:
+ case EQ_EXPR:
+ case NE_EXPR:
+ preexpand_calls (exp);
+ temp = do_store_flag (exp, target, mode);
+ if (temp != 0)
+ return temp;
+ /* For foo != 0, load foo, and if it is nonzero load 1 instead. */
+ if (code == NE_EXPR && integer_zerop (TREE_OPERAND (exp, 1))
+ && subtarget
+ && (GET_MODE (subtarget)
+ == TYPE_MODE (TREE_TYPE (TREE_OPERAND (exp, 0)))))
+ {
+ temp = expand_expr (TREE_OPERAND (exp, 0), subtarget, VOIDmode, 0);
+ if (temp != subtarget)
+ temp = copy_to_reg (temp);
+ op1 = gen_label_rtx ();
+ emit_cmp_insn (temp, const0_rtx, 0, TREE_UNSIGNED (type), 0);
+ emit_jump_insn (gen_beq (op1));
+ emit_move_insn (temp, const1_rtx);
+ emit_label (op1);
+ return temp;
+ }
+ /* If no set-flag instruction, must generate a conditional
+ store into a temporary variable. Drop through
+ and handle this like && and ||. */
+
+ case TRUTH_ANDIF_EXPR:
+ case TRUTH_ORIF_EXPR:
+ temp = gen_reg_rtx (mode);
+ emit_clr_insn (temp);
+ op1 = gen_label_rtx ();
+ jumpifnot (exp, op1);
+ emit_0_to_1_insn (temp);
+ emit_label (op1);
+ return temp;
+
+ case TRUTH_NOT_EXPR:
+ op0 = expand_expr (TREE_OPERAND (exp, 0), target, VOIDmode, 0);
+ /* The parser is careful to generate TRUTH_NOT_EXPR
+ only with operands that are always zero or one. */
+ temp = expand_binop (mode, xor_optab, op0,
+ gen_rtx (CONST_INT, mode, 1),
+ target, 1, OPTAB_LIB_WIDEN);
+ if (temp == 0)
+ abort ();
+ return temp;
+
+ case COMPOUND_EXPR:
+ expand_expr (TREE_OPERAND (exp, 0), const0_rtx, VOIDmode, 0);
+ emit_queue ();
+ return expand_expr (TREE_OPERAND (exp, 1), target, VOIDmode, 0);
+
+ case COND_EXPR:
+ {
+ /* Note that COND_EXPRs whose type is a structure or union
+ are required to be constructed to contain assignments of
+ a temporary variable, so that we can evaluate them here
+ for side effect only. If type is void, we must do likewise. */
+
+ /* If an arm of the branch requires a cleanup, that
+ only that cleanup is performed. */
+
+ tree old_cleanups = cleanups_this_call;
+ cleanups_this_call = 0;
+
+ op0 = gen_label_rtx ();
+ op1 = gen_label_rtx ();
+
+ if (mode == VOIDmode || ignore)
+ temp = 0;
+ else if (target)
+ temp = target;
+ else if (mode == BLKmode)
+ {
+ if (TYPE_SIZE (type) == 0 || ! TREE_LITERAL (TYPE_SIZE (type)))
+ abort ();
+ temp = assign_stack_local (BLKmode,
+ (TREE_INT_CST_LOW (TYPE_SIZE (type))
+ * TYPE_SIZE_UNIT (type)
+ + BITS_PER_UNIT - 1)
+ / BITS_PER_UNIT);
+ }
+ else
+ temp = gen_reg_rtx (mode);
+
+ jumpifnot (TREE_OPERAND (exp, 0), op0);
+ NO_DEFER_POP;
+ if (temp != 0)
+ store_expr (TREE_OPERAND (exp, 1), temp, 0);
+ else
+ expand_expr (TREE_OPERAND (exp, 1), ignore ? const0_rtx : 0,
+ VOIDmode, 0);
+ if (cleanups_this_call)
+ {
+ sorry ("aggreage value in COND_EXPR");
+ cleanups_this_call = 0;
+ }
+
+ emit_queue ();
+ emit_jump_insn (gen_jump (op1));
+ emit_barrier ();
+ emit_label (op0);
+ if (temp != 0)
+ store_expr (TREE_OPERAND (exp, 2), temp, 0);
+ else
+ expand_expr (TREE_OPERAND (exp, 2), ignore ? const0_rtx : 0,
+ VOIDmode, 0);
+ if (cleanups_this_call)
+ {
+ sorry ("aggreage value in COND_EXPR");
+ cleanups_this_call = 0;
+ }
+
+ emit_queue ();
+ emit_label (op1);
+ OK_DEFER_POP;
+ cleanups_this_call = old_cleanups;
+ return temp;
+ }
+
+ case NEW_EXPR:
+ {
+ /* Something needs to be initialized, but we didn't know
+ where that thing was when building the tree. For example,
+ it could be the return value of a function, or a parameter
+ to a function which lays down in the stack, or a temporary
+ variable which must be passed by reference. */
+
+ tree slot = TREE_OPERAND (exp, 0);
+
+ if (TREE_CODE (slot) != VAR_DECL)
+ abort ();
+
+ if (target == 0)
+ {
+ target = assign_stack_local (TYPE_MODE (type),
+ int_size_in_bytes (type));
+
+ DECL_RTL (slot) = target;
+
+ /* Since SLOT is not known to the called function
+ to belong to its stack frame, we must build an explicit
+ cleanup. This case occurs when we must build up a reference
+ to pass the reference as an argument. In this case,
+ it is very likely that such a reference need not be
+ built here. */
+
+ if (TREE_OPERAND (exp, 2) == 0)
+ TREE_OPERAND (exp, 2) = (tree)maybe_build_cleanup (slot);
+ if (TREE_OPERAND (exp, 2))
+ cleanups_this_call = tree_cons (0, TREE_OPERAND (exp, 2),
+ cleanups_this_call);
+ }
+ else
+ {
+ /* This case does occur, when expanding a parameter which
+ needs to be constructed on the stack. The target
+ is the actual stack address that we want to initialize.
+
+ The function we call will perform the cleanup in this case. */
+ DECL_RTL (slot) = target;
+ }
+
+ /* Run the initialization expression now with the target. */
+ return expand_expr (TREE_OPERAND (exp, 1), target, tmode, modifier);
+ }
+
+ case INIT_EXPR:
+ {
+ tree lhs = TREE_OPERAND (exp, 0);
+ tree rhs = TREE_OPERAND (exp, 1);
+ tree noncopied_parts = 0;
+ tree type = TREE_TYPE (lhs);
+
+ temp = expand_assignment (lhs, rhs, ! ignore, original_target != 0);
+ if (TYPE_NONCOPIED_PARTS (type) != 0 && !fixed_type_p (rhs))
+ noncopied_parts = init_noncopied_parts (stabilize_reference (lhs),
+ TYPE_NONCOPIED_PARTS (type));
+ while (noncopied_parts != 0)
+ {
+ expand_assignment (TREE_VALUE (noncopied_parts),
+ TREE_PURPOSE (noncopied_parts), 0, 0);
+ noncopied_parts = TREE_CHAIN (noncopied_parts);
+ }
+ return temp;
+ }
+
+ case MODIFY_EXPR:
+ {
+ /* If lhs is complex, expand calls in rhs before computing it.
+ That's so we don't compute a pointer and save it over a call.
+ If lhs is simple, compute it first so we can give it as a
+ target if the rhs is just a call. This avoids an extra temp and copy
+ and that prevents a partial-subsumption which makes bad code.
+ Actually we could treat component_ref's of vars like vars. */
+ tree lhs = TREE_OPERAND (exp, 0);
+ tree rhs = TREE_OPERAND (exp, 1);
+ tree noncopied_parts = 0;
+ tree type = TREE_TYPE (lhs);
+ temp = 0;
+
+ if (TREE_CODE (lhs) != VAR_DECL
+ && TREE_CODE (lhs) != RESULT_DECL
+ && TREE_CODE (lhs) != PARM_DECL)
+ preexpand_calls (exp);
+
+ /* Check for |= or &= of a bitfield of size one into another bitfield
+ of size 1. In this case, (unless we need the result of the
+ assignment) we can do this more efficiently with a
+ test followed by an assignment, if necessary. */
+ if (ignore
+ && TREE_CODE (lhs) == COMPONENT_REF
+ && (TREE_CODE (rhs) == BIT_IOR_EXPR
+ || TREE_CODE (rhs) == BIT_AND_EXPR)
+ && TREE_OPERAND (rhs, 0) == lhs
+ && TREE_CODE (TREE_OPERAND (rhs, 1)) == COMPONENT_REF
+ && (TREE_INT_CST_LOW (DECL_SIZE (TREE_OPERAND (lhs, 1)))
+ * DECL_SIZE_UNIT (TREE_OPERAND (lhs, 1))) == 1
+ && (TREE_INT_CST_LOW (DECL_SIZE (TREE_OPERAND (TREE_OPERAND (rhs, 1), 1)))
+ * DECL_SIZE_UNIT (TREE_OPERAND (TREE_OPERAND (rhs, 1), 1))) == 1)
+ {
+ rtx label = gen_label_rtx ();
+
+ do_jump (TREE_OPERAND (rhs, 1),
+ TREE_CODE (rhs) == BIT_IOR_EXPR ? label : 0,
+ TREE_CODE (rhs) == BIT_AND_EXPR ? label : 0);
+ expand_assignment (lhs, convert (TREE_TYPE (rhs),
+ (TREE_CODE (rhs) == BIT_IOR_EXPR
+ ? integer_one_node
+ : integer_zero_node)),
+ 0, 0);
+ emit_label (label);
+ return const0_rtx;
+ }
+
+ if (TYPE_NONCOPIED_PARTS (type) != 0
+ && ! (fixed_type_p (lhs) && fixed_type_p (rhs)))
+ noncopied_parts = save_noncopied_parts (stabilize_reference (lhs),
+ TYPE_NONCOPIED_PARTS (type));
+
+ temp = expand_assignment (lhs, rhs, ! ignore, original_target != 0);
+ while (noncopied_parts != 0)
+ {
+ expand_assignment (TREE_PURPOSE (noncopied_parts),
+ TREE_VALUE (noncopied_parts), 0, 0);
+ noncopied_parts = TREE_CHAIN (noncopied_parts);
+ }
+ return temp;
+ }
+
+ case PREINCREMENT_EXPR:
+ case PREDECREMENT_EXPR:
+ return expand_increment (exp, 0);
+
+ case POSTINCREMENT_EXPR:
+ case POSTDECREMENT_EXPR:
+ return expand_increment (exp, !ignore);
+
+ case ADDR_EXPR:
+ op0 = expand_expr (TREE_OPERAND (exp, 0), 0, VOIDmode,
+ modifier != EXPAND_INTO_STACK ? EXPAND_CONST_ADDRESS : EXPAND_INTO_STACK);
+ if (GET_CODE (op0) != MEM)
+ abort ();
+ if (modifier == EXPAND_SUM)
+ return XEXP (op0, 0);
+ op0 = force_operand (XEXP (op0, 0), target);
+ if (flag_force_addr && GET_CODE (op0) != REG)
+ return force_reg (Pmode, op0);
+ return op0;
+
+ case ENTRY_VALUE_EXPR:
+ abort ();
+
+ case ERROR_MARK:
+ return const0_rtx;
+
+ default:
+ return (*lang_expand_expr) (exp, target, tmode, modifier);
+ }
+
+ /* Here to do an ordinary binary operator, generating an instruction
+ from the optab already placed in `this_optab'. */
+ binop:
+ /* Detect things like x = y | (a == b)
+ and do them as (x = y), (a == b ? x |= 1 : 0), x. */
+ /* First, get the comparison or conditional into the second arg. */
+ if (comparison_code[(int) TREE_CODE (TREE_OPERAND (exp, 0))]
+ || (TREE_CODE (TREE_OPERAND (exp, 0)) == COND_EXPR
+ && (integer_zerop (TREE_OPERAND (TREE_OPERAND (exp, 0), 1))
+ || integer_zerop (TREE_OPERAND (TREE_OPERAND (exp, 0), 2)))))
+ {
+ if (this_optab == ior_optab || this_optab == add_optab
+ || this_optab == xor_optab)
+ {
+ tree exch = TREE_OPERAND (exp, 1);
+ TREE_OPERAND (exp, 1) = TREE_OPERAND (exp, 0);
+ TREE_OPERAND (exp, 0) = exch;
+ }
+ }
+ /* Optimize X + (Y ? Z : 0) by computing X and maybe adding Z. */
+ if (comparison_code[(int) TREE_CODE (TREE_OPERAND (exp, 1))]
+ || (TREE_CODE (TREE_OPERAND (exp, 1)) == COND_EXPR
+ && (integer_zerop (TREE_OPERAND (TREE_OPERAND (exp, 1), 1))
+ || integer_zerop (TREE_OPERAND (TREE_OPERAND (exp, 1), 2)))))
+ {
+ if (this_optab == ior_optab || this_optab == add_optab
+ || this_optab == xor_optab || this_optab == sub_optab
+ || this_optab == lshl_optab || this_optab == ashl_optab
+ || this_optab == lshr_optab || this_optab == ashr_optab
+ || this_optab == rotl_optab || this_optab == rotr_optab)
+ {
+ tree thenexp;
+ rtx thenv = 0;
+
+ /* TARGET gets a reg in which we can perform the computation.
+ Use the specified target if it's a pseudo reg and safe. */
+ target = validate_subtarget (subtarget, TREE_OPERAND (exp, 1));
+ if (target == 0) target = gen_reg_rtx (mode);
+
+ /* Compute X into the target. */
+ store_expr (TREE_OPERAND (exp, 0), target, 0);
+ op0 = gen_label_rtx ();
+
+ /* If other operand is a comparison COMP, treat it as COMP ? 1 : 0 */
+ if (TREE_CODE (TREE_OPERAND (exp, 1)) != COND_EXPR)
+ {
+ do_jump (TREE_OPERAND (exp, 1), op0, 0);
+ thenv = const1_rtx;
+ }
+ else if (integer_zerop (TREE_OPERAND (TREE_OPERAND (exp, 1), 2)))
+ {
+ do_jump (TREE_OPERAND (TREE_OPERAND (exp, 1), 0), op0, 0);
+ thenexp = TREE_OPERAND (TREE_OPERAND (exp, 1), 1);
+ }
+ else
+ {
+ do_jump (TREE_OPERAND (TREE_OPERAND (exp, 1), 0), 0, op0);
+ thenexp = TREE_OPERAND (TREE_OPERAND (exp, 1), 2);
+ }
+
+ if (thenv == 0)
+ thenv = expand_expr (thenexp, 0, VOIDmode, 0);
+
+ /* THENV is now Z, the value to operate on, as an rtx.
+ We have already tested that Y isn't zero, so do the operation. */
+
+ if (this_optab == rotl_optab || this_optab == rotr_optab)
+ temp = expand_binop (mode, this_optab, target, thenv, target,
+ -1, OPTAB_LIB);
+ else if (this_optab == lshl_optab || this_optab == lshr_optab)
+ temp = expand_binop (mode, this_optab, target, thenv, target,
+ 1, OPTAB_LIB_WIDEN);
+ else
+ temp = expand_binop (mode, this_optab, target, thenv, target,
+ 0, OPTAB_LIB_WIDEN);
+ if (target != temp)
+ emit_move_insn (target, temp);
+
+ emit_queue ();
+ do_pending_stack_adjust ();
+ emit_label (op0);
+ return target;
+ }
+ }
+ subtarget = validate_subtarget (subtarget, TREE_OPERAND (exp, 1));
+ op0 = expand_expr (TREE_OPERAND (exp, 0), subtarget, VOIDmode, 0);
+ op1 = expand_expr (TREE_OPERAND (exp, 1), 0, VOIDmode, 0);
+ binop2:
+ temp = expand_binop (mode, this_optab, op0, op1, target,
+ TREE_UNSIGNED (TREE_TYPE (exp)), OPTAB_LIB_WIDEN);
+ if (temp == 0)
+ abort ();
+ return temp;
+}
+\f
+/* Expand an expression EXP that calls a built-in function,
+ with result going to TARGET if that's convenient
+ (and in mode MODE if that's convenient).
+ SUBTARGET may be used as the target for computing one of EXP's operands.
+ IGNORE is nonzero if the value is to be ignored. */
+
+static rtx
+expand_builtin (exp, target, subtarget, mode, ignore)
+ tree exp;
+ rtx target;
+ rtx subtarget;
+ enum machine_mode mode;
+ int ignore;
+{
+ tree fndecl = TREE_OPERAND (TREE_OPERAND (exp, 0), 0);
+ tree arglist = TREE_OPERAND (exp, 1);
+ rtx op0;
+
+ switch (DECL_FUNCTION_CODE (fndecl))
+ {
+ case BUILT_IN_ABS:
+ case BUILT_IN_LABS:
+ case BUILT_IN_FABS:
+ /* build_function_call changes these into ABS_EXPR. */
+ abort ();
+
+ case BUILT_IN_SAVEREGS:
+ {
+ /* When this function is called, it means that registers must be
+ saved on entry to this function. So we migrate the
+ call to the first insn of this function. */
+ rtx last = get_last_insn ();
+ rtx temp, saving_insns, last_saving_insn;
+
+ /* If there are parameters which must be saved from this function,
+ save them now. */
+ saving_insns = save_from_saveregs;
+ emit_insns (saving_insns);
+ if (saving_insns)
+ {
+ emit_note (0, -1);
+ last_saving_insn = get_last_insn ();
+ }
+
+ /* Now really call the function. `expand_call' does not call
+ expand_builtin, so there is no danger of infinite recursion here. */
+ temp = expand_call (exp, target, ignore);
+
+ if (saving_insns)
+ {
+ extern void use_variable ();
+ do
+ {
+ if (GET_CODE (saving_insns) == INSN)
+ note_stores (PATTERN (saving_insns), use_variable);
+ saving_insns = NEXT_INSN (saving_insns);
+ } while (saving_insns != last_saving_insn);
+ }
+ reorder_insns (NEXT_INSN (last), get_last_insn (), get_insns ());
+ return temp;
+ }
+
+ case BUILT_IN_CLASSIFY_TYPE:
+ if (arglist != 0)
+ {
+ tree type = TREE_TYPE (TREE_VALUE (arglist));
+ enum tree_code code = TREE_CODE (type);
+ if (code == VOID_TYPE)
+ return gen_rtx (CONST_INT, VOIDmode, void_type_class);
+ if (code == INTEGER_TYPE)
+ return gen_rtx (CONST_INT, VOIDmode, integer_type_class);
+ if (code == CHAR_TYPE)
+ return gen_rtx (CONST_INT, VOIDmode, char_type_class);
+ if (code == ENUMERAL_TYPE)
+ return gen_rtx (CONST_INT, VOIDmode, enumeral_type_class);
+ if (code == BOOLEAN_TYPE)
+ return gen_rtx (CONST_INT, VOIDmode, boolean_type_class);
+ if (code == POINTER_TYPE)
+ return gen_rtx (CONST_INT, VOIDmode, pointer_type_class);
+ if (code == REFERENCE_TYPE)
+ return gen_rtx (CONST_INT, VOIDmode, reference_type_class);
+ if (code == OFFSET_TYPE)
+ return gen_rtx (CONST_INT, VOIDmode, offset_type_class);
+ if (code == REAL_TYPE)
+ return gen_rtx (CONST_INT, VOIDmode, real_type_class);
+ if (code == COMPLEX_TYPE)
+ return gen_rtx (CONST_INT, VOIDmode, complex_type_class);
+ if (code == FUNCTION_TYPE)
+ return gen_rtx (CONST_INT, VOIDmode, function_type_class);
+ if (code == METHOD_TYPE)
+ return gen_rtx (CONST_INT, VOIDmode, method_type_class);
+ if (code == RECORD_TYPE)
+ return gen_rtx (CONST_INT, VOIDmode, record_type_class);
+ if (code == UNION_TYPE)
+ return gen_rtx (CONST_INT, VOIDmode, union_type_class);
+ if (code == ARRAY_TYPE)
+ return gen_rtx (CONST_INT, VOIDmode, array_type_class);
+ if (code == STRING_TYPE)
+ return gen_rtx (CONST_INT, VOIDmode, string_type_class);
+ if (code == SET_TYPE)
+ return gen_rtx (CONST_INT, VOIDmode, set_type_class);
+ if (code == FILE_TYPE)
+ return gen_rtx (CONST_INT, VOIDmode, file_type_class);
+ if (code == LANG_TYPE)
+ return gen_rtx (CONST_INT, VOIDmode, lang_type_class);
+ }
+ return gen_rtx (CONST_INT, VOIDmode, no_type_class);
+
+ case BUILT_IN_ALLOCA:
+ if (arglist == 0
+ /* Arg could be non-integer if user redeclared this fcn wrong. */
+ || TREE_CODE (TREE_TYPE (TREE_VALUE (arglist))) != INTEGER_TYPE)
+ return const0_rtx;
+ frame_pointer_needed = 1;
+ current_function_calls_alloca = 1;
+ /* Compute the argument. */
+ op0 = expand_expr (TREE_VALUE (arglist), 0, VOIDmode, 0);
+ if (! CONSTANT_P (op0))
+ {
+ op0 = force_reg (GET_MODE (op0), op0);
+ if (GET_MODE (op0) != Pmode)
+ op0 = convert_to_mode (Pmode, op0, 1);
+ }
+ /* Push that much space (rounding it up). */
+ do_pending_stack_adjust ();
+
+#ifdef STACK_POINTER_OFFSET
+ /* If we will have to round the result down (which is up
+ if stack grows down), make sure we have extra space so the
+ user still gets at least as much space as he asked for. */
+ if ((STACK_POINTER_OFFSET + STACK_BYTES - 1) / STACK_BYTES
+ != STACK_POINTER_OFFSET / STACK_BYTES)
+ op0 = plus_constant (op0, STACK_BYTES);
+#endif
+
+#ifdef STACK_GROWS_DOWNWARD
+ anti_adjust_stack (round_push (op0));
+#endif
+ /* Return a copy of current stack ptr, in TARGET if possible. */
+ if (target)
+ emit_move_insn (target, stack_pointer_rtx);
+ else
+ target = copy_to_reg (stack_pointer_rtx);
+#ifdef STACK_POINTER_OFFSET
+ /* If the contents of the stack pointer reg are offset from the
+ actual top-of-stack address, add the offset here. */
+ if (GET_CODE (target) == REG)
+ emit_insn (gen_add2_insn (target,
+ gen_rtx (CONST_INT, VOIDmode,
+ (STACK_POINTER_OFFSET + STACK_BYTES - 1) / STACK_BYTES * STACK_BYTES)));
+ else
+ {
+ rtx temp =
+ expand_binop (GET_MODE (target), add_optab, target,
+ gen_rtx (CONST_INT, VOIDmode,
+ (STACK_POINTER_OFFSET + STACK_BYTES - 1) / STACK_BYTES * STACK_BYTES),
+ target,
+ 1, OPTAB_DIRECT);
+ if (temp == 0) abort ();
+ if (temp != target)
+ emit_move_insn (target, temp);
+ }
+#endif
+#ifndef STACK_GROWS_DOWNWARD
+ anti_adjust_stack (round_push (op0));
+#endif
+ /* Some systems require a particular insn to refer to the stack
+ to make the pages exist. */
+#ifdef HAVE_probe
+ if (HAVE_probe)
+ emit_insn (gen_probe ());
+#endif
+ return target;
+
+ case BUILT_IN_FFS:
+ if (arglist == 0
+ /* Arg could be non-integer if user redeclared this fcn wrong. */
+ || TREE_CODE (TREE_TYPE (TREE_VALUE (arglist))) != INTEGER_TYPE)
+ return const0_rtx;
+
+ /* Compute the argument. */
+ op0 = expand_expr (TREE_VALUE (arglist), subtarget, VOIDmode, 0);
+ /* Compute ffs, into TARGET if possible.
+ Set TARGET to wherever the result comes back. */
+ target = expand_unop (mode, ffs_optab, op0, target, 1);
+ if (target == 0)
+ abort ();
+ return target;
+
+ default:
+ abort ();
+ }
+}
+\f
+/* Expand code for a post- or pre- increment or decrement
+ and return the RTX for the result.
+ POST is 1 for postinc/decrements and 0 for preinc/decrements. */
+
+static rtx
+expand_increment (exp, post)
+ register tree exp;
+ int post;
+{
+ register rtx op0, op1;
+ register rtx temp;
+ register tree incremented = TREE_OPERAND (exp, 0);
+ optab this_optab = add_optab;
+ int icode;
+ enum machine_mode mode = TYPE_MODE (TREE_TYPE (exp));
+ int op0_is_copy = 0;
+
+ /* Stabilize any component ref that might need to be
+ evaluated more than once below. */
+ if (TREE_CODE (incremented) == COMPONENT_REF
+ && (TREE_CODE (TREE_OPERAND (incremented, 0)) != INDIRECT_REF
+ || DECL_MODE (TREE_OPERAND (incremented, 1)) == BImode))
+ incremented = stabilize_reference (incremented);
+
+ /* Compute the operands as RTX.
+ Note whether OP0 is the actual lvalue or a copy of it:
+ I believe it is a copy iff it is a register and insns were
+ generated in computing it. */
+ temp = get_last_insn ();
+ op0 = expand_expr (incremented, 0, VOIDmode, 0);
+ if (temp != get_last_insn ())
+ op0_is_copy = (GET_CODE (op0) == REG || GET_CODE (op0) == SUBREG);
+ op1 = expand_expr (TREE_OPERAND (exp, 1), 0, VOIDmode, 0);
+
+ /* Decide whether incrementing or decrementing. */
+ if (TREE_CODE (exp) == POSTDECREMENT_EXPR
+ || TREE_CODE (exp) == PREDECREMENT_EXPR)
+ this_optab = sub_optab;
+
+ /* If OP0 is not the actual lvalue, but rather a copy in a register,
+ then we cannot just increment OP0. We must
+ therefore contrive to increment the original value.
+ Then we can return OP0 since it is a copy of the old value. */
+ if (op0_is_copy)
+ {
+ /* This is the easiest way to increment the value wherever it is.
+ Problems with multiple evaluation of INCREMENTED
+ are prevented because either (1) it is a component_ref,
+ in which case it was stabilized above, or (2) it is an array_ref
+ with constant index in an array in a register, which is
+ safe to reevaluate. */
+ tree newexp = build ((this_optab == add_optab
+ ? PLUS_EXPR : MINUS_EXPR),
+ TREE_TYPE (exp),
+ incremented,
+ TREE_OPERAND (exp, 1));
+ temp = expand_assignment (incremented, newexp, ! post, 0);
+ return post ? op0 : temp;
+ }
+
+ /* Convert decrement by a constant into a negative increment. */
+ if (this_optab == sub_optab
+ && GET_CODE (op1) == CONST_INT)
+ {
+ op1 = gen_rtx (CONST_INT, VOIDmode, - INTVAL (op1));
+ this_optab = add_optab;
+ }
+
+ if (post)
+ {
+ /* We have a true reference to the value in OP0.
+ If there is an insn to add or subtract in this mode, queue it. */
+
+ /* I'm not sure this is still necessary. */
+ op0 = stabilize (op0);
+
+ icode = (int) this_optab->handlers[(int) mode].insn_code;
+ if (icode != (int) CODE_FOR_nothing
+ /* Make sure that OP0 is valid for operands 0 and 1
+ of the insn we want to queue. */
+ && (*insn_operand_predicate[icode][0]) (op0, mode)
+ && (*insn_operand_predicate[icode][1]) (op0, mode))
+ {
+ if (! (*insn_operand_predicate[icode][2]) (op1, mode))
+ op1 = force_reg (mode, op1);
+
+ return enqueue_insn (op0, GEN_FCN (icode) (op0, op0, op1));
+ }
+ }
+
+ /* Preincrement, or we can't increment with one simple insn. */
+ if (post)
+ /* Save a copy of the value before inc or dec, to return it later. */
+ temp = copy_to_reg (op0);
+ else
+ /* Arrange to return the incremented value. */
+ /* Copy the rtx because expand_binop will protect from the queue,
+ and the results of that would be invalid for us to return
+ if our caller does emit_queue before using our result. */
+ temp = copy_rtx (op0);
+
+ /* Increment however we can. */
+ op1 = expand_binop (mode, this_optab, op0, op1, op0,
+ TREE_UNSIGNED (TREE_TYPE (exp)), OPTAB_LIB_WIDEN);
+ /* Make sure the value is stored into OP0. */
+ if (op1 != op0)
+ emit_move_insn (op0, op1);
+
+ return temp;
+}
+\f
+/* Expand all function calls contained within EXP, innermost ones first.
+ But don't look within expressions that have sequence points.
+ For each CALL_EXPR, record the rtx for its value
+ in the CALL_EXPR_RTL field.
+
+ Calls that return large structures for which a structure return
+ stack slot is needed are not preexpanded. Preexpanding them loses
+ because if more than one were preexpanded they would try to use the
+ same stack slot. */
+
+static void
+preexpand_calls (exp)
+ tree exp;
+{
+ register int nops, i;
+
+ if (! do_preexpand_calls)
+ return;
+
+ /* Only expressions and references can contain calls. */
+
+ if (tree_code_type[(int) TREE_CODE (exp)][0] != 'e'
+ && tree_code_type[(int) TREE_CODE (exp)][0] != 'r')
+ return;
+
+ switch (TREE_CODE (exp))
+ {
+ case CALL_EXPR:
+ /* Do nothing to built-in functions. */
+ if (TREE_CODE (TREE_OPERAND (exp, 0)) == ADDR_EXPR
+ && TREE_CODE (TREE_OPERAND (TREE_OPERAND (exp, 0), 0)) == FUNCTION_DECL
+ && (DECL_FUNCTION_CODE (TREE_OPERAND (TREE_OPERAND (exp, 0), 0))
+ != NOT_BUILT_IN))
+ return;
+ /* Precompute calls that don't return values in memory. */
+ if (CALL_EXPR_RTL (exp) == 0
+ && TYPE_MODE (TREE_TYPE (exp)) != BLKmode
+ && ! RETURN_IN_MEMORY (TREE_TYPE (exp)))
+ CALL_EXPR_RTL (exp) = expand_call (exp, 0, 0, 0);
+ return;
+
+ case COMPOUND_EXPR:
+ case COND_EXPR:
+ case TRUTH_ANDIF_EXPR:
+ case TRUTH_ORIF_EXPR:
+ /* If we find one of these, then we can be sure
+ the adjust will be done for it (since it makes jumps).
+ Do it now, so that if this is inside an argument
+ of a function, we don't get the stack adjustment
+ after some other args have already been pushed. */
+ do_pending_stack_adjust ();
+ return;
+
+ case RTL_EXPR:
+ return;
+
+ case SAVE_EXPR:
+ if (SAVE_EXPR_RTL (exp) != 0)
+ return;
+ }
+
+ nops = tree_code_length[(int) TREE_CODE (exp)];
+ for (i = 0; i < nops; i++)
+ if (TREE_OPERAND (exp, i) != 0)
+ {
+ register int type = *tree_code_type[(int) TREE_CODE (TREE_OPERAND (exp, i))];
+ if (type == 'e' || type == 'r')
+ preexpand_calls (TREE_OPERAND (exp, i));
+ }
+}
+\f
+/* Force FUNEXP into a form suitable for the address of a CALL,
+ and return that as an rtx. Also load the static chain register
+ from either FUNEXP or CONTEXT. */
+
+static rtx
+prepare_call_address (funexp, context)
+ rtx funexp;
+ rtx context;
+{
+ funexp = protect_from_queue (funexp, 0);
+ if (context != 0)
+ context = protect_from_queue (context, 0);
+
+ /* Function variable in language with nested functions. */
+ if (GET_MODE (funexp) == EPmode)
+ {
+ emit_move_insn (static_chain_rtx, gen_highpart (Pmode, funexp));
+ funexp = memory_address (FUNCTION_MODE, gen_lowpart (Pmode, funexp));
+ emit_insn (gen_rtx (USE, VOIDmode, static_chain_rtx));
+ }
+ else
+ {
+ if (context != 0)
+ /* Unless function variable in C, or top level function constant */
+ emit_move_insn (static_chain_rtx, lookup_static_chain (context));
+
+ /* Make a valid memory address and copy constants thru pseudo-regs,
+ but not for a constant address if -fno-function-cse. */
+ if (GET_CODE (funexp) != SYMBOL_REF)
+ funexp = memory_address (FUNCTION_MODE, funexp);
+ else
+ {
+#ifndef NO_FUNCTION_CSE
+ if (optimize && ! flag_no_function_cse)
+ funexp = force_reg (Pmode, funexp);
+#endif
+ }
+
+ if (context != 0)
+ emit_insn (gen_rtx (USE, VOIDmode, static_chain_rtx));
+ }
+ return funexp;
+}
+
+/* Generate instructions to call function FUNEXP,
+ and optionally pop the results.
+ The CALL_INSN is the first insn generated.
+
+ FUNTYPE is the data type of the function, or, for a library call,
+ the identifier for the name of the call. This is given to the
+ macro RETURN_POPS_ARGS to determine whether this function pops its own args.
+
+ STACK_SIZE is the number of bytes of arguments on the stack,
+ rounded up to STACK_BOUNDARY; zero if the size is variable.
+ This is both to put into the call insn and
+ to generate explicit popping code if necessary.
+
+ NEXT_ARG_REG is the rtx that results from executing
+ FUNCTION_ARG (args_so_far, VOIDmode, void_type_node, 1)
+ just after all the args have had their registers assigned.
+ This could be whatever you like, but normally it is the first
+ arg-register beyond those used for args in this call,
+ or 0 if all the arg-registers are used in this call.
+ It is passed on to `gen_call' so you can put this info in the call insn.
+
+ VALREG is a hard register in which a value is returned,
+ or 0 if the call does not return a value.
+
+ OLD_INHIBIT_DEFER_POP is the value that `inhibit_defer_pop' had before
+ the args to this call were processed.
+ We restore `inhibit_defer_pop' to that value.
+
+ USE_INSNS is a SEQUENCE of USE insns to be emitted immediately before
+ the actual CALL insn. */
+
+static void
+emit_call_1 (funexp, funtype, stack_size, next_arg_reg, valreg, old_inhibit_defer_pop, use_insns)
+ rtx funexp;
+ tree funtype;
+ int stack_size;
+ rtx next_arg_reg;
+ rtx valreg;
+ int old_inhibit_defer_pop;
+ rtx use_insns;
+{
+ rtx stack_size_rtx = gen_rtx (CONST_INT, VOIDmode, stack_size);
+ rtx call_insn;
+
+ if (valreg)
+ emit_call_insn (gen_call_value (valreg,
+ gen_rtx (MEM, FUNCTION_MODE, funexp),
+ stack_size_rtx, next_arg_reg));
+ else
+ emit_call_insn (gen_call (gen_rtx (MEM, FUNCTION_MODE, funexp),
+ stack_size_rtx, next_arg_reg));
+
+ /* Find the CALL insn we just emitted and write the USE insns before it. */
+ for (call_insn = get_last_insn();
+ call_insn && GET_CODE (call_insn) != CALL_INSN;
+ call_insn = PREV_INSN (call_insn))
+ ;
+
+ if (! call_insn)
+ abort ();
+
+ /* Put the USE insns before the CALL. */
+ emit_insn_before (use_insns, call_insn);
+
+ inhibit_defer_pop = old_inhibit_defer_pop;
+
+ /* If returning from the subroutine does not automatically pop the args,
+ we need an instruction to pop them sooner or later.
+ Perhaps do it now; perhaps just record how much space to pop later. */
+
+ if (! RETURN_POPS_ARGS (TREE_TYPE (funtype))
+ && stack_size != 0)
+ {
+ if (flag_defer_pop && inhibit_defer_pop == 0)
+ pending_stack_adjust += stack_size;
+ else
+ adjust_stack (stack_size_rtx);
+ }
+}
+
+/* At the start of a function, record that we have no previously-pushed
+ arguments waiting to be popped. */
+
+void
+init_pending_stack_adjust ()
+{
+ pending_stack_adjust = 0;
+}
+
+/* When exiting from function, if safe, clear out any pending stack adjust
+ so the adjustment won't get done. */
+
+void
+clear_pending_stack_adjust ()
+{
+#ifdef EXIT_IGNORE_STACK
+ if (!flag_omit_frame_pointer && EXIT_IGNORE_STACK
+ && ! TREE_INLINE (current_function_decl)
+ && ! flag_inline_functions)
+ pending_stack_adjust = 0;
+#endif
+}
+
+/* Pop any previously-pushed arguments that have not been popped yet. */
+
+void
+do_pending_stack_adjust ()
+{
+ if (inhibit_defer_pop == 0)
+ {
+ if (pending_stack_adjust != 0)
+ adjust_stack (gen_rtx (CONST_INT, VOIDmode, pending_stack_adjust));
+ pending_stack_adjust = 0;
+ }
+}
+
+/* Expand all cleanups up to OLD_CLEANUPS.
+ Needed here, and also for language-dependent calls. */
+void
+expand_cleanups_to (old_cleanups)
+ tree old_cleanups;
+{
+ while (cleanups_this_call != old_cleanups)
+ {
+ expand_expr (TREE_VALUE (cleanups_this_call), 0, VOIDmode, 0);
+ cleanups_this_call = TREE_CHAIN (cleanups_this_call);
+ }
+}
+\f
+/* Data structure and subroutines used within expand_call. */
+
+struct arg_data
+{
+ /* Tree node for this argument. */
+ tree tree_value;
+ /* Precomputed RTL value, or 0 if it isn't precomputed. */
+ rtx value;
+ /* Register to pass this argument in, or 0 if passed on stack. */
+ rtx reg;
+ /* Number of registers to use. 0 means put the whole arg in registers.
+ Also 0 if not passed in registers. */
+ int partial;
+ /* Offset of this argument from beginning of stack-args. */
+ struct args_size offset;
+ /* Size of this argument on the stack, rounded up for any padding it gets,
+ parts of the argument passed in registers do not count.
+ If the FIRST_PARM_CALLER_OFFSET is negative, then register parms
+ are counted here as well. */
+ struct args_size size;
+ /* Nonzero if this arg has already been stored. */
+ int stored;
+ /* const0_rtx means should preallocate stack space for this arg.
+ Other non0 value is the stack slot, preallocated.
+ Used only for BLKmode. */
+ rtx stack;
+};
+
+static void store_one_arg ();
+static rtx target_for_arg ();
+
+/* Generate all the code for a function call
+ and return an rtx for its value.
+ Store the value in TARGET (specified as an rtx) if convenient.
+ If the value is stored in TARGET then TARGET is returned.
+ If IGNORE is nonzero, then we ignore the value of the function call. */
+
+static rtx
+expand_call (exp, target, ignore, modifier)
+ tree exp;
+ rtx target;
+ int ignore;
+ enum expand_modifier modifier;
+{
+ /* List of actual parameters. */
+ tree actparms = TREE_OPERAND (exp, 1);
+ /* RTX for the function to be called. */
+ rtx funexp;
+ /* Data type of the function. */
+ tree funtype;
+ /* Declaration of the function being called,
+ or 0 if the function is computed (not known by name). */
+ tree fndecl = 0;
+
+ /* Register in which non-BLKmode value will be returned,
+ or 0 if no value or if value is BLKmode. */
+ rtx valreg;
+ /* Address where we should return a BLKmode value;
+ 0 if value not BLKmode. */
+ rtx structure_value_addr = 0;
+ /* Nonzero if that address is being passed by treating it as
+ an extra, implicit first parameter. Otherwise,
+ it is passed by being copied directly into struct_value_rtx. */
+ int structure_value_addr_parm = 0;
+ /* Nonzero if called function returns an aggregate in memory PCC style,
+ by returning the address of where to find it. */
+ int pcc_struct_value = 0;
+
+ /* Number of actual parameters in this call, including struct value addr. */
+ int num_actuals;
+ /* Number of named args. Args after this are anonymous ones
+ and they must all go on the stack. */
+ int n_named_args;
+
+ /* Vector of information about each argument.
+ Arguments are numbered in the order they will be pushed,
+ not the order they are written. */
+ struct arg_data *args;
+
+ /* Total size in bytes of all the stack-parms scanned so far. */
+ struct args_size args_size;
+ /* Remember initial value of args_size.constant. */
+ int starting_args_size;
+ /* Nonzero means count reg-parms' size in ARGS_SIZE. */
+ int stack_count_regparms = 0;
+ /* Data on reg parms scanned so far. */
+ CUMULATIVE_ARGS args_so_far;
+ /* Nonzero if a reg parm has been scanned. */
+ int reg_parm_seen;
+ /* Nonzero if we must avoid push-insns in the args for this call. */
+ int must_preallocate;
+ /* 1 if scanning parms front to back, -1 if scanning back to front. */
+ int inc;
+ /* Address of space preallocated for stack parms
+ (on machines that lack push insns), or 0 if space not preallocated. */
+ rtx argblock = 0;
+
+ /* Nonzero if it is plausible that this is a call to alloca. */
+ int may_be_alloca;
+ /* Nonzero if this is a call to setjmp or a related function. */
+ int is_setjmp;
+ /* Nonzero if this is a call to longjmp or a related function. */
+ int is_longjmp;
+ /* Nonzero if this is a call to an inline function. */
+ int is_integrable = 0;
+ /* Nonzero if this is a call to __builtin_new. */
+ int is_builtin_new;
+ /* Nonzero if this is a call to a `const' function. */
+ int is_const = 0;
+
+ /* Nonzero if there are BLKmode args whose data types require them
+ to be passed in memory, not (even partially) in registers. */
+ int BLKmode_parms_forced = 0;
+ /* The offset of the first BLKmode parameter which
+ *must* be passed in memory. */
+ int BLKmode_parms_first_offset = 0;
+ /* Total size of BLKmode parms which could usefully be preallocated. */
+ int BLKmode_parms_sizes = 0;
+
+ /* Amount stack was adjusted to protect BLKmode parameters
+ which are below the nominal "stack address" value. */
+ rtx protected_stack = 0;
+
+ /* The last insn before the things that are intrinsically part of the call.
+ The beginning reg-note goes on the insn after this one. */
+ rtx insn_before;
+
+ rtx old_stack_level = 0;
+ int old_pending_adj;
+ int old_inhibit_defer_pop = inhibit_defer_pop;
+ tree old_cleanups = cleanups_this_call;
+ rtx use_insns;
+
+ register tree p;
+ register int i;
+
+ /* See if we can find a DECL-node for the actual function.
+ As a result, decide whether this is a call to an integrable function. */
+
+ p = TREE_OPERAND (exp, 0);
+ if (TREE_CODE (p) == ADDR_EXPR)
+ {
+ fndecl = TREE_OPERAND (p, 0);
+ if (TREE_CODE (fndecl) != FUNCTION_DECL)
+ {
+ /* May still be a `const' function if it is
+ a call through a const function. */
+ fndecl = 0;
+ }
+ else
+ {
+ extern tree current_function_decl;
+ extern int flag_no_inline;
+
+ if (!flag_no_inline
+ && fndecl != current_function_decl
+ && DECL_SAVED_INSNS (fndecl))
+ is_integrable = 1;
+ else if (! TREE_ADDRESSABLE (fndecl))
+ {
+ /* In case this function later becomes inlineable,
+ record that there was already a non-inline call to it.
+
+ Use abstraction instead of setting TREE_ADDRESSABLE
+ directly. */
+ if (TREE_INLINE (fndecl) && extra_warnings)
+ warning_with_decl (fndecl, "can't inline call to `%s' which was declared inline");
+ mark_addressable (fndecl);
+ }
+
+ if (TREE_READONLY (fndecl) && ! TREE_THIS_VOLATILE (fndecl))
+ is_const = 1;
+ }
+ }
+
+ /* When calling a const function, we must pop the stack args right away,
+ so that the pop is deleted or moved with the call. */
+ if (is_const)
+ NO_DEFER_POP;
+
+ /* Set up a place to return a structure. */
+
+ /* Cater to broken compilers. */
+ if (aggregate_value_p (exp))
+ {
+ /* This call returns a big structure. */
+#ifdef PCC_STATIC_STRUCT_RETURN
+ if (flag_pcc_struct_return)
+ {
+ pcc_struct_value = 1;
+ is_integrable = 0; /* Easier than making that case work right. */
+ }
+ else
+#endif
+ {
+ if (target && GET_CODE (target) == MEM)
+ {
+ structure_value_addr = XEXP (target, 0);
+ if (reg_mentioned_p (stack_pointer_rtx, structure_value_addr))
+ structure_value_addr = copy_to_reg (structure_value_addr);
+ }
+ else
+ {
+ /* Make room on the stack to hold the value. */
+ structure_value_addr
+ = get_structure_value_addr (expr_size (exp));
+ target = 0;
+ }
+ }
+ }
+
+ /* If called function is inline, try to integrate it. */
+
+ if (is_integrable)
+ {
+ extern rtx expand_inline_function ();
+ rtx temp;
+
+ temp = expand_inline_function (fndecl, actparms, target,
+ ignore, TREE_TYPE (exp),
+ structure_value_addr);
+
+ /* If inlining succeeded, return. */
+ if ((int) temp != -1)
+ {
+ /* Perform all cleanups needed for the arguments of this call
+ (i.e. destructors in C++). It is ok if these destructors
+ clobber RETURN_VALUE_REG, because the only time we care about
+ this is when TARGET is that register. But in C++, we take
+ care to never return that register directly. */
+ expand_cleanups_to (old_cleanups);
+ return temp;
+ }
+
+ /* If inlining failed, mark FNDECL as needing to be compiled
+ separately after all.
+
+ Use abstraction instead of setting TREE_ADDRESSABLE directly. */
+ mark_addressable (fndecl);
+ }
+
+#if 0
+ /* Unless it's a call to a specific function that isn't alloca,
+ if it has one argument, we must assume it might be alloca. */
+
+ may_be_alloca =
+ (!(fndecl != 0
+ && strcmp (IDENTIFIER_POINTER (DECL_NAME (fndecl)),
+ "alloca"))
+ && actparms != 0
+ && TREE_CHAIN (actparms) == 0);
+#else
+ /* We assume that alloca will always be called by name. It
+ makes no sense to pass it as a pointer-to-function to
+ anything that does not understand its behavior. */
+ may_be_alloca =
+ (fndecl && (! strcmp (IDENTIFIER_POINTER (DECL_NAME (fndecl)), "alloca")
+ || ! strcmp (IDENTIFIER_POINTER (DECL_NAME (fndecl)),
+ "__builtin_alloca")));
+#endif
+
+ /* See if this is a call to a function that can return more than once. */
+
+ is_setjmp
+ = (fndecl != 0
+ && (!strcmp (IDENTIFIER_POINTER (DECL_NAME (fndecl)), "setjmp")
+ || !strcmp (IDENTIFIER_POINTER (DECL_NAME (fndecl)), "_setjmp")));
+
+ is_longjmp
+ = (fndecl != 0
+ && (!strcmp (IDENTIFIER_POINTER (DECL_NAME (fndecl)), "longjmp")
+ || !strcmp (IDENTIFIER_POINTER (DECL_NAME (fndecl)), "_longjmp")));
+
+ is_builtin_new
+ = (fndecl != 0
+ && (!strcmp (IDENTIFIER_POINTER (DECL_NAME (fndecl)), "__builtin_new")));
+
+ if (may_be_alloca)
+ {
+ frame_pointer_needed = 1;
+ may_call_alloca = 1;
+ current_function_calls_alloca = 1;
+ }
+
+ /* Don't let pending stack adjusts add up to too much.
+ Also, do all pending adjustments now
+ if there is any chance this might be a call to alloca (or longjmp). */
+
+ if (pending_stack_adjust >= 32
+ || (pending_stack_adjust > 0 && (may_be_alloca || is_setjmp || is_longjmp)))
+ do_pending_stack_adjust ();
+
+ /* Operand 0 is a pointer-to-function; get the type of the function. */
+ funtype = TREE_TYPE (TREE_OPERAND (exp, 0));
+ if (TREE_CODE (funtype) != POINTER_TYPE)
+ abort ();
+ funtype = TREE_TYPE (funtype);
+
+ /* If struct_value_rtx is 0, it means pass the address
+ as if it were an extra parameter. */
+ if (structure_value_addr && struct_value_rtx == 0)
+ {
+ rtx tem;
+
+ INIT_CUMULATIVE_ARGS (args_so_far, funtype);
+ tem = FUNCTION_ARG (args_so_far, Pmode,
+ build_pointer_type (TREE_TYPE (funtype)), 1);
+ if (tem == 0)
+ {
+ actparms = tree_cons (error_mark_node,
+ build (SAVE_EXPR,
+ type_for_size (GET_MODE_BITSIZE (Pmode), 0),
+ 0,
+ force_reg (Pmode, structure_value_addr)),
+ actparms);
+ structure_value_addr_parm = 1;
+ }
+ }
+
+ /* Count the arguments and set NUM_ACTUALS. */
+ for (p = actparms, i = 0; p; p = TREE_CHAIN (p)) i++;
+ num_actuals = i;
+
+ /* Compute number of named args.
+ Don't include the last named arg if anonymous args follow.
+ (If no anonymous args follow, the result of list_length
+ is actually one too large.) */
+ if (TYPE_ARG_TYPES (funtype) != 0)
+ n_named_args = list_length (TYPE_ARG_TYPES (funtype)) - 1;
+ else
+ /* If we know nothing, treat all args as named. */
+ n_named_args = num_actuals;
+
+ /* Make a vector to hold all the information about each arg. */
+ args = (struct arg_data *) alloca (num_actuals * sizeof (struct arg_data));
+ bzero (args, num_actuals * sizeof (struct arg_data));
+
+ args_size.constant = 0;
+ args_size.var = 0;
+#ifdef FIRST_PARM_CALLER_OFFSET
+ args_size.constant = FIRST_PARM_CALLER_OFFSET (funtype);
+ stack_count_regparms = 1;
+#endif
+ starting_args_size = args_size.constant;
+
+ /* In this loop, we consider args in the order they are written.
+ We fill up ARGS from the front of from the back if necessary
+ so that in any case the first arg to be pushed ends up at the front. */
+
+#ifdef PUSH_ARGS_REVERSED
+ i = num_actuals - 1, inc = -1;
+ /* In this case, must reverse order of args
+ so that we compute and push the last arg first. */
+#else
+ i = 0, inc = 1;
+#endif
+
+ INIT_CUMULATIVE_ARGS (args_so_far, funtype);
+
+ for (p = actparms; p; p = TREE_CHAIN (p), i += inc)
+ {
+ tree type = TREE_TYPE (TREE_VALUE (p));
+ args[i].tree_value = TREE_VALUE (p);
+ args[i].offset = args_size;
+
+ if (type == error_mark_node
+ || TYPE_SIZE (type) == 0)
+ continue;
+
+ /* Decide where to pass this arg. */
+ /* args[i].reg is nonzero if all or part is passed in registers.
+ args[i].partial is nonzero if part but not all is passed in registers,
+ and the exact value says how many words are passed in registers. */
+
+ if (TREE_CODE (TYPE_SIZE (type)) == INTEGER_CST
+ && args_size.var == 0
+ /* error_mark_node here is a flag for the fake argument
+ for a structure value address. */
+ && TREE_PURPOSE (p) != error_mark_node)
+ {
+ args[i].reg = FUNCTION_ARG (args_so_far, TYPE_MODE (type), type,
+ i < n_named_args);
+ /* If this argument needs more than the usual parm alignment, do
+ extrinsic padding to reach that alignment. */
+
+#ifdef MAX_PARM_BOUNDARY
+ /* If MAX_PARM_BOUNDARY is not defined, it means that the usual
+ alignment requirements are relaxed for parms, and that no parm
+ needs more than PARM_BOUNDARY, regardless of data type. */
+
+ if (PARM_BOUNDARY < TYPE_ALIGN (type))
+ {
+ int boundary = PARM_BOUNDARY;
+
+ /* Determine the boundary to pad up to. */
+ if (TYPE_ALIGN (type) > boundary)
+ boundary = TYPE_ALIGN (type);
+ if (boundary > MAX_PARM_BOUNDARY)
+ boundary = MAX_PARM_BOUNDARY;
+
+ /* If the previous args don't reach such a boundary,
+ advance to the next one. */
+ boundary /= BITS_PER_UNIT;
+ args[i].offset.constant += boundary - 1;
+ args[i].offset.constant &= ~(boundary - 1);
+ args_size.constant += boundary - 1;
+ args_size.constant &= ~(boundary - 1);
+
+ if (args_size.var != 0)
+ abort (); /* This case not implemented yet */
+ }
+#endif /* MAX_PARM_BOUNDARY */
+
+#ifdef FUNCTION_ARG_PARTIAL_NREGS
+ args[i].partial
+ = FUNCTION_ARG_PARTIAL_NREGS (args_so_far,
+ TYPE_MODE (type), type,
+ i < n_named_args);
+#endif
+ }
+
+ /* Compute the stack-size of this argument. */
+
+ if (args[i].reg != 0 && args[i].partial == 0
+ && ! stack_count_regparms)
+ /* On most machines, don't count stack space for a register arg. */
+ ;
+ else if (TYPE_MODE (type) != BLKmode)
+ {
+ register int size;
+
+ size = GET_MODE_SIZE (TYPE_MODE (type));
+ /* Compute how much space the push instruction will push.
+ On many machines, pushing a byte will advance the stack
+ pointer by a halfword. */
+#ifdef PUSH_ROUNDING
+ size = PUSH_ROUNDING (size);
+#endif
+ /* Compute how much space the argument should get:
+ maybe pad to a multiple of the alignment for arguments. */
+ if (none == FUNCTION_ARG_PADDING (TYPE_MODE (type), const0_rtx))
+ args[i].size.constant = size;
+ else
+ args[i].size.constant
+ = (((size + PARM_BOUNDARY / BITS_PER_UNIT - 1)
+ / (PARM_BOUNDARY / BITS_PER_UNIT))
+ * (PARM_BOUNDARY / BITS_PER_UNIT));
+ }
+ else
+ {
+ register tree size = size_in_bytes (type);
+
+ /* A nonscalar. Round its size up to a multiple
+ of PARM_BOUNDARY bits, unless it is not supposed to be padded. */
+ if (none
+ != FUNCTION_ARG_PADDING (TYPE_MODE (type),
+ expand_expr (size, 0, VOIDmode, 0)))
+ size = convert_units (convert_units (size, BITS_PER_UNIT,
+ PARM_BOUNDARY),
+ PARM_BOUNDARY, BITS_PER_UNIT);
+ ADD_PARM_SIZE (args[i].size, size);
+
+ /* Certain data types may not be passed in registers
+ (eg C++ classes with constructors).
+ Also, BLKmode parameters initialized from CALL_EXPRs
+ are treated specially, if it is a win to do so. */
+ if (TREE_CODE (TREE_VALUE (p)) == CALL_EXPR
+ || TREE_ADDRESSABLE (type))
+ {
+ if (TREE_ADDRESSABLE (type))
+ BLKmode_parms_forced = 1;
+ /* This is a marker for such a parameter. */
+ args[i].stack = const0_rtx;
+ BLKmode_parms_sizes += TREE_INT_CST_LOW (size);
+
+ /* If this parm's location is "below" the nominal stack pointer,
+ note to decrement the stack pointer while it is computed. */
+#ifdef FIRST_PARM_CALLER_OFFSET
+ if (BLKmode_parms_first_offset == 0)
+ BLKmode_parms_first_offset
+ /* If parameter's offset is variable, assume the worst. */
+ = (args[i].offset.var
+ ? FIRST_PARM_CALLER_OFFSET (funtype)
+ : args[i].offset.constant);
+#endif
+ }
+ }
+
+ /* If a part of the arg was put into registers,
+ don't include that part in the amount pushed. */
+ if (! stack_count_regparms)
+ args[i].size.constant
+ -= ((args[i].partial * UNITS_PER_WORD)
+ / (PARM_BOUNDARY / BITS_PER_UNIT)
+ * (PARM_BOUNDARY / BITS_PER_UNIT));
+
+ /* Update ARGS_SIZE, the total stack space for args so far. */
+
+ args_size.constant += args[i].size.constant;
+ if (args[i].size.var)
+ {
+ ADD_PARM_SIZE (args_size, args[i].size.var);
+ }
+
+ /* Increment ARGS_SO_FAR, which has info about which arg-registers
+ have been used, etc. */
+
+ FUNCTION_ARG_ADVANCE (args_so_far, TYPE_MODE (type), type,
+ i < n_named_args);
+ }
+
+ /* If we would have to push a partially-in-regs parm
+ before other stack parms, preallocate stack space instead. */
+ must_preallocate = 0;
+ {
+ int partial_seen = 0;
+ for (i = 0; i < num_actuals; i++)
+ {
+ if (args[i].partial > 0)
+ partial_seen = 1;
+ else if (partial_seen && args[i].reg == 0)
+ must_preallocate = 1;
+ }
+ }
+
+ /* Precompute all register parameters. It isn't safe to compute anything
+ once we have started filling any specific hard regs.
+ If this function call is cse'able, precompute all the parameters. */
+
+ reg_parm_seen = 0;
+ for (i = 0; i < num_actuals; i++)
+ if (args[i].reg != 0 || is_const)
+ {
+ int j;
+ int struct_value_lossage = 0;
+
+ /* First, see if this is a precomputed struct-returning function call
+ and other subsequent parms are also such. */
+ if ((TYPE_MODE (TREE_TYPE (args[i].tree_value)) == BLKmode
+ || RETURN_IN_MEMORY (TREE_TYPE (args[i].tree_value)))
+ && TREE_CODE (args[i].tree_value) == CALL_EXPR)
+ for (j = i + 1; j < num_actuals; j++)
+ if (((TYPE_MODE (TREE_TYPE (args[j].tree_value)) == BLKmode
+ || RETURN_IN_MEMORY (TREE_TYPE (args[j].tree_value)))
+ && TREE_CODE (args[j].tree_value) == CALL_EXPR
+ && args[j].reg != 0) || is_const)
+ {
+ /* We have two precomputed structure-values call expressions
+ in our parm list. Both of them would normally use
+ the structure-value block. To avoid the conflict,
+ compute this parm with a different temporary block. */
+ int size = int_size_in_bytes (TREE_TYPE (args[i].tree_value));
+ rtx structval = assign_stack_local (BLKmode, size);
+ args[i].value = expand_expr (args[i].tree_value, structval,
+ VOIDmode, 0);
+ struct_value_lossage = 1;
+ break;
+ }
+ if (!struct_value_lossage)
+ args[i].value = expand_expr (args[i].tree_value, 0, VOIDmode, 0);
+
+ if (args[i].reg != 0)
+ reg_parm_seen = 1;
+
+ if (GET_CODE (args[i].value) != MEM
+ && ! CONSTANT_P (args[i].value)
+ && GET_CODE (args[i].value) != CONST_DOUBLE)
+ args[i].value
+ = force_reg (TYPE_MODE (TREE_TYPE (args[i].tree_value)),
+ args[i].value);
+ /* ANSI doesn't require a sequence point here,
+ but PCC has one, so this will avoid some problems. */
+ emit_queue ();
+ }
+
+ /* Get the function to call, in the form of RTL, if it is a constant. */
+ if (fndecl && is_const)
+ {
+ /* Get a SYMBOL_REF rtx for the function address. */
+ funexp = XEXP (DECL_RTL (fndecl), 0);
+
+#ifndef NO_FUNCTION_CSE
+ /* Pass the address through a pseudoreg, if desired,
+ before the "beginning" of the library call.
+ So this insn isn't "part of" the library call, in case that
+ is deleted, or cse'd. */
+ if (! flag_no_function_cse)
+ funexp = copy_to_mode_reg (Pmode, funexp);
+#endif
+ }
+
+ /* Now we are about to start emitting insns that can be deleted
+ if the libcall is deleted. */
+ insn_before = get_last_insn ();
+
+ /* Maybe do additional rounding on the size of the arguments. */
+#ifdef STACK_ARGS_ADJUST
+ STACK_ARGS_ADJUST (args_size);
+#endif
+
+ /* If we have no actual push instructions, or shouldn't use them,
+ or we need a variable amount of space, make space for all args right now.
+ Round the needed size up to multiple of STACK_BOUNDARY. */
+
+ if (args_size.var != 0)
+ {
+ old_stack_level = copy_to_mode_reg (Pmode, stack_pointer_rtx);
+ old_pending_adj = pending_stack_adjust;
+ argblock = push_block (round_push (ARGS_SIZE_RTX (args_size)));
+ }
+ else if (args_size.constant > 0)
+ {
+ int needed = args_size.constant;
+
+#ifdef STACK_BOUNDARY
+ needed = (needed + STACK_BYTES - 1) / STACK_BYTES * STACK_BYTES;
+#endif
+ args_size.constant = needed;
+
+ if (
+#ifndef PUSH_ROUNDING
+ 1 /* Always preallocate if no push insns. */
+#else
+ must_preallocate || BLKmode_parms_forced
+ || BLKmode_parms_sizes > (args_size.constant >> 1)
+#endif
+ )
+ {
+ /* Try to reuse some or all of the pending_stack_adjust
+ to get this space. Maybe we can avoid any pushing. */
+ if (needed > pending_stack_adjust)
+ {
+ needed -= pending_stack_adjust;
+ pending_stack_adjust = 0;
+ }
+ else
+ {
+ pending_stack_adjust -= needed;
+ needed = 0;
+ }
+ argblock = push_block (gen_rtx (CONST_INT, VOIDmode, needed));
+
+ /* Once this space is used, we cannot give other calls
+ (which might be part of the args to this call)
+ access to this space. This is because there is
+ no way to say that we are building arguments
+ in a place which should not be deallocated by
+ `emit_call_1', which, by the way, is the way this
+ this space gets deallocated. */
+ do_pending_stack_adjust ();
+ }
+ }
+#ifndef PUSH_ROUNDING
+ else if (BLKmode_parms_forced)
+ {
+ /* If we have reg-parms that need to be temporarily on the stack,
+ set up an arg block address even though there is no space
+ to be allocated for it. */
+ argblock = push_block (const0_rtx);
+ }
+#endif
+
+#if 0
+ /* If stack needs padding below the args, increase all arg offsets
+ so the args are stored above the padding. */
+ if (stack_padding)
+ for (i = 0; i < num_actuals; i++)
+ args[i].offset.constant += stack_padding;
+#endif
+
+ /* Don't try to defer pops if preallocating, not even from the first arg,
+ since ARGBLOCK probably refers to the SP. */
+ if (argblock)
+ NO_DEFER_POP;
+
+#ifdef STACK_GROWS_DOWNWARD
+ /* If any BLKmode parms need to be preallocated in space
+ below the nominal stack-pointer address, we need to adjust the
+ stack pointer so that this location is temporarily above it.
+ This ensures that computation won't clobber that space. */
+ if (BLKmode_parms_first_offset < 0 && argblock != 0)
+ {
+ int needed = -BLKmode_parms_first_offset;
+ argblock = copy_to_reg (argblock);
+
+#ifdef STACK_BOUNDARY
+ needed = (needed + STACK_BYTES - 1) / STACK_BYTES * STACK_BYTES;
+#endif
+ protected_stack = gen_rtx (CONST_INT, VOIDmode, needed);
+ anti_adjust_stack (protected_stack);
+ }
+#endif /* STACK_GROWS_DOWNWARD */
+
+ /* Get the function to call, in the form of RTL. */
+ if (fndecl)
+ /* Get a SYMBOL_REF rtx for the function address. */
+ funexp = XEXP (DECL_RTL (fndecl), 0);
+ else
+ /* Generate an rtx (probably a pseudo-register) for the address. */
+ {
+ funexp = expand_expr (TREE_OPERAND (exp, 0), 0, VOIDmode, 0);
+ emit_queue ();
+ }
+
+ /* Figure out the register where the value, if any, will come back. */
+ valreg = 0;
+ if (TYPE_MODE (TREE_TYPE (exp)) != VOIDmode
+ && TYPE_MODE (TREE_TYPE (exp)) != BLKmode)
+ valreg = hard_function_value (TREE_TYPE (exp), fndecl);
+
+ /* Now compute and store all non-register parms.
+ These come before register parms, since they can require block-moves,
+ which could clobber the registers used for register parms.
+ Parms which have partial registers are not stored here,
+ but we do preallocate space here if they want that. */
+
+ for (i = 0; i < num_actuals; i++)
+ {
+ /* Preallocate the stack space for a parm if appropriate
+ so it can be computed directly in the stack space. */
+ if (args[i].stack != 0 && argblock != 0)
+ args[i].stack = target_for_arg (TREE_TYPE (args[i].tree_value),
+ ARGS_SIZE_RTX (args[i].size),
+ argblock, args[i].offset);
+ else
+ args[i].stack = 0;
+
+ if (args[i].reg == 0
+ && TYPE_SIZE (TREE_TYPE (args[i].tree_value)) != 0)
+ store_one_arg (&args[i], argblock, may_be_alloca);
+ }
+
+ /* Now store any partially-in-registers parm.
+ This is the last place a block-move can happen. */
+ if (reg_parm_seen)
+ for (i = 0; i < num_actuals; i++)
+ if (args[i].partial != 0)
+ store_one_arg (&args[i], argblock, may_be_alloca);
+
+ if (protected_stack != 0)
+ adjust_stack (protected_stack);
+
+ /* Pass the function the address in which to return a structure value. */
+ if (structure_value_addr && ! structure_value_addr_parm)
+ emit_move_insn (struct_value_rtx,
+ force_reg (Pmode, force_operand (structure_value_addr, 0)));
+
+ /* Now set up any wholly-register parms. They were computed already. */
+ if (reg_parm_seen)
+ for (i = 0; i < num_actuals; i++)
+ if (args[i].reg != 0 && args[i].partial == 0)
+ store_one_arg (&args[i], argblock, may_be_alloca);
+
+ /* Perform postincrements before actually calling the function. */
+ emit_queue ();
+
+ /* All arguments and registers used for the call must be set up by now! */
+
+ /* ??? Other languages need a nontrivial second argument (static chain). */
+ funexp = prepare_call_address (funexp, 0);
+
+ /* Mark all register-parms as living through the call. */
+ start_sequence ();
+ for (i = 0; i < num_actuals; i++)
+ if (args[i].reg != 0)
+ {
+ if (args[i].partial > 0)
+ use_regs (REGNO (args[i].reg), args[i].partial);
+ else if (GET_MODE (args[i].reg) == BLKmode)
+ use_regs (REGNO (args[i].reg),
+ ((int_size_in_bytes (TREE_TYPE (args[i].tree_value))
+ + UNITS_PER_WORD - 1)
+ / UNITS_PER_WORD));
+ else
+ emit_insn (gen_rtx (USE, VOIDmode, args[i].reg));
+ }
+
+ if (structure_value_addr && ! structure_value_addr_parm
+ && GET_CODE (struct_value_rtx) == REG)
+ emit_insn (gen_rtx (USE, VOIDmode, struct_value_rtx));
+
+ use_insns = gen_sequence ();
+ end_sequence ();
+
+ /* Generate the actual call instruction. */
+ /* This also has the effect of turning off any pop-inhibition
+ done in expand_call. */
+ if (args_size.constant < 0)
+ args_size.constant = 0;
+ emit_call_1 (funexp, funtype, args_size.constant,
+ FUNCTION_ARG (args_so_far, VOIDmode, void_type_node, 1),
+ valreg, old_inhibit_defer_pop, use_insns);
+
+/* ??? Nothing has been done here to record control flow
+ when contained functions can do nonlocal gotos. */
+
+ /* For calls to `setjmp', etc., inform flow.c it should complain
+ if nonvolatile values are live. */
+
+ if (is_setjmp)
+ {
+ emit_note (IDENTIFIER_POINTER (DECL_NAME (fndecl)), NOTE_INSN_SETJMP);
+ current_function_calls_setjmp = 1;
+ }
+
+ /* Notice functions that cannot return.
+ If optimizing, insns emitted below will be dead.
+ If not optimizing, they will exist, which is useful
+ if the user uses the `return' command in the debugger. */
+
+ if (fndecl && TREE_THIS_VOLATILE (fndecl))
+ emit_barrier ();
+
+ /* For calls to __builtin_new, note that it can never return 0.
+ This is because a new handler will be called, and 0 it not
+ among the numbers it is supposed to return. */
+#if 0
+ if (is_builtin_new)
+ emit_note (IDENTIFIER_POINTER (DECL_NAME (fndecl)), NOTE_INSN_BUILTIN_NEW);
+#endif
+
+ /* If there are cleanups to be called, don't use a hard reg as target. */
+ if (cleanups_this_call != old_cleanups
+ && target && REG_P (target)
+ && REGNO (target) < FIRST_PSEUDO_REGISTER)
+ target = 0;
+
+ /* If value type not void, return an rtx for the value. */
+
+ if (TYPE_MODE (TREE_TYPE (exp)) == VOIDmode
+ || ignore)
+ {
+ target = const0_rtx;
+ }
+ else if (structure_value_addr)
+ {
+ if (target == 0 || GET_CODE (target) != MEM)
+ target = gen_rtx (MEM, TYPE_MODE (TREE_TYPE (exp)),
+ memory_address (BLKmode, structure_value_addr));
+ }
+ else if (pcc_struct_value)
+ {
+ valreg = hard_function_value (build_pointer_type (TREE_TYPE (exp)),
+ fndecl);
+ if (target == 0)
+ target = gen_rtx (MEM, TYPE_MODE (TREE_TYPE (exp)),
+ copy_to_reg (valreg));
+ else if (TYPE_MODE (TREE_TYPE (exp)) != BLKmode)
+ emit_move_insn (target, gen_rtx (MEM, TYPE_MODE (TREE_TYPE (exp)),
+ copy_to_reg (valreg)));
+ else
+ emit_block_move (target, gen_rtx (MEM, BLKmode, copy_to_reg (valreg)),
+ expr_size (exp),
+ TYPE_ALIGN (TREE_TYPE (exp)) / BITS_PER_UNIT);
+ }
+ else if (target && GET_MODE (target) == TYPE_MODE (TREE_TYPE (exp)))
+ {
+ if (!rtx_equal_p (target, valreg))
+ emit_move_insn (target, valreg);
+ else
+ /* This tells expand_inline_function to copy valreg to its target. */
+ emit_insn (gen_rtx (USE, VOIDmode, valreg));
+ }
+ else
+ target = copy_to_reg (valreg);
+
+ /* Perform all cleanups needed for the arguments of this call
+ (i.e. destructors in C++). */
+ expand_cleanups_to (old_cleanups);
+
+ /* If size of args is variable, restore saved stack-pointer value. */
+
+ if (old_stack_level)
+ {
+ emit_move_insn (stack_pointer_rtx, old_stack_level);
+ pending_stack_adjust = old_pending_adj;
+ }
+
+ /* If call is cse'able, make appropriate pair of reg-notes around it. */
+ if (is_const)
+ {
+ rtx insn_first = NEXT_INSN (insn_before);
+ rtx insn_last = get_last_insn ();
+ rtx note = 0;
+
+ /* Don't put the notes on if we don't have insns that can hold them. */
+ if ((GET_CODE (insn_first) == INSN
+ || GET_CODE (insn_first) == CALL_INSN
+ || GET_CODE (insn_first) == JUMP_INSN)
+ && (GET_CODE (insn_last) == INSN
+ || GET_CODE (insn_last) == CALL_INSN
+ || GET_CODE (insn_last) == JUMP_INSN))
+ {
+ /* Construct an "equal form" for the value
+ which mentions all the arguments in order
+ as well as the function name. */
+ for (i = 0; i < num_actuals; i++)
+ if (args[i].reg != 0 || is_const)
+ note = gen_rtx (EXPR_LIST, VOIDmode, args[i].value, note);
+ note = gen_rtx (EXPR_LIST, VOIDmode,
+ XEXP (DECL_RTL (fndecl), 0), note);
+
+ REG_NOTES (insn_last)
+ = gen_rtx (EXPR_LIST, REG_EQUAL, note,
+ gen_rtx (INSN_LIST, REG_RETVAL, insn_first,
+ REG_NOTES (insn_last)));
+ REG_NOTES (insn_first)
+ = gen_rtx (INSN_LIST, REG_LIBCALL, insn_last,
+ REG_NOTES (insn_first));
+ }
+ }
+
+ return target;
+}
+\f
+/* Return an rtx which represents a suitable home on the stack
+ given TYPE, the type of the argument looking for a home.
+ This is called only for BLKmode arguments.
+
+ SIZE is the size needed for this target.
+ ARGS_ADDR is the address of the bottom of the argument block for this call.
+ OFFSET describes this parameter's offset into ARGS_ADDR. It is meaningless
+ if this machine uses push insns. */
+
+static rtx
+target_for_arg (type, size, args_addr, offset)
+ tree type;
+ rtx size;
+ rtx args_addr;
+ struct args_size offset;
+{
+ rtx target;
+ rtx offset_rtx = ARGS_SIZE_RTX (offset);
+
+ /* We do not call memory_address if possible,
+ because we want to address as close to the stack
+ as possible. For non-variable sized arguments,
+ this will be stack-pointer relative addressing. */
+ if (GET_CODE (offset_rtx) == CONST_INT)
+ target = plus_constant (args_addr, INTVAL (offset_rtx));
+ else
+ {
+ /* I have no idea how to guarantee that this
+ will work in the presence of register parameters. */
+ target = gen_rtx (PLUS, Pmode, args_addr, offset_rtx);
+ target = memory_address (QImode, target);
+ }
+
+ return gen_rtx (MEM, BLKmode, target);
+}
+\f
+/* Store a single argument for a function call
+ into the register or memory area where it must be passed.
+ *ARG describes the argument value and where to pass it.
+ ARGBLOCK is the address of the stack-block for all the arguments,
+ or 0 on a machine where arguemnts are pushed individually.
+ MAY_BE_ALLOCA nonzero says this could be a call to `alloca'
+ so must be careful about how the stack is used. */
+
+static void
+store_one_arg (arg, argblock, may_be_alloca)
+ struct arg_data *arg;
+ rtx argblock;
+ int may_be_alloca;
+{
+ register tree pval = arg->tree_value;
+ int used = 0;
+
+ if (TREE_CODE (pval) == ERROR_MARK)
+ return;
+
+ if (arg->reg != 0 && arg->partial == 0)
+ {
+ /* Being passed entirely in a register. */
+ if (arg->value != 0)
+ {
+ if (GET_MODE (arg->value) == BLKmode)
+ move_block_to_reg (REGNO (arg->reg), arg->value,
+ ((int_size_in_bytes (TREE_TYPE (pval))
+ + UNITS_PER_WORD - 1)
+ / UNITS_PER_WORD));
+ else
+ emit_move_insn (arg->reg, arg->value);
+ }
+ else
+ store_expr (pval, arg->reg, 0);
+
+ /* Don't allow anything left on stack from computation
+ of argument to alloca. */
+ if (may_be_alloca)
+ do_pending_stack_adjust ();
+ }
+ else if (TYPE_MODE (TREE_TYPE (pval)) != BLKmode)
+ {
+ register int size;
+ rtx tem;
+
+ /* Argument is a scalar, not entirely passed in registers.
+ (If part is passed in registers, arg->partial says how much
+ and emit_push_insn will take care of putting it there.)
+
+ Push it, and if its size is less than the
+ amount of space allocated to it,
+ also bump stack pointer by the additional space.
+ Note that in C the default argument promotions
+ will prevent such mismatches. */
+
+ used = size = GET_MODE_SIZE (TYPE_MODE (TREE_TYPE (pval)));
+ /* Compute how much space the push instruction will push.
+ On many machines, pushing a byte will advance the stack
+ pointer by a halfword. */
+#ifdef PUSH_ROUNDING
+ size = PUSH_ROUNDING (size);
+#endif
+ /* Compute how much space the argument should get:
+ round up to a multiple of the alignment for arguments. */
+ if (none != FUNCTION_ARG_PADDING (TYPE_MODE (TREE_TYPE (pval)), const0_rtx))
+ used = (((size + PARM_BOUNDARY / BITS_PER_UNIT - 1)
+ / (PARM_BOUNDARY / BITS_PER_UNIT))
+ * (PARM_BOUNDARY / BITS_PER_UNIT));
+
+ tem = arg->value;
+ if (tem == 0)
+ {
+ tem = expand_expr (pval, 0, VOIDmode, 0);
+ /* ANSI doesn't require a sequence point here,
+ but PCC has one, so this will avoid some problems. */
+ emit_queue ();
+ }
+
+ /* Don't allow anything left on stack from computation
+ of argument to alloca. */
+ if (may_be_alloca)
+ do_pending_stack_adjust ();
+
+ emit_push_insn (tem, TYPE_MODE (TREE_TYPE (pval)), 0, 0,
+ arg->partial, arg->reg, used - size,
+ argblock, ARGS_SIZE_RTX (arg->offset));
+ }
+ else if (arg->stack != 0)
+ {
+ /* BLKmode parm, not entirely passed in registers,
+ and with space already allocated. */
+
+ tree sizetree = size_in_bytes (TREE_TYPE (pval));
+
+ /* Find out if the parm needs padding, and whether above or below. */
+ enum direction where_pad
+ = FUNCTION_ARG_PADDING (TYPE_MODE (TREE_TYPE (pval)),
+ expand_expr (sizetree, 0, VOIDmode, 0));
+
+ /* If it is padded below, adjust the stack address
+ upward over the padding. */
+
+ if (where_pad == downward)
+ {
+ rtx offset_rtx;
+ rtx address = XEXP (arg->stack, 0);
+ struct args_size stack_offset;
+ /* Hack for C++: see assign_parms for symmetric code. */
+ int extra = 0;
+
+ stack_offset.constant = 0;
+ stack_offset.var = 0;
+
+ if (TREE_INT_CST_LOW (sizetree) * BITS_PER_UNIT != PARM_BOUNDARY)
+ {
+ /* Round the size up to multiple of PARM_BOUNDARY bits. */
+ tree s1 = convert_units (sizetree, BITS_PER_UNIT, PARM_BOUNDARY);
+ tree s2 = convert_units (s1, PARM_BOUNDARY, BITS_PER_UNIT);
+ /* Compute amount of padding. */
+ ADD_PARM_SIZE (stack_offset, s2);
+ SUB_PARM_SIZE (stack_offset, sizetree);
+ extra = stack_offset.constant % UNITS_PER_WORD;
+ stack_offset.constant -= extra;
+ }
+ offset_rtx = ARGS_SIZE_RTX (stack_offset);
+
+ /* If there is rounding to do for a BLKmode parameter,
+ add it in here, since STACK_OFFSET is not used for the
+ rest of this iteration. */
+ stack_offset.constant += extra;
+
+ /* Adjust the address to store at. */
+ if (GET_CODE (offset_rtx) == CONST_INT)
+ address = plus_constant (address, INTVAL (offset_rtx));
+ else
+ {
+ address = gen_rtx (PLUS, Pmode, address, offset_rtx);
+ address = memory_address (QImode, address);
+ }
+ arg->stack = change_address (arg->stack, VOIDmode, address);
+ }
+
+ /* ARG->stack probably refers to the stack-pointer. If so,
+ stabilize it, in case stack-pointer changes during evaluation. */
+ if (reg_mentioned_p (stack_pointer_rtx, arg->stack))
+ arg->stack = change_address (arg->stack, VOIDmode,
+ copy_to_reg (XEXP (arg->stack, 0)));
+ /* BLKmode argument that should go in a prespecified stack location. */
+ if (arg->value == 0)
+ /* Not yet computed => compute it there. */
+ /* ??? This should be changed to tell expand_expr
+ that it can store directly in the target. */
+ arg->value = store_expr (arg->tree_value, arg->stack, 0);
+ else if (arg->value != arg->stack)
+ /* It was computed somewhere, but not where we wanted.
+ For example, the value may have come from an official
+ local variable or parameter. In that case, expand_expr
+ does not fill our suggested target. */
+ emit_block_move (arg->stack, arg->value, ARGS_SIZE_RTX (arg->size),
+ TYPE_ALIGN (TREE_TYPE (pval)) / BITS_PER_UNIT);
+
+ /* Now, if this value wanted to be partly in registers,
+ move the value from the stack to the registers
+ that are supposed to hold the values. */
+ if (arg->partial > 0)
+ move_block_to_reg (REGNO (arg->reg), arg->stack, arg->partial);
+ }
+ else
+ {
+ /* BLKmode, at least partly to be pushed. */
+
+ register rtx tem
+ = arg->value ? arg->value : expand_expr (pval, 0, VOIDmode, 0);
+ register int excess;
+ rtx size_rtx;
+
+ /* Pushing a nonscalar.
+ If part is passed in registers, arg->partial says how much
+ and emit_push_insn will take care of putting it there. */
+
+ /* Round its size up to a multiple
+ of the allocation unit for arguments. */
+
+ if (arg->size.var != 0)
+ {
+ excess = 0;
+ size_rtx = ARGS_SIZE_RTX (arg->size);
+ }
+ else
+ {
+ register tree size = size_in_bytes (TREE_TYPE (pval));
+ /* PUSH_ROUNDING has no effect on us, because
+ emit_push_insn for BLKmode is careful to avoid it. */
+ excess = (arg->size.constant - TREE_INT_CST_LOW (size)
+ + arg->partial * UNITS_PER_WORD);
+ size_rtx = expand_expr (size, 0, VOIDmode, 0);
+ }
+
+ /* if (arg->stack) */
+ /* abort (); */
+
+ emit_push_insn (tem, TYPE_MODE (TREE_TYPE (pval)), size_rtx,
+ TYPE_ALIGN (TREE_TYPE (pval)) / BITS_PER_UNIT,
+ arg->partial, arg->reg, excess, argblock,
+ ARGS_SIZE_RTX (arg->offset));
+ }
+
+ /* Once we have pushed something, pops can't safely
+ be deferred during the rest of the arguments. */
+ NO_DEFER_POP;
+}
+\f
+/* Expand conditional expressions. */
+
+/* Generate code to evaluate EXP and jump to LABEL if the value is zero.
+ LABEL is an rtx of code CODE_LABEL, in this function and all the
+ functions here. */
+
+void
+jumpifnot (exp, label)
+ tree exp;
+ rtx label;
+{
+ do_jump (exp, label, 0);
+}
+
+/* Generate code to evaluate EXP and jump to LABEL if the value is nonzero. */
+
+void
+jumpif (exp, label)
+ tree exp;
+ rtx label;
+{
+ do_jump (exp, 0, label);
+}
+
+/* Generate code to evaluate EXP and jump to IF_FALSE_LABEL if
+ the result is zero, or IF_TRUE_LABEL if the result is one.
+ Either of IF_FALSE_LABEL and IF_TRUE_LABEL may be zero,
+ meaning fall through in that case.
+
+ This function is responsible for optimizing cases such as
+ &&, || and comparison operators in EXP. */
+
+void
+do_jump (exp, if_false_label, if_true_label)
+ tree exp;
+ rtx if_false_label, if_true_label;
+{
+ register enum tree_code code = TREE_CODE (exp);
+ /* Some cases need to create a label to jump to
+ in order to properly fall through.
+ These cases set DROP_THROUGH_LABEL nonzero. */
+ rtx drop_through_label = 0;
+ rtx temp;
+ rtx comparison = 0;
+
+ emit_queue ();
+
+ switch (code)
+ {
+ case ERROR_MARK:
+ break;
+
+ case INTEGER_CST:
+ temp = integer_zerop (exp) ? if_false_label : if_true_label;
+ if (temp)
+ emit_jump (temp);
+ break;
+
+ case ADDR_EXPR:
+ /* The address of something can never be zero. */
+ if (if_true_label)
+ emit_jump (if_true_label);
+ break;
+
+ case NOP_EXPR:
+ do_jump (TREE_OPERAND (exp, 0), if_false_label, if_true_label);
+ break;
+
+ case TRUTH_NOT_EXPR:
+ do_jump (TREE_OPERAND (exp, 0), if_true_label, if_false_label);
+ break;
+
+ case TRUTH_ANDIF_EXPR:
+ if (if_false_label == 0)
+ if_false_label = drop_through_label = gen_label_rtx ();
+ do_jump (TREE_OPERAND (exp, 0), if_false_label, 0);
+ do_jump (TREE_OPERAND (exp, 1), if_false_label, if_true_label);
+ break;
+
+ case TRUTH_ORIF_EXPR:
+ if (if_true_label == 0)
+ if_true_label = drop_through_label = gen_label_rtx ();
+ do_jump (TREE_OPERAND (exp, 0), 0, if_true_label);
+ do_jump (TREE_OPERAND (exp, 1), if_false_label, if_true_label);
+ break;
+
+ case COMPOUND_EXPR:
+ expand_expr (TREE_OPERAND (exp, 0), const0_rtx, VOIDmode, 0);
+ emit_queue ();
+ do_jump (TREE_OPERAND (exp, 1), if_false_label, if_true_label);
+ break;
+
+ case COND_EXPR:
+ {
+ register rtx label1 = gen_label_rtx ();
+ drop_through_label = gen_label_rtx ();
+ do_jump (TREE_OPERAND (exp, 0), label1, 0);
+ /* Now the THEN-expression. */
+ do_jump (TREE_OPERAND (exp, 1),
+ if_false_label ? if_false_label : drop_through_label,
+ if_true_label ? if_true_label : drop_through_label);
+ emit_label (label1);
+ /* Now the ELSE-expression. */
+ do_jump (TREE_OPERAND (exp, 2),
+ if_false_label ? if_false_label : drop_through_label,
+ if_true_label ? if_true_label : drop_through_label);
+ }
+ break;
+
+ case EQ_EXPR:
+ comparison = compare (exp, EQ, EQ, EQ, EQ);
+ break;
+
+ case NE_EXPR:
+ comparison = compare (exp, NE, NE, NE, NE);
+ break;
+
+ case LT_EXPR:
+ comparison = compare (exp, LT, LTU, GT, GTU);
+ break;
+
+ case LE_EXPR:
+ comparison = compare (exp, LE, LEU, GE, GEU);
+ break;
+
+ case GT_EXPR:
+ comparison = compare (exp, GT, GTU, LT, LTU);
+ break;
+
+ case GE_EXPR:
+ comparison = compare (exp, GE, GEU, LE, LEU);
+ break;
+
+ default:
+ temp = expand_expr (exp, 0, VOIDmode, 0);
+ /* Copy to register to avoid generating bad insns by cse
+ from (set (mem ...) (arithop)) (set (cc0) (mem ...)). */
+ if (!cse_not_expected && GET_CODE (temp) == MEM)
+ temp = copy_to_reg (temp);
+ do_pending_stack_adjust ();
+ {
+ rtx zero = CONST0_RTX (GET_MODE (temp));
+
+ if (GET_CODE (temp) == CONST_INT)
+ comparison = compare_constants (NE, 0,
+ INTVAL (temp), 0, BITS_PER_WORD);
+ else if (GET_MODE (temp) != VOIDmode)
+ comparison = compare1 (temp, zero, NE, NE, 0, GET_MODE (temp));
+ else
+ abort ();
+ }
+ }
+
+ /* Do any postincrements in the expression that was tested. */
+ emit_queue ();
+
+ /* If COMPARISON is nonzero here, it is an rtx that can be substituted
+ straight into a conditional jump instruction as the jump condition.
+ Otherwise, all the work has been done already. */
+
+ if (comparison == const1_rtx)
+ {
+ if (if_true_label)
+ emit_jump (if_true_label);
+ }
+ else if (comparison == const0_rtx)
+ {
+ if (if_false_label)
+ emit_jump (if_false_label);
+ }
+ else if (comparison)
+ {
+ if (if_true_label)
+ {
+ if (bcc_gen_fctn[(int) GET_CODE (comparison)] != 0)
+ emit_jump_insn ((*bcc_gen_fctn[(int) GET_CODE (comparison)]) (if_true_label));
+ else
+ abort ();
+
+ if (if_false_label)
+ emit_jump (if_false_label);
+ }
+ else if (if_false_label)
+ {
+ rtx pat;
+
+ if (bcc_gen_fctn[(int) GET_CODE (comparison)] == 0)
+ abort ();
+
+ pat = (*bcc_gen_fctn[(int) GET_CODE (comparison)]) (if_false_label);
+ /* Now invert the sense of the jump by exchanging the two arms
+ of each IF_THEN_ELSE. Note that inverting the condition
+ would be incorrect for IEEE floating point with nans! */
+ if (GET_CODE (pat) == SEQUENCE)
+ {
+ int i;
+ /* We can invert a sequence if the only jump is at the end. */
+ for (i = 0; i < (int) (XVECLEN (pat, 0) - 1); i++)
+ if (GET_CODE (XVECEXP (pat, 0, i)) == JUMP_INSN)
+ abort ();
+ invert_exp (PATTERN (XVECEXP (pat, 0, XVECLEN (pat, 0) - 1)),
+ 0, 0);
+ }
+ else
+ invert_exp (pat, 0, 0);
+
+ emit_jump_insn (pat);
+ }
+ }
+
+ if (drop_through_label)
+ emit_label (drop_through_label);
+}
+\f
+/* Compare two integer constant rtx's, OP0 and OP1.
+ The comparison operation is OPERATION.
+ Return an rtx representing the value 1 or 0.
+ WIDTH is the width in bits that is significant. */
+
+static rtx
+compare_constants (operation, unsignedp, op0, op1, width)
+ enum rtx_code operation;
+ int unsignedp;
+ int op0, op1;
+ int width;
+{
+ int val;
+
+ /* Sign-extend or zero-extend the operands to a full word
+ from an initial width of WIDTH bits. */
+ if (width < HOST_BITS_PER_INT)
+ {
+ op0 &= (1 << width) - 1;
+ op1 &= (1 << width) - 1;
+
+ if (! unsignedp)
+ {
+ if (op0 & (1 << (width - 1)))
+ op0 |= ((-1) << width);
+ if (op1 & (1 << (width - 1)))
+ op1 |= ((-1) << width);
+ }
+ }
+
+ switch (operation)
+ {
+ case EQ:
+ val = op0 == op1;
+ break;
+
+ case NE:
+ val = op0 != op1;
+ break;
+
+ case GT:
+ case GTU:
+ val = op0 > op1;
+ break;
+
+ case LT:
+ case LTU:
+ val = op0 < op1;
+ break;
+
+ case GE:
+ case GEU:
+ val = op0 >= op1;
+ break;
+
+ case LE:
+ case LEU:
+ val = op0 <= op1;
+ }
+
+ return val ? const1_rtx : const0_rtx;
+}
+\f
+/* Generate code for a comparison expression EXP
+ (including code to compute the values to be compared)
+ and set (CC0) according to the result.
+ SIGNED_FORWARD should be the rtx operation for this comparison for
+ signed data; UNSIGNED_FORWARD, likewise for use if data is unsigned.
+ SIGNED_REVERSE and UNSIGNED_REVERSE are used if it is desirable
+ to interchange the operands for the compare instruction.
+
+ We force a stack adjustment unless there are currently
+ things pushed on the stack that aren't yet used. */
+
+static rtx
+compare (exp, signed_forward, unsigned_forward,
+ signed_reverse, unsigned_reverse)
+ register tree exp;
+ enum rtx_code signed_forward, unsigned_forward;
+ enum rtx_code signed_reverse, unsigned_reverse;
+{
+
+ register rtx op0 = expand_expr (TREE_OPERAND (exp, 0), 0, VOIDmode, 0);
+ register rtx op1 = expand_expr (TREE_OPERAND (exp, 1), 0, VOIDmode, 0);
+ register enum machine_mode mode = GET_MODE (op0);
+ int unsignedp;
+
+ /* If one operand is 0, make it the second one. */
+
+ if (op0 == const0_rtx
+ || (GET_MODE_CLASS (mode) == MODE_FLOAT && op0 == CONST0_RTX (mode)))
+ {
+ rtx tem = op0;
+ op0 = op1;
+ op1 = tem;
+ signed_forward = signed_reverse;
+ unsigned_forward = unsigned_reverse;
+ }
+
+ if (flag_force_mem)
+ {
+ op0 = force_not_mem (op0);
+ op1 = force_not_mem (op1);
+ }
+
+ do_pending_stack_adjust ();
+
+ unsignedp = (TREE_UNSIGNED (TREE_TYPE (TREE_OPERAND (exp, 0)))
+ || TREE_UNSIGNED (TREE_TYPE (TREE_OPERAND (exp, 1))));
+
+ if (GET_CODE (op0) == CONST_INT && GET_CODE (op1) == CONST_INT)
+ return compare_constants (signed_forward, unsignedp,
+ INTVAL (op0), INTVAL (op1),
+ GET_MODE_BITSIZE (TYPE_MODE (TREE_TYPE (TREE_OPERAND (exp, 0)))));
+
+ emit_cmp_insn (op0, op1,
+ (mode == BLKmode) ? expr_size (TREE_OPERAND (exp, 0)) : 0,
+ unsignedp,
+ TYPE_ALIGN (TREE_TYPE (exp)) / BITS_PER_UNIT);
+
+ return gen_rtx ((unsignedp ? unsigned_forward : signed_forward),
+ VOIDmode, cc0_rtx, const0_rtx);
+}
+
+/* Like compare but expects the values to compare as two rtx's.
+ The decision as to signed or unsigned comparison must be made by the caller.
+ BLKmode is not allowed. */
+
+static rtx
+compare1 (op0, op1, forward_op, reverse_op, unsignedp, mode)
+ register rtx op0, op1;
+ enum rtx_code forward_op, reverse_op;
+ int unsignedp;
+ enum machine_mode mode;
+{
+ /* If one operand is 0, make it the second one. */
+
+ if (op0 == const0_rtx
+ || (GET_MODE_CLASS (mode) == MODE_FLOAT && op0 == CONST0_RTX (mode)))
+ {
+ rtx tem = op0;
+ op0 = op1;
+ op1 = tem;
+ forward_op = reverse_op;
+ }
+
+ if (flag_force_mem)
+ {
+ op0 = force_not_mem (op0);
+ op1 = force_not_mem (op1);
+ }
+
+ do_pending_stack_adjust ();
+
+ if (GET_CODE (op0) == CONST_INT && GET_CODE (op1) == CONST_INT)
+ return compare_constants (forward_op, unsignedp,
+ INTVAL (op0), INTVAL (op1),
+ GET_MODE_BITSIZE (mode));
+
+ emit_cmp_insn (op0, op1, 0, unsignedp, 0);
+
+ return gen_rtx (forward_op, VOIDmode, cc0_rtx, const0_rtx);
+}
+\f
+/* Generate code to calculate EXP using a store-flag instruction
+ and return an rtx for the result.
+ If TARGET is nonzero, store the result there if convenient.
+
+ Return zero if there is no suitable set-flag instruction
+ available on this machine. */
+
+static rtx
+do_store_flag (exp, target, mode)
+ tree exp;
+ rtx target;
+ enum machine_mode mode;
+{
+ register enum tree_code code = TREE_CODE (exp);
+ register rtx comparison = 0;
+ enum machine_mode compare_mode;
+ rtx prev_insn = get_last_insn ();
+ enum insn_code icode;
+
+ switch (code)
+ {
+#ifdef HAVE_seq
+ case EQ_EXPR:
+ if (HAVE_seq)
+ {
+ comparison = compare (exp, EQ, EQ, EQ, EQ);
+ icode = CODE_FOR_seq;
+ compare_mode = insn_operand_mode[(int) CODE_FOR_seq][0];
+ }
+ break;
+#endif
+
+#ifdef HAVE_sne
+ case NE_EXPR:
+ if (HAVE_sne)
+ {
+ comparison = compare (exp, NE, NE, NE, NE);
+ icode = CODE_FOR_sne;
+ compare_mode = insn_operand_mode[(int) CODE_FOR_sne][0];
+ }
+ break;
+#endif
+
+#if defined (HAVE_slt) && defined (HAVE_sltu) && defined (HAVE_sgt) && defined (HAVE_sgtu)
+ case LT_EXPR:
+ if (HAVE_slt && HAVE_sltu && HAVE_sgt && HAVE_sgtu)
+ {
+ comparison = compare (exp, LT, LTU, GT, GTU);
+ icode = CODE_FOR_slt;
+ compare_mode = insn_operand_mode[(int) CODE_FOR_slt][0];
+ }
+ break;
+
+ case GT_EXPR:
+ if (HAVE_slt && HAVE_sltu && HAVE_sgt && HAVE_sgtu)
+ {
+ comparison = compare (exp, GT, GTU, LT, LTU);
+ icode = CODE_FOR_slt;
+ compare_mode = insn_operand_mode[(int) CODE_FOR_slt][0];
+ }
+ break;
+#endif
+
+#if defined (HAVE_sle) && defined (HAVE_sleu) && defined (HAVE_sge) && defined (HAVE_sgeu)
+ case LE_EXPR:
+ if (HAVE_sle && HAVE_sleu && HAVE_sge && HAVE_sgeu)
+ {
+ comparison = compare (exp, LE, LEU, GE, GEU);
+ icode = CODE_FOR_sle;
+ compare_mode = insn_operand_mode[(int) CODE_FOR_sle][0];
+ }
+ break;
+
+ case GE_EXPR:
+ if (HAVE_sle && HAVE_sleu && HAVE_sge && HAVE_sgeu)
+ {
+ comparison = compare (exp, GE, GEU, LE, LEU);
+ icode = CODE_FOR_sle;
+ compare_mode = insn_operand_mode[(int) CODE_FOR_sle][0];
+ }
+ break;
+#endif
+ }
+ if (comparison == 0)
+ return 0;
+
+ if (target == 0 || GET_MODE (target) != mode
+ /* Don't use specified target unless the insn can handle it. */
+ || ! (*insn_operand_predicate[(int) icode][0]) (target, mode)
+ /* When modes don't match, don't use specified target,
+ because it might be the same as an operand,
+ and then the CLOBBER output below would screw up. */
+ || (mode != compare_mode && GET_CODE (comparison) != CONST_INT))
+ target = gen_reg_rtx (mode);
+
+ /* Store the comparison in its proper mode. */
+ if (GET_CODE (comparison) == CONST_INT)
+ emit_move_insn (target, comparison);
+ else if (GET_MODE (target) != compare_mode)
+ {
+ /* We want a different mode: store result in its natural mode.
+ Combine the mode conversion with the truncation we must do anyway. */
+ /* Put a CLOBBER before the compare, so we don't come between
+ the compare and the insn that uses the result. */
+ emit_insn_after (gen_rtx (CLOBBER, VOIDmode, target), prev_insn);
+ emit_insn ((*setcc_gen_fctn[(int) GET_CODE (comparison)])
+ (gen_rtx (SUBREG, compare_mode, target, 0)));
+ /* If the desired mode is wider than what we got,
+ use an AND to convert it, but not if we will do one anyway. */
+#if STORE_FLAG_VALUE == 1
+ if (GET_MODE_SIZE (mode) > GET_MODE_SIZE (compare_mode))
+ expand_bit_and (mode, target, const1_rtx, target);
+#endif
+ }
+ else
+ emit_insn ((*setcc_gen_fctn[(int) GET_CODE (comparison)]) (target));
+
+#if STORE_FLAG_VALUE != 1
+#if STORE_FLAG_VALUE & 1
+ expand_bit_and (mode, target, const1_rtx, target);
+#else
+ expand_shift (RSHIFT_EXPR, mode, target,
+ build_int_2 (GET_MODE_BITSIZE (mode) - 1, 0),
+ target, TRUE);
+#endif
+#endif
+ return target;
+}
+\f
+/* Generate a tablejump instruction (used for switch statements). */
+
+#ifdef HAVE_tablejump
+
+/* INDEX is the value being switched on, with the lowest value
+ in the table already subtracted.
+ RANGE is the length of the jump table.
+ TABLE_LABEL is a CODE_LABEL rtx for the table itself.
+
+ DEFAULT_LABEL is a CODE_LABEL rtx to jump to if the
+ index value is out of range. */
+
+void
+do_tablejump (index, range, table_label, default_label)
+ rtx index, range, table_label, default_label;
+{
+ register rtx temp;
+
+ emit_cmp_insn (range, index, 0, 0, 0);
+ emit_jump_insn (gen_bltu (default_label));
+ /* If flag_force_addr were to affect this address
+ it could interfere with the tricky assumptions made
+ about addresses that contain label-refs,
+ which may be valid only very near the tablejump itself. */
+ index = memory_address_noforce
+ (CASE_VECTOR_MODE,
+ gen_rtx (PLUS, Pmode,
+ gen_rtx (MULT, Pmode, index,
+ gen_rtx (CONST_INT, VOIDmode,
+ GET_MODE_SIZE (CASE_VECTOR_MODE))),
+ gen_rtx (LABEL_REF, VOIDmode, table_label)));
+ temp = gen_reg_rtx (CASE_VECTOR_MODE);
+ convert_move (temp, gen_rtx (MEM, CASE_VECTOR_MODE, index), 0);
+
+ emit_jump_insn (gen_tablejump (temp, table_label));
+}
+
+#endif /* HAVE_tablejump */