BSD 4_4_Lite2 development

Work on file usr/src/contrib/gdb-4.7.LBL/gdb/coredep.c

Synthesized-from: CSRG/cd3/4.4BSD-Lite2

diff --git a/usr/src/contrib/gdb-4.7.LBL/gdb/coredep.c b/usr/src/contrib/gdb-4.7.LBL/gdb/coredep.c
new file mode 100644 (file)
index 0000000..04ff282
--- /dev/null
+++ b/usr/src/contrib/gdb-4.7.LBL/gdb/coredep.c
@@ -0,0 +1,109 @@
+/* Extract registers from a "standard" core file, for GDB.
+   Copyright (C) 1988-1991  Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
+
+/* core.c is supposed to be the more machine-independent aspects of this;
+   this file is more machine-specific.  */
+
+#include "defs.h"
+#include <sys/types.h>
+#include <sys/param.h>
+#include "gdbcore.h"
+#include "nm.h"
+
+/* These are needed on various systems to expand REGISTER_U_ADDR.  */
+#ifndef USG
+#include <sys/dir.h>
+#include <sys/file.h>
+#include <sys/stat.h>
+#include <sys/user.h>
+#include <sys/ptrace.h>
+#endif
+
+/* Extract the register values out of the core file and store
+   them where `read_register' will find them.
+
+   CORE_REG_SECT points to the register values themselves, read into memory.
+   CORE_REG_SIZE is the size of that area.
+   WHICH says which set of registers we are handling (0 = int, 2 = float
+         on machines where they are discontiguous).
+   REG_ADDR is the offset from u.u_ar0 to the register values relative to
+            core_reg_sect.  This is used with old-fashioned core files to
+           locate the registers in a large upage-plus-stack ".reg" section.
+           Original upage address X is at location core_reg_sect+x+reg_addr.
+ */
+
+void
+fetch_core_registers (core_reg_sect, core_reg_size, which, reg_addr)
+     char *core_reg_sect;
+     unsigned core_reg_size;
+     int which;
+     unsigned reg_addr;
+{
+  register int regno;
+  register unsigned int addr;
+  int bad_reg = -1;
+  register reg_ptr = -reg_addr;                /* Original u.u_ar0 is -reg_addr. */
+
+  /* If u.u_ar0 was an absolute address in the core file, relativize it now,
+     so we can use it as an offset into core_reg_sect.  When we're done,
+     "register 0" will be at core_reg_sect+reg_ptr, and we can use
+     register_addr to offset to the other registers.  If this is a modern
+     core file without a upage, reg_ptr will be zero and this is all a big
+     NOP.  */
+  if (reg_ptr > core_reg_size)
+    reg_ptr -= KERNEL_U_ADDR;
+
+  for (regno = 0; regno < NUM_REGS; regno++)
+    {
+      addr = register_addr (regno, reg_ptr);
+      if (addr >= core_reg_size) {
+       if (bad_reg < 0)
+         bad_reg = regno;
+      } else {
+       supply_register (regno, core_reg_sect + addr);
+      }
+    }
+  if (bad_reg >= 0)
+    {
+      error ("Register %s not found in core file.", reg_names[bad_reg]);
+    }
+}
+
+
+#ifdef REGISTER_U_ADDR
+
+/* Return the address in the core dump or inferior of register REGNO.
+   BLOCKEND is the address of the end of the user structure.  */
+
+unsigned int
+register_addr (regno, blockend)
+     int regno;
+     int blockend;
+{
+  int addr;
+
+  if (regno < 0 || regno >= NUM_REGS)
+    error ("Invalid register number %d.", regno);
+
+  REGISTER_U_ADDR (addr, blockend, regno);
+
+  return addr;
+}
+
+#endif /* REGISTER_U_ADDR */