+/* Data flow analysis for GNU compiler.
+ Copyright (C) 1987, 1988 Free Software Foundation, Inc.
+
+This file is part of GNU CC.
+
+GNU CC is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 1, or (at your option)
+any later version.
+
+GNU CC is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU CC; see the file COPYING. If not, write to
+the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */
+
+
+/* This file contains the data flow analysis pass of the compiler.
+ It computes data flow information
+ which tells combine_instructions which insns to consider combining
+ and controls register allocation.
+
+ Additional data flow information that is too bulky to record
+ is generated during the analysis, and is used at that time to
+ create autoincrement and autodecrement addressing.
+
+ The first step is dividing the function into basic blocks.
+ find_basic_blocks does this. Then life_analysis determines
+ where each register is live and where it is dead.
+
+ ** find_basic_blocks **
+
+ find_basic_blocks divides the current function's rtl
+ into basic blocks. It records the beginnings and ends of the
+ basic blocks in the vectors basic_block_head and basic_block_end,
+ and the number of blocks in n_basic_blocks.
+
+ find_basic_blocks also finds any unreachable loops
+ and deletes them.
+
+ ** life_analysis **
+
+ life_analysis is called immediately after find_basic_blocks.
+ It uses the basic block information to determine where each
+ hard or pseudo register is live.
+
+ ** live-register info **
+
+ The information about where each register is live is in two parts:
+ the REG_NOTES of insns, and the vector basic_block_live_at_start.
+
+ basic_block_live_at_start has an element for each basic block,
+ and the element is a bit-vector with a bit for each hard or pseudo
+ register. The bit is 1 if the register is live at the beginning
+ of the basic block.
+
+ To each insn's REG_NOTES is added an element for each register
+ that is live before the insn or set by the insn, but is dead
+ after the insn.
+
+ To determine which registers are live after any insn, one can
+ start from the beginning of the basic block and scan insns, noting
+ which registers are set by each insn and which die there.
+
+ ** Other actions of life_analysis **
+
+ life_analysis sets up the LOG_LINKS fields of insns because the
+ information needed to do so is readily available.
+
+ life_analysis deletes insns whose only effect is to store a value
+ that is never used.
+
+ life_analysis notices cases where a reference to a register as
+ a memory address can be combined with a preceding or following
+ incrementation or decrementation of the register. The separate
+ instruction to increment or decrement is deleted and the address
+ is changed to a POST_INC or similar rtx.
+
+ Each time an incrementing or decrementing address is created,
+ a REG_INC element is added to the insn's REG_NOTES list.
+
+ life_analysis fills in certain vectors containing information about
+ register usage: reg_n_refs, reg_n_deaths, reg_n_sets,
+ reg_live_length, reg_n_calls_crosses and reg_basic_block. */
+\f
+#include <stdio.h>
+#include "config.h"
+#include "rtl.h"
+#include "basic-block.h"
+#include "regs.h"
+#include "hard-reg-set.h"
+#include "flags.h"
+
+#include "obstack.h"
+#define obstack_chunk_alloc xmalloc
+#define obstack_chunk_free free
+
+extern int xmalloc ();
+extern void free ();
+
+/* Get the basic block number of an insn.
+ This info should not be expected to remain available
+ after the end of life_analysis. */
+
+#define BLOCK_NUM(INSN) uid_block_number[INSN_UID (INSN)]
+
+/* This is where the BLOCK_NUM values are really stored.
+ This is set up by find_basic_blocks and used there and in life_analysis,
+ and then freed. */
+
+static short *uid_block_number;
+
+/* INSN_VOLATILE (insn) is 1 if the insn refers to anything volatile. */
+
+#define INSN_VOLATILE(INSN) uid_volatile[INSN_UID (INSN)]
+static char *uid_volatile;
+
+/* Number of basic blocks in the current function. */
+
+int n_basic_blocks;
+
+/* Maximum register number used in this function, plus one. */
+
+int max_regno;
+
+/* Indexed by n, gives number of basic block that (REG n) is used in.
+ If the value is REG_BLOCK_GLOBAL (-2),
+ it means (REG n) is used in more than one basic block.
+ REG_BLOCK_UNKNOWN (-1) means it hasn't been seen yet so we don't know.
+ This information remains valid for the rest of the compilation
+ of the current function; it is used to control register allocation. */
+
+short *reg_basic_block;
+
+/* Indexed by n, gives number of times (REG n) is used or set, each
+ weighted by its loop-depth.
+ This information remains valid for the rest of the compilation
+ of the current function; it is used to control register allocation. */
+
+short *reg_n_refs;
+
+/* Indexed by n, gives number of times (REG n) is set.
+ This information remains valid for the rest of the compilation
+ of the current function; it is used to control register allocation. */
+
+short *reg_n_sets;
+
+/* Indexed by N, gives number of places register N dies.
+ This information remains valid for the rest of the compilation
+ of the current function; it is used to control register allocation. */
+
+short *reg_n_deaths;
+
+/* Indexed by N, gives 1 if that reg is live across any CALL_INSNs.
+ This information remains valid for the rest of the compilation
+ of the current function; it is used to control register allocation. */
+
+int *reg_n_calls_crossed;
+
+/* Indexed by N, gives the uid of the first insn that mentions reg N,
+ provided that reg is local to one basic block.
+ The value here is undefined otherwise. */
+
+rtx *reg_first_use;
+
+/* Total number of instructions at which (REG n) is live.
+ The larger this is, the less priority (REG n) gets for
+ allocation in a real register.
+ This information remains valid for the rest of the compilation
+ of the current function; it is used to control register allocation.
+
+ local-alloc.c may alter this number to change the priority.
+
+ Negative values are special.
+ -1 is used to mark a pseudo reg which has a constant or memory equivalent
+ and is used infrequently enough that it should not get a hard register.
+ -2 is used to mark a pseudo reg for a parameter, when a frame pointer
+ is not required. global-alloc.c makes an allocno for this but does
+ not try to assign a hard register to it. */
+
+int *reg_live_length;
+
+/* Element N is the next insn that uses (hard or pseudo) register number N
+ within the current basic block; or zero, if there is no such insn.
+ This is valid only during the final backward scan in propagate_block. */
+
+static rtx *reg_next_use;
+
+/* Size of a regset for the current function,
+ in (1) bytes and (2) elements. */
+
+int regset_bytes;
+int regset_size;
+
+/* Element N is first insn in basic block N.
+ This info lasts until we finish compiling the function. */
+
+rtx *basic_block_head;
+
+/* Element N is last insn in basic block N.
+ This info lasts until we finish compiling the function. */
+
+rtx *basic_block_end;
+
+/* Element N is a regset describing the registers live
+ at the start of basic block N.
+ This info lasts until we finish compiling the function. */
+
+regset *basic_block_live_at_start;
+
+/* Regset of regs live when calls to `setjmp'-like functions happen. */
+
+regset regs_live_at_setjmp;
+
+/* Element N is nonzero if control can drop into basic block N
+ from the preceding basic block. Freed after life_analysis. */
+
+static char *basic_block_drops_in;
+
+/* Element N is depth within loops of basic block number N.
+ Freed after life_analysis. */
+
+static short *basic_block_loop_depth;
+
+/* Element N nonzero if basic block N can actually be reached.
+ Vector exists only during find_basic_blocks. */
+
+static char *block_live_static;
+
+/* Depth within loops of basic block being scanned for lifetime analysis,
+ plus one. This is the weight attached to references to registers. */
+
+static int loop_depth;
+\f
+/* Define AUTO_INC_DEC if machine has any kind of incrementing
+ or decrementing addressing. */
+
+#ifdef HAVE_PRE_DECREMENT
+#define AUTO_INC_DEC
+#endif
+
+#ifdef HAVE_PRE_INCREMENT
+#define AUTO_INC_DEC
+#endif
+
+#ifdef HAVE_POST_DECREMENT
+#define AUTO_INC_DEC
+#endif
+
+#ifdef HAVE_POST_INCREMENT
+#define AUTO_INC_DEC
+#endif
+
+/* Forward declarations */
+static void find_basic_blocks ();
+static void life_analysis ();
+static void mark_label_ref ();
+void allocate_for_life_analysis (); /* Used also in stupid_life_analysis */
+static void init_regset_vector ();
+static void propagate_block ();
+static void mark_set_regs ();
+static void mark_used_regs ();
+static int insn_dead_p ();
+static int libcall_dead_p ();
+static int try_pre_increment ();
+static int try_pre_increment_1 ();
+static rtx find_use_as_address ();
+void dump_flow_info ();
+\f
+/* Find basic blocks of the current function and perform data flow analysis.
+ F is the first insn of the function and NREGS the number of register numbers
+ in use. */
+
+void
+flow_analysis (f, nregs, file)
+ rtx f;
+ int nregs;
+ FILE *file;
+{
+ register rtx insn;
+ register int i;
+ register int max_uid = 0;
+
+ /* Count the basic blocks. Also find maximum insn uid value used. */
+
+ {
+ register RTX_CODE prev_code = JUMP_INSN;
+ register RTX_CODE code;
+
+ for (insn = f, i = 0; insn; insn = NEXT_INSN (insn))
+ {
+ code = GET_CODE (insn);
+ if (INSN_UID (insn) > max_uid)
+ max_uid = INSN_UID (insn);
+ if (code == CODE_LABEL
+ || (prev_code != INSN && prev_code != CALL_INSN
+ && prev_code != CODE_LABEL
+ && (code == INSN || code == CALL_INSN || code == JUMP_INSN)))
+ i++;
+ if (code != NOTE)
+ prev_code = code;
+ }
+ }
+
+ /* Allocate some tables that last till end of compiling this function
+ and some needed only in find_basic_blocks and life_analysis. */
+
+ n_basic_blocks = i;
+ basic_block_head = (rtx *) oballoc (n_basic_blocks * sizeof (rtx));
+ basic_block_end = (rtx *) oballoc (n_basic_blocks * sizeof (rtx));
+ basic_block_drops_in = (char *) alloca (n_basic_blocks);
+ basic_block_loop_depth = (short *) alloca (n_basic_blocks * sizeof (short));
+ uid_block_number = (short *) alloca ((max_uid + 1) * sizeof (short));
+ uid_volatile = (char *) alloca (max_uid + 1);
+ bzero (uid_volatile, max_uid + 1);
+
+ find_basic_blocks (f);
+ life_analysis (f, nregs);
+ if (file)
+ dump_flow_info (file);
+
+ basic_block_drops_in = 0;
+ uid_block_number = 0;
+ basic_block_loop_depth = 0;
+}
+\f
+/* Find all basic blocks of the function whose first insn is F.
+ Store the correct data in the tables that describe the basic blocks,
+ set up the chains of references for each CODE_LABEL, and
+ delete any entire basic blocks that cannot be reached. */
+
+static void
+find_basic_blocks (f)
+ rtx f;
+{
+ register rtx insn;
+ register int i;
+
+ /* Initialize the ref chain of each label to 0. */
+ /* Record where all the blocks start and end and their depth in loops. */
+ /* For each insn, record the block it is in. */
+
+ {
+ register RTX_CODE prev_code = JUMP_INSN;
+ register RTX_CODE code;
+ int depth = 1;
+
+ for (insn = f, i = -1; insn; insn = NEXT_INSN (insn))
+ {
+ code = GET_CODE (insn);
+ if (code == NOTE)
+ {
+ if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_BEG)
+ depth++;
+ else if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_END)
+ depth--;
+ }
+ else if (code == CODE_LABEL
+ || (prev_code != INSN && prev_code != CALL_INSN
+ && prev_code != CODE_LABEL
+ && (code == INSN || code == CALL_INSN || code == JUMP_INSN)))
+ {
+ basic_block_head[++i] = insn;
+ basic_block_end[i] = insn;
+ basic_block_loop_depth[i] = depth;
+ if (code == CODE_LABEL)
+ LABEL_REFS (insn) = insn;
+ }
+ else if (code == INSN || code == CALL_INSN || code == JUMP_INSN)
+ basic_block_end[i] = insn;
+ BLOCK_NUM (insn) = i;
+ if (code != NOTE)
+ prev_code = code;
+ }
+ if (i + 1 != n_basic_blocks)
+ abort ();
+ }
+
+ /* Record which basic blocks control can drop in to. */
+
+ {
+ register int i;
+ for (i = 0; i < n_basic_blocks; i++)
+ {
+ register rtx insn = PREV_INSN (basic_block_head[i]);
+ /* TEMP1 is used to avoid a bug in Sequent's compiler. */
+ register int temp1;
+ while (insn && GET_CODE (insn) == NOTE)
+ insn = PREV_INSN (insn);
+ temp1 = insn && GET_CODE (insn) != BARRIER;
+ basic_block_drops_in[i] = temp1;
+ }
+ }
+
+ /* Now find which basic blocks can actually be reached
+ and put all jump insns' LABEL_REFS onto the ref-chains
+ of their target labels. */
+
+ if (n_basic_blocks > 0)
+ {
+ register char *block_live = (char *) alloca (n_basic_blocks);
+ register char *block_marked = (char *) alloca (n_basic_blocks);
+ int something_marked = 1;
+
+ /* Initialize with just block 0 reachable and no blocks marked. */
+
+ bzero (block_live, n_basic_blocks);
+ bzero (block_marked, n_basic_blocks);
+ block_live[0] = 1;
+ block_live_static = block_live;
+
+ /* Pass over all blocks, marking each block that is reachable
+ and has not yet been marked.
+ Keep doing this until, in one pass, no blocks have been marked.
+ Then blocks_live and blocks_marked are identical and correct.
+ In addition, all jumps actually reachable have been marked. */
+
+ while (something_marked)
+ {
+ something_marked = 0;
+ for (i = 0; i < n_basic_blocks; i++)
+ if (block_live[i] && !block_marked[i])
+ {
+ block_marked[i] = 1;
+ something_marked = 1;
+ if (i + 1 < n_basic_blocks && basic_block_drops_in[i + 1])
+ block_live[i + 1] = 1;
+ insn = basic_block_end[i];
+ if (GET_CODE (insn) == JUMP_INSN)
+ mark_label_ref (PATTERN (insn), insn, 0);
+ }
+ }
+
+ /* Now delete the code for any basic blocks that can't be reached.
+ They can occur because jump_optimize does not recognize
+ unreachable loops as unreachable. */
+
+ for (i = 0; i < n_basic_blocks; i++)
+ if (!block_live[i])
+ {
+ insn = basic_block_head[i];
+ while (1)
+ {
+ if (GET_CODE (insn) == BARRIER)
+ abort ();
+ if (GET_CODE (insn) != NOTE)
+ {
+ PUT_CODE (insn, NOTE);
+ NOTE_LINE_NUMBER (insn) = NOTE_INSN_DELETED;
+ NOTE_SOURCE_FILE (insn) = 0;
+ }
+ if (insn == basic_block_end[i])
+ {
+ /* BARRIERs are between basic blocks, not part of one.
+ Delete a BARRIER if the preceding jump is deleted.
+ We cannot alter a BARRIER into a NOTE
+ because it is too short; but we can really delete
+ it because it is not part of a basic block. */
+ if (NEXT_INSN (insn) != 0
+ && GET_CODE (NEXT_INSN (insn)) == BARRIER)
+ delete_insn (NEXT_INSN (insn));
+ break;
+ }
+ insn = NEXT_INSN (insn);
+ }
+ /* Each time we delete some basic blocks,
+ see if there is a jump around them that is
+ being turned into a no-op. If so, delete it. */
+
+ if (block_live[i - 1])
+ {
+ register int j;
+ for (j = i; j < n_basic_blocks; j++)
+ if (block_live[j])
+ {
+ rtx label;
+ insn = basic_block_end[i - 1];
+ if (GET_CODE (insn) == JUMP_INSN
+ /* An unconditional jump is the only possibility
+ we must check for, since a conditional one
+ would make these blocks live. */
+ && simplejump_p (insn)
+ && (label = XEXP (SET_SRC (PATTERN (insn)), 0), 1)
+ && INSN_UID (label) != 0
+ && BLOCK_NUM (label) == j)
+ {
+ PUT_CODE (insn, NOTE);
+ NOTE_LINE_NUMBER (insn) = NOTE_INSN_DELETED;
+ NOTE_SOURCE_FILE (insn) = 0;
+ if (GET_CODE (NEXT_INSN (insn)) != BARRIER)
+ abort ();
+ delete_insn (NEXT_INSN (insn));
+ }
+ break;
+ }
+ }
+ }
+ }
+}
+\f
+/* Check expression X for label references;
+ if one is found, add INSN to the label's chain of references.
+
+ CHECKDUP means check for and avoid creating duplicate references
+ from the same insn. Such duplicates do no serious harm but
+ can slow life analysis. CHECKDUP is set only when duplicates
+ are likely. */
+
+static void
+mark_label_ref (x, insn, checkdup)
+ rtx x, insn;
+ int checkdup;
+{
+ register RTX_CODE code = GET_CODE (x);
+ register int i;
+ register char *fmt;
+
+ if (code == LABEL_REF)
+ {
+ register rtx label = XEXP (x, 0);
+ register rtx y;
+ if (GET_CODE (label) != CODE_LABEL)
+ abort ();
+ /* If the label was never emitted, this insn is junk,
+ but avoid a crash trying to refer to BLOCK_NUM (label).
+ This can happen as a result of a syntax error
+ and a diagnostic has already been printed. */
+ if (INSN_UID (label) == 0)
+ return;
+ CONTAINING_INSN (x) = insn;
+ /* if CHECKDUP is set, check for duplicate ref from same insn
+ and don't insert. */
+ if (checkdup)
+ for (y = LABEL_REFS (label); y != label; y = LABEL_NEXTREF (y))
+ if (CONTAINING_INSN (y) == insn)
+ return;
+ LABEL_NEXTREF (x) = LABEL_REFS (label);
+ LABEL_REFS (label) = x;
+ block_live_static[BLOCK_NUM (label)] = 1;
+ return;
+ }
+
+ fmt = GET_RTX_FORMAT (code);
+ for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
+ {
+ if (fmt[i] == 'e')
+ mark_label_ref (XEXP (x, i), insn, 0);
+ if (fmt[i] == 'E')
+ {
+ register int j;
+ for (j = 0; j < XVECLEN (x, i); j++)
+ mark_label_ref (XVECEXP (x, i, j), insn, 1);
+ }
+ }
+}
+\f
+/* Determine the which registers are live at the start of each
+ basic block of the function whose first insn is F.
+ NREGS is the number of registers used in F.
+ We allocate the vector basic_block_live_at_start
+ and the regsets that it points to, and fill them with the data.
+ regset_size and regset_bytes are also set here. */
+
+static void
+life_analysis (f, nregs)
+ rtx f;
+ int nregs;
+{
+ register regset tem;
+ int first_pass;
+ int changed;
+ /* For each basic block, a bitmask of regs
+ live on exit from the block. */
+ regset *basic_block_live_at_end;
+ /* For each basic block, a bitmask of regs
+ live on entry to a successor-block of this block.
+ If this does not match basic_block_live_at_end,
+ that must be updated, and the block must be rescanned. */
+ regset *basic_block_new_live_at_end;
+ /* For each basic block, a bitmask of regs
+ whose liveness at the end of the basic block
+ can make a difference in which regs are live on entry to the block.
+ These are the regs that are set within the basic block,
+ possibly excluding those that are used after they are set. */
+ regset *basic_block_significant;
+ register int i;
+ rtx insn;
+
+ struct obstack flow_obstack;
+
+ obstack_init (&flow_obstack);
+
+ max_regno = nregs;
+
+ bzero (regs_ever_live, sizeof regs_ever_live);
+
+ /* Allocate and zero out many data structures
+ that will record the data from lifetime analysis. */
+
+ allocate_for_life_analysis ();
+
+ reg_next_use = (rtx *) alloca (nregs * sizeof (rtx));
+ bzero (reg_next_use, nregs * sizeof (rtx));
+
+ /* Set up several regset-vectors used internally within this function.
+ Their meanings are documented above, with their declarations. */
+
+ basic_block_live_at_end = (regset *) alloca (n_basic_blocks * sizeof (regset));
+ /* Don't use alloca since that leads to a crash rather than an error message
+ if there isn't enough space.
+ Don't use oballoc since we may need to allocate other things during
+ this function on the temporary obstack. */
+ tem = (regset) obstack_alloc (&flow_obstack, n_basic_blocks * regset_bytes);
+ bzero (tem, n_basic_blocks * regset_bytes);
+ init_regset_vector (basic_block_live_at_end, tem, n_basic_blocks, regset_bytes);
+
+ basic_block_new_live_at_end = (regset *) alloca (n_basic_blocks * sizeof (regset));
+ tem = (regset) obstack_alloc (&flow_obstack, n_basic_blocks * regset_bytes);
+ bzero (tem, n_basic_blocks * regset_bytes);
+ init_regset_vector (basic_block_new_live_at_end, tem, n_basic_blocks, regset_bytes);
+
+ basic_block_significant = (regset *) alloca (n_basic_blocks * sizeof (regset));
+ tem = (regset) obstack_alloc (&flow_obstack, n_basic_blocks * regset_bytes);
+ bzero (tem, n_basic_blocks * regset_bytes);
+ init_regset_vector (basic_block_significant, tem, n_basic_blocks, regset_bytes);
+
+ /* Record which insns refer to any volatile memory
+ or for any reason can't be deleted just because they are dead stores.
+ Also, delete any insns that copy a register to itself. */
+
+ for (insn = f; insn; insn = NEXT_INSN (insn))
+ {
+ enum rtx_code code1 = GET_CODE (insn);
+ if (code1 == CALL_INSN)
+ INSN_VOLATILE (insn) = 1;
+ else if (code1 == INSN || code1 == JUMP_INSN)
+ {
+ if (GET_CODE (PATTERN (insn)) == SET
+ && GET_CODE (SET_DEST (PATTERN (insn))) == REG
+ && GET_CODE (SET_SRC (PATTERN (insn))) == REG
+ && REGNO (SET_DEST (PATTERN (insn))) ==
+ REGNO (SET_SRC (PATTERN (insn))))
+ {
+ PUT_CODE (insn, NOTE);
+ NOTE_LINE_NUMBER (insn) = NOTE_INSN_DELETED;
+ NOTE_SOURCE_FILE (insn) = 0;
+ }
+ else if (GET_CODE (PATTERN (insn)) != USE)
+ INSN_VOLATILE (insn) = volatile_refs_p (PATTERN (insn));
+ /* A SET that makes space on the stack cannot be dead.
+ (Such SETs occur only for allocating variable-size data,
+ so they will always have a PLUS or MINUS according to the
+ direction of stack growth.)
+ Even if this function never uses this stack pointer value,
+ signal handlers do! */
+ else if (code1 == INSN && GET_CODE (PATTERN (insn)) == SET
+ && SET_DEST (PATTERN (insn)) == stack_pointer_rtx
+#ifdef STACK_GROWS_DOWNWARD
+ && GET_CODE (SET_SRC (PATTERN (insn))) == MINUS
+#else
+ && GET_CODE (SET_SRC (PATTERN (insn))) == PLUS
+#endif
+ && XEXP (SET_SRC (PATTERN (insn)), 0) == stack_pointer_rtx)
+ INSN_VOLATILE (insn) = 1;
+ }
+ }
+
+ if (n_basic_blocks > 0)
+#ifdef EXIT_IGNORE_STACK
+ if (! (EXIT_IGNORE_STACK) || ! frame_pointer_needed)
+#endif
+ {
+ /* If exiting needs the right stack value,
+ consider the stack pointer live at the end of the function. */
+ basic_block_live_at_end[n_basic_blocks - 1]
+ [STACK_POINTER_REGNUM / REGSET_ELT_BITS]
+ |= 1 << (STACK_POINTER_REGNUM % REGSET_ELT_BITS);
+ basic_block_new_live_at_end[n_basic_blocks - 1]
+ [STACK_POINTER_REGNUM / REGSET_ELT_BITS]
+ |= 1 << (STACK_POINTER_REGNUM % REGSET_ELT_BITS);
+ }
+
+ /* Propagate life info through the basic blocks
+ around the graph of basic blocks.
+
+ This is a relaxation process: each time a new register
+ is live at the end of the basic block, we must scan the block
+ to determine which registers are, as a consequence, live at the beginning
+ of that block. These registers must then be marked live at the ends
+ of all the blocks that can transfer control to that block.
+ The process continues until it reaches a fixed point. */
+
+ first_pass = 1;
+ changed = 1;
+ while (changed)
+ {
+ changed = 0;
+ for (i = n_basic_blocks - 1; i >= 0; i--)
+ {
+ int consider = first_pass;
+ int must_rescan = first_pass;
+ register int j;
+
+ /* Set CONSIDER if this block needs thinking about at all
+ (that is, if the regs live now at the end of it
+ are not the same as were live at the end of it when
+ we last thought about it).
+ Set must_rescan if it needs to be thought about
+ instruction by instruction (that is, if any additional
+ reg that is live at the end now but was not live there before
+ is one of the significant regs of this basic block). */
+
+ for (j = 0; j < regset_size; j++)
+ {
+ register int x = basic_block_new_live_at_end[i][j]
+ & ~basic_block_live_at_end[i][j];
+ if (x)
+ consider = 1;
+ if (x & basic_block_significant[i][j])
+ {
+ must_rescan = 1;
+ consider = 1;
+ break;
+ }
+ }
+
+ if (! consider)
+ continue;
+
+ /* The live_at_start of this block may be changing,
+ so another pass will be required after this one. */
+ changed = 1;
+
+ if (! must_rescan)
+ {
+ /* No complete rescan needed;
+ just record those variables newly known live at end
+ as live at start as well. */
+ for (j = 0; j < regset_size; j++)
+ {
+ register int x = basic_block_new_live_at_end[i][j]
+ & ~basic_block_live_at_end[i][j];
+ basic_block_live_at_start[i][j] |= x;
+ basic_block_live_at_end[i][j] |= x;
+ }
+ }
+ else
+ {
+ /* Update the basic_block_live_at_start
+ by propagation backwards through the block. */
+ bcopy (basic_block_new_live_at_end[i],
+ basic_block_live_at_end[i], regset_bytes);
+ bcopy (basic_block_live_at_end[i],
+ basic_block_live_at_start[i], regset_bytes);
+ propagate_block (basic_block_live_at_start[i],
+ basic_block_head[i], basic_block_end[i], 0,
+ first_pass ? basic_block_significant[i] : 0,
+ i);
+ }
+
+ {
+ register rtx jump, head;
+ /* Update the basic_block_new_live_at_end's of the block
+ that falls through into this one (if any). */
+ head = basic_block_head[i];
+ jump = PREV_INSN (head);
+ if (basic_block_drops_in[i])
+ {
+ register int from_block = BLOCK_NUM (jump);
+ register int j;
+ for (j = 0; j < regset_size; j++)
+ basic_block_new_live_at_end[from_block][j]
+ |= basic_block_live_at_start[i][j];
+ }
+ /* Update the basic_block_new_live_at_end's of
+ all the blocks that jump to this one. */
+ if (GET_CODE (head) == CODE_LABEL)
+ for (jump = LABEL_REFS (head);
+ jump != head;
+ jump = LABEL_NEXTREF (jump))
+ {
+ register int from_block = BLOCK_NUM (CONTAINING_INSN (jump));
+ register int j;
+ for (j = 0; j < regset_size; j++)
+ basic_block_new_live_at_end[from_block][j]
+ |= basic_block_live_at_start[i][j];
+ }
+ }
+#ifdef USE_C_ALLOCA
+ alloca (0);
+#endif
+ }
+ first_pass = 0;
+ }
+
+#if 0 /* This seems unnecessary; life at start of function shouldn't
+ mean that the reg is live in more than one basic block. */
+
+ /* Process the regs live at the beginning of the function.
+ Mark them as not local to any one basic block. */
+
+ if (n_basic_blocks > 0)
+ for (i = FIRST_PSEUDO_REGISTER; i < max_regno; i++)
+ if (basic_block_live_at_start[0][i / REGSET_ELT_BITS]
+ & (1 << (i % REGSET_ELT_BITS)))
+ reg_basic_block[i] = REG_BLOCK_GLOBAL;
+#endif
+
+ /* Now the life information is accurate.
+ Make one more pass over each basic block
+ to delete dead stores, create autoincrement addressing
+ and record how many times each register is used, is set, or dies.
+
+ To save time, we operate directly in basic_block_live_at_end[i],
+ thus destroying it (in fact, converting it into a copy of
+ basic_block_live_at_start[i]). This is ok now because
+ basic_block_live_at_end[i] is no longer used past this point. */
+
+ for (i = 0; i < n_basic_blocks; i++)
+ {
+ propagate_block (basic_block_live_at_end[i],
+ basic_block_head[i], basic_block_end[i], 1, 0, i);
+#ifdef USE_C_ALLOCA
+ alloca (0);
+#endif
+ }
+
+#if 0
+ /* Something live during a setjmp should not be put in a register
+ on certain machines which restore regs from stack frames
+ rather than from the jmpbuf.
+ But we don't need to do this for the user's variables, since
+ ANSI says only volatile variables need this. */
+#ifdef LONGJMP_RESTORE_FROM_STACK
+ for (i = FIRST_PSEUDO_REGISTER; i < nregs; i++)
+ if (regs_live_at_setjmp[i / REGSET_ELT_BITS] & (1 << (i % REGSET_ELT_BITS))
+ && regno_reg_rtx[i] != 0 && ! REG_USERVAR_P (regno_reg_rtx[i]))
+ {
+ reg_live_length[i] = -1;
+ reg_basic_block[i] = -1;
+ }
+#endif
+#endif
+
+ /* We have a problem with any pseudoreg that
+ lives across the setjmp. ANSI says that if a
+ user variable does not change in value
+ between the setjmp and the longjmp, then the longjmp preserves it.
+ This includes longjmp from a place where the pseudo appears dead.
+ (In principle, the value still exists if it is in scope.)
+ If the pseudo goes in a hard reg, some other value may occupy
+ that hard reg where this pseudo is dead, thus clobbering the pseudo.
+ Conclusion: such a pseudo must not go in a hard reg. */
+ for (i = FIRST_PSEUDO_REGISTER; i < nregs; i++)
+ if (regs_live_at_setjmp[i / REGSET_ELT_BITS] & (1 << (i % REGSET_ELT_BITS))
+ && regno_reg_rtx[i] != 0)
+ {
+ reg_live_length[i] = -1;
+ reg_basic_block[i] = -1;
+ }
+
+ obstack_free (&flow_obstack, 0);
+}
+\f
+/* Subroutines of life analysis. */
+
+/* Allocate the permanent data structures that represent the results
+ of life analysis. Not static since used also for stupid life analysis. */
+
+void
+allocate_for_life_analysis ()
+{
+ register int i;
+ register regset tem;
+
+ regset_size = ((max_regno + REGSET_ELT_BITS - 1) / REGSET_ELT_BITS);
+ regset_bytes = regset_size * sizeof (*(regset)0);
+
+ reg_n_refs = (short *) oballoc (max_regno * sizeof (short));
+ bzero (reg_n_refs, max_regno * sizeof (short));
+
+ reg_n_sets = (short *) oballoc (max_regno * sizeof (short));
+ bzero (reg_n_sets, max_regno * sizeof (short));
+
+ reg_n_deaths = (short *) oballoc (max_regno * sizeof (short));
+ bzero (reg_n_deaths, max_regno * sizeof (short));
+
+ reg_first_use = (rtx *) oballoc (max_regno * sizeof (rtx));
+ bzero (reg_first_use, max_regno * sizeof (rtx));
+
+ reg_live_length = (int *) oballoc (max_regno * sizeof (int));
+ bzero (reg_live_length, max_regno * sizeof (int));
+
+ reg_n_calls_crossed = (int *) oballoc (max_regno * sizeof (int));
+ bzero (reg_n_calls_crossed, max_regno * sizeof (int));
+
+ reg_basic_block = (short *) oballoc (max_regno * sizeof (short));
+ for (i = 0; i < max_regno; i++)
+ reg_basic_block[i] = REG_BLOCK_UNKNOWN;
+
+ basic_block_live_at_start = (regset *) oballoc (n_basic_blocks * sizeof (regset));
+ tem = (regset) oballoc (n_basic_blocks * regset_bytes);
+ bzero (tem, n_basic_blocks * regset_bytes);
+ init_regset_vector (basic_block_live_at_start, tem, n_basic_blocks, regset_bytes);
+
+ regs_live_at_setjmp = (regset) oballoc (regset_bytes);
+ bzero (regs_live_at_setjmp, regset_bytes);
+}
+
+/* Make each element of VECTOR point at a regset,
+ taking the space for all those regsets from SPACE.
+ SPACE is of type regset, but it is really as long as NELTS regsets.
+ BYTES_PER_ELT is the number of bytes in one regset. */
+
+static void
+init_regset_vector (vector, space, nelts, bytes_per_elt)
+ regset *vector;
+ regset space;
+ int nelts;
+ int bytes_per_elt;
+{
+ register int i;
+ register regset p = space;
+
+ for (i = 0; i < nelts; i++)
+ {
+ vector[i] = p;
+ p += bytes_per_elt / sizeof (*p);
+ }
+}
+\f
+/* Compute the registers live at the beginning of a basic block
+ from those live at the end.
+
+ When called, OLD contains those live at the end.
+ On return, it contains those live at the beginning.
+ FIRST and LAST are the first and last insns of the basic block.
+
+ FINAL is nonzero if we are doing the final pass which is not
+ for computing the life info (since that has already been done)
+ but for acting on it. On this pass, we delete dead stores,
+ set up the logical links and dead-variables lists of instructions,
+ and merge instructions for autoincrement and autodecrement addresses.
+
+ SIGNIFICANT is nonzero only the first time for each basic block.
+ If it is nonzero, it points to a regset in which we store
+ a 1 for each register that is set within the block.
+
+ BNUM is the number of the basic block. */
+
+static void
+propagate_block (old, first, last, final, significant, bnum)
+ register regset old;
+ rtx first;
+ rtx last;
+ int final;
+ regset significant;
+ int bnum;
+{
+ register rtx insn;
+ rtx prev;
+ regset live;
+ regset dead;
+
+ /* The following variables are used only if FINAL is nonzero. */
+ /* This vector gets one element for each reg that has been live
+ at any point in the basic block that has been scanned so far.
+ SOMETIMES_MAX says how many elements are in use so far.
+ In each element, OFFSET is the byte-number within a regset
+ for the register described by the element, and BIT is a mask
+ for that register's bit within the byte. */
+ register struct foo { short offset; short bit; } *regs_sometimes_live;
+ int sometimes_max = 0;
+ /* This regset has 1 for each reg that we have seen live so far.
+ It and REGS_SOMETIMES_LIVE are updated together. */
+ regset maxlive;
+
+ loop_depth = basic_block_loop_depth[bnum];
+
+ dead = (regset) alloca (regset_bytes);
+ live = (regset) alloca (regset_bytes);
+
+ if (final)
+ {
+ register int i, offset, bit;
+
+ maxlive = (regset) alloca (regset_bytes);
+ bcopy (old, maxlive, regset_bytes);
+ regs_sometimes_live
+ = (struct foo *) alloca (max_regno * sizeof (struct foo));
+
+ /* Process the regs live at the end of the block.
+ Enter them in MAXLIVE and REGS_SOMETIMES_LIVE.
+ Also mark them as not local to any one basic block. */
+
+ for (offset = 0, i = 0; offset < regset_size; offset++)
+ for (bit = 1; bit; bit <<= 1, i++)
+ {
+ if (i == max_regno)
+ break;
+ if (old[offset] & bit)
+ {
+ reg_basic_block[i] = REG_BLOCK_GLOBAL;
+ regs_sometimes_live[sometimes_max].offset = offset;
+ regs_sometimes_live[sometimes_max].bit = i % REGSET_ELT_BITS;
+ sometimes_max++;
+ }
+ }
+ }
+
+ /* Include any notes at the end of the block in the scan.
+ This is in case the block ends with a call to setjmp. */
+
+ while (NEXT_INSN (last) != 0 && GET_CODE (NEXT_INSN (last)) == NOTE)
+ last = NEXT_INSN (last);
+
+ /* Scan the block an insn at a time from end to beginning. */
+
+ for (insn = last; ; insn = prev)
+ {
+ prev = PREV_INSN (insn);
+
+ /* If this is a call to `setjmp' et al,
+ warn if any non-volatile datum is live. */
+
+ if (final && GET_CODE (insn) == NOTE
+ && NOTE_LINE_NUMBER (insn) == NOTE_INSN_SETJMP)
+ {
+ int i;
+ for (i = 0; i < regset_size; i++)
+ regs_live_at_setjmp[i] |= old[i];
+ }
+
+ /* Update the life-status of regs for this insn.
+ First DEAD gets which regs are set in this insn
+ then LIVE gets which regs are used in this insn.
+ Then the regs live before the insn
+ are those live after, with DEAD regs turned off,
+ and then LIVE regs turned on. */
+
+ if (GET_CODE (insn) == INSN
+ || GET_CODE (insn) == JUMP_INSN
+ || GET_CODE (insn) == CALL_INSN)
+ {
+ register int i;
+ rtx note = find_reg_note (insn, REG_RETVAL, 0);
+
+ /* If an instruction consists of just dead store(s) on final pass,
+ "delete" it by turning it into a NOTE of type NOTE_INSN_DELETED.
+ We could really delete it with delete_insn, but that
+ can cause trouble for first or last insn in a basic block. */
+ if (final && insn_dead_p (PATTERN (insn), old, 1)
+ /* Don't delete something that refers to volatile storage! */
+ && ! INSN_VOLATILE (insn))
+ {
+ rtx oldpat = PATTERN (insn);
+ PUT_CODE (insn, NOTE);
+ NOTE_LINE_NUMBER (insn) = NOTE_INSN_DELETED;
+ NOTE_SOURCE_FILE (insn) = 0;
+ /* If this insn is copying the return value from a library call,
+ delete the entire library call. */
+ if (note && libcall_dead_p (oldpat, old))
+ {
+ rtx first = XEXP (note, 0);
+ rtx prev = insn;
+ while (INSN_DELETED_P (first))
+ first = NEXT_INSN (first);
+ while (prev != first)
+ {
+ prev = PREV_INSN (prev);
+ PUT_CODE (prev, NOTE);
+ NOTE_LINE_NUMBER (prev) = NOTE_INSN_DELETED;
+ NOTE_SOURCE_FILE (prev) = 0;
+ }
+ }
+ goto flushed;
+ }
+
+ for (i = 0; i < regset_size; i++)
+ {
+ dead[i] = 0; /* Faster than bzero here */
+ live[i] = 0; /* since regset_size is usually small */
+ }
+
+ /* See if this is an increment or decrement that can be
+ merged into a following memory address. */
+#ifdef AUTO_INC_DEC
+ {
+ register rtx x = PATTERN (insn);
+ /* Does this instruction increment or decrement a register? */
+ if (final && GET_CODE (x) == SET
+ && GET_CODE (SET_DEST (x)) == REG
+ && (GET_CODE (SET_SRC (x)) == PLUS
+ || GET_CODE (SET_SRC (x)) == MINUS)
+ && XEXP (SET_SRC (x), 0) == SET_DEST (x)
+ && GET_CODE (XEXP (SET_SRC (x), 1)) == CONST_INT
+ /* Ok, look for a following memory ref we can combine with.
+ If one is found, change the memory ref to a PRE_INC
+ or PRE_DEC, cancel this insn, and return 1.
+ Return 0 if nothing has been done. */
+ && try_pre_increment_1 (insn))
+ goto flushed;
+ }
+#endif /* AUTO_INC_DEC */
+
+ /* If this is not the final pass, and this insn is copying the
+ value of a library call and it's dead, don't scan the
+ insns that perform the library call, so that the call's
+ arguments are not marked live. */
+ if (note && insn_dead_p (PATTERN (insn), old, 1)
+ && libcall_dead_p (PATTERN (insn), old))
+ {
+ /* Mark the dest reg as `significant'. */
+ mark_set_regs (old, dead, PATTERN (insn), 0, significant);
+
+ insn = XEXP (note, 0);
+ prev = PREV_INSN (insn);
+ }
+ else if (GET_CODE (PATTERN (insn)) == SET
+ && SET_DEST (PATTERN (insn)) == stack_pointer_rtx
+ && GET_CODE (SET_SRC (PATTERN (insn))) == PLUS
+ && XEXP (SET_SRC (PATTERN (insn)), 0) == stack_pointer_rtx
+ && GET_CODE (XEXP (SET_SRC (PATTERN (insn)), 1)) == CONST_INT)
+ /* We have an insn to pop a constant amount off the stack.
+ (Such insns use PLUS regardless of the direction of the stack,
+ and any insn to adjust the stack by a constant is always a pop.)
+ These insns, if not dead stores, have no effect on life. */
+ ;
+ else
+ {
+ /* LIVE gets the regs used in INSN; DEAD gets those set by it. */
+ mark_set_regs (old, dead, PATTERN (insn), final ? insn : 0,
+ significant);
+ mark_used_regs (old, live, PATTERN (insn), final, insn);
+
+ /* Update OLD for the registers used or set. */
+ for (i = 0; i < regset_size; i++)
+ {
+ old[i] &= ~dead[i];
+ old[i] |= live[i];
+ }
+
+ if (GET_CODE (insn) == CALL_INSN)
+ {
+ register int i;
+
+ /* Each call clobbers all call-clobbered regs.
+ Note that the function-value reg is one of these, and
+ mark_set_regs has already had a chance to handle it. */
+ for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
+ if (call_used_regs[i])
+ dead[i / REGSET_ELT_BITS] |=
+ (1 << (i % REGSET_ELT_BITS));
+
+ /* The stack ptr is used (honorarily) by a CALL insn. */
+ live[STACK_POINTER_REGNUM / REGSET_ELT_BITS]
+ |= (1 << (STACK_POINTER_REGNUM % REGSET_ELT_BITS));
+ }
+
+ /* Update OLD for the registers used or set. */
+ for (i = 0; i < regset_size; i++)
+ {
+ old[i] &= ~dead[i];
+ old[i] |= live[i];
+ }
+
+ if (GET_CODE (insn) == CALL_INSN && final)
+ {
+ /* Any regs live at the time of a call instruction
+ must not go in a register clobbered by calls.
+ Find all regs now live and record this for them. */
+
+ register struct foo *p = regs_sometimes_live;
+
+ for (i = 0; i < sometimes_max; i++, p++)
+ if (old[p->offset] & (1 << p->bit))
+ reg_n_calls_crossed[p->offset * REGSET_ELT_BITS + p->bit]+= 1;
+ }
+ }
+
+ /* On final pass, add any additional sometimes-live regs
+ into MAXLIVE and REGS_SOMETIMES_LIVE.
+ Also update counts of how many insns each reg is live at. */
+
+ if (final)
+ {
+ for (i = 0; i < regset_size; i++)
+ {
+ register int diff = live[i] & ~maxlive[i];
+
+ if (diff)
+ {
+ register int regno;
+ maxlive[i] |= diff;
+ for (regno = 0; diff && regno < REGSET_ELT_BITS; regno++)
+ if (diff & (1 << regno))
+ {
+ regs_sometimes_live[sometimes_max].offset = i;
+ regs_sometimes_live[sometimes_max].bit = regno;
+ diff &= ~ (1 << regno);
+ sometimes_max++;
+ }
+ }
+ }
+
+ {
+ register struct foo *p = regs_sometimes_live;
+ for (i = 0; i < sometimes_max; i++, p++)
+ {
+ if (old[p->offset] & (1 << p->bit))
+ reg_live_length[p->offset * REGSET_ELT_BITS + p->bit]++;
+ }
+ }
+ }
+ }
+ flushed: ;
+ if (insn == first)
+ break;
+ }
+}
+\f
+/* Return 1 if X (the body of an insn, or part of it) is just dead stores
+ (SET expressions whose destinations are registers dead after the insn).
+ NEEDED is the regset that says which regs are alive after the insn. */
+
+static int
+insn_dead_p (x, needed, strict_low_ok)
+ rtx x;
+ regset needed;
+ int strict_low_ok;
+{
+ register RTX_CODE code = GET_CODE (x);
+#if 0
+ /* Make sure insns to set the stack pointer are never deleted. */
+ needed[STACK_POINTER_REGNUM / REGSET_ELT_BITS]
+ |= 1 << (STACK_POINTER_REGNUM % REGSET_ELT_BITS);
+#endif
+
+ /* If setting something that's a reg or part of one,
+ see if that register's altered value will be live. */
+
+ if (code == SET)
+ {
+ register rtx r = SET_DEST (x);
+ /* A SET that is a subroutine call cannot be dead. */
+ if (GET_CODE (SET_SRC (x)) == CALL)
+ return 0;
+ while (GET_CODE (r) == SUBREG
+ || (strict_low_ok && GET_CODE (r) == STRICT_LOW_PART)
+ || GET_CODE (r) == ZERO_EXTRACT
+ || GET_CODE (r) == SIGN_EXTRACT)
+ r = SUBREG_REG (r);
+ if (GET_CODE (r) == REG)
+ {
+ register int regno = REGNO (r);
+ register int offset = regno / REGSET_ELT_BITS;
+ register int bit = 1 << (regno % REGSET_ELT_BITS);
+ return (! (regno < FIRST_PSEUDO_REGISTER && global_regs[regno])
+ && (needed[offset] & bit) == 0);
+ }
+ }
+ /* If performing several activities,
+ insn is dead if each activity is individually dead.
+ Also, CLOBBERs and USEs can be ignored; a CLOBBER or USE
+ that's inside a PARALLEL doesn't make the insn worth keeping. */
+ else if (code == PARALLEL)
+ {
+ register int i = XVECLEN (x, 0);
+ for (i--; i >= 0; i--)
+ {
+ rtx elt = XVECEXP (x, 0, i);
+ if (!insn_dead_p (elt, needed, strict_low_ok)
+ && GET_CODE (elt) != CLOBBER
+ && GET_CODE (elt) != USE)
+ return 0;
+ }
+ return 1;
+ }
+ /* We do not check CLOBBER or USE here.
+ An insn consisting of just a CLOBBER or just a USE
+ should not be deleted. */
+ return 0;
+}
+
+/* If X is the last insn in a libcall, and assuming X is dead,
+ return 1 if the entire library call is dead.
+ This is true if the source of X is a dead register
+ (as well as the destination, which we tested already).
+ If this insn doesn't just copy a register, then we don't
+ have an ordinary libcall. In that case, cse could not have
+ managed to substitute the source for the dest later on,
+ so we can assume the libcall is dead. */
+
+static int
+libcall_dead_p (x, needed)
+ rtx x;
+ regset needed;
+{
+ register RTX_CODE code = GET_CODE (x);
+
+ if (code == SET)
+ {
+ register rtx r = SET_SRC (x);
+ if (GET_CODE (r) == REG)
+ {
+ register int regno = REGNO (r);
+ register int offset = regno / REGSET_ELT_BITS;
+ register int bit = 1 << (regno % REGSET_ELT_BITS);
+ return (needed[offset] & bit) == 0;
+ }
+ }
+ return 1;
+}
+
+/* Return 1 if register REGNO was used before it was set.
+ In other words, if it is live at function entry. */
+
+int
+regno_uninitialized (regno)
+ int regno;
+{
+ if (n_basic_blocks == 0)
+ return 0;
+
+ return (basic_block_live_at_start[0][regno / REGSET_ELT_BITS]
+ & (1 << (regno % REGSET_ELT_BITS)));
+}
+
+/* 1 if register REGNO was alive at a place where `setjmp' was called
+ and was set more than once. Such regs may be clobbered by `longjmp'. */
+
+int
+regno_clobbered_at_setjmp (regno)
+ int regno;
+{
+ return (reg_n_sets[regno] > 1
+ && (regs_live_at_setjmp[regno / REGSET_ELT_BITS]
+ & (1 << (regno % REGSET_ELT_BITS))));
+}
+\f
+/* Process the registers that are set within X.
+ Their bits are set to 1 in the regset DEAD,
+ because they are dead prior to this insn.
+
+ If INSN is nonzero, it is the insn being processed
+ and the fact that it is nonzero implies this is the FINAL pass
+ in propagate_block. In this case, various info about register
+ usage is stored, LOG_LINKS fields of insns are set up. */
+
+static void mark_set_1 ();
+
+static void
+mark_set_regs (needed, dead, x, insn, significant)
+ regset needed;
+ regset dead;
+ rtx x;
+ rtx insn;
+ regset significant;
+{
+ register RTX_CODE code = GET_CODE (x);
+
+ if (code == SET || code == CLOBBER)
+ mark_set_1 (needed, dead, x, insn, significant);
+ else if (code == PARALLEL)
+ {
+ register int i;
+ for (i = XVECLEN (x, 0) - 1; i >= 0; i--)
+ {
+ code = GET_CODE (XVECEXP (x, 0, i));
+ if (code == SET || code == CLOBBER)
+ mark_set_1 (needed, dead, XVECEXP (x, 0, i), insn, significant);
+ }
+ }
+}
+
+/* Process a single SET rtx, X. */
+
+static void
+mark_set_1 (needed, dead, x, insn, significant)
+ regset needed;
+ regset dead;
+ rtx x;
+ rtx insn;
+ regset significant;
+{
+ register int regno;
+ register rtx reg = SET_DEST (x);
+ int subreg_p = 0;
+
+ if (reg == 0)
+ return;
+ /* Modifying just one hardware register of a multi-reg value
+ or just a byte field of a register
+ does not mean the value from before this insn is now dead.
+ But it does mean liveness of that register at the end of the block
+ is significant. */
+ while (GET_CODE (reg) == SUBREG || GET_CODE (reg) == ZERO_EXTRACT
+ || GET_CODE (reg) == SIGN_EXTRACT
+ || GET_CODE (reg) == STRICT_LOW_PART)
+ {
+ if (GET_CODE (reg) == ZERO_EXTRACT
+ || GET_CODE (reg) == SIGN_EXTRACT
+ || (GET_CODE (reg) == SUBREG
+ && REG_SIZE (SUBREG_REG (reg)) > REG_SIZE (reg)))
+ subreg_p = 1;
+
+ reg = XEXP (reg, 0);
+ }
+
+ if (GET_CODE (reg) == REG
+ && (regno = REGNO (reg), regno != FRAME_POINTER_REGNUM)
+ && regno != ARG_POINTER_REGNUM
+ && ! (regno < FIRST_PSEUDO_REGISTER && global_regs[regno]))
+ /* && regno != STACK_POINTER_REGNUM) -- let's try without this. */
+ {
+ register int offset = regno / REGSET_ELT_BITS;
+ register int bit = 1 << (regno % REGSET_ELT_BITS);
+ int is_needed = 0;
+
+ /* Mark it as a significant register for this basic block. */
+ if (significant)
+ significant[offset] |= bit;
+ /* That's all we do, if we are setting only part of the register. */
+ if (subreg_p)
+ return;
+
+ /* If entire register being set, mark it as as dead before this insn. */
+ dead[offset] |= bit;
+ /* A hard reg in a wide mode may really be multiple registers.
+ If so, mark all of them just like the first. */
+ if (regno < FIRST_PSEUDO_REGISTER)
+ {
+ int n;
+
+ /* Nothing below is needed for the stack pointer; get out asap.
+ Eg, log links aren't needed, since combine won't use them. */
+ if (regno == STACK_POINTER_REGNUM)
+ return;
+
+ n = HARD_REGNO_NREGS (regno, GET_MODE (reg));
+ while (--n > 0)
+ {
+ dead[(regno + n) / REGSET_ELT_BITS]
+ |= 1 << ((regno + n) % REGSET_ELT_BITS);
+ if (significant)
+ significant[(regno + n) / REGSET_ELT_BITS]
+ |= 1 << ((regno + n) % REGSET_ELT_BITS);
+ is_needed |= (needed[(regno + n) / REGSET_ELT_BITS]
+ & 1 << ((regno + n) % REGSET_ELT_BITS));
+ }
+ }
+ /* Additional data to record if this is the final pass. */
+ if (insn)
+ {
+ register rtx y = reg_next_use[regno];
+ register int blocknum = BLOCK_NUM (insn);
+
+ /* If this is a hard reg, record this function uses the reg.
+ `combine.c' will get confused if LOG_LINKs are made
+ for hard regs. */
+
+ if (regno < FIRST_PSEUDO_REGISTER)
+ {
+ register int i;
+ i = HARD_REGNO_NREGS (regno, GET_MODE (reg));
+ if (i == 0)
+ i = 1;
+ do
+ regs_ever_live[regno + --i] = 1;
+ while (i > 0);
+
+ if (! ((needed[offset] & bit) || is_needed))
+ {
+ /* Note that dead stores have already been deleted if poss.
+ If we get here, we have found a dead store that cannot
+ be eliminated (because the insn does something useful).
+ Indicate this by marking the reg set as dying here. */
+ REG_NOTES (insn)
+ = gen_rtx (EXPR_LIST, REG_DEAD,
+ reg, REG_NOTES (insn));
+ reg_n_deaths[REGNO (reg)]++;
+ }
+ return;
+ }
+
+ /* Keep track of which basic blocks each reg appears in. */
+
+ if (reg_basic_block[regno] == REG_BLOCK_UNKNOWN)
+ reg_basic_block[regno] = blocknum;
+ else if (reg_basic_block[regno] != blocknum)
+ reg_basic_block[regno] = REG_BLOCK_GLOBAL;
+
+ /* Record first insn to use this reg. */
+ reg_first_use[regno] = insn;
+
+ /* Count (weighted) references, stores, etc. */
+ reg_n_refs[regno] += loop_depth;
+ reg_n_sets[regno]++;
+ /* The next use is no longer "next", since a store intervenes. */
+ reg_next_use[regno] = 0;
+ /* The insns where a reg is live are normally counted elsewhere,
+ but we want the count to include the insn where the reg is set,
+ and the normal counting mechanism would not count it. */
+ reg_live_length[regno]++;
+ if ((needed[offset] & bit) || is_needed)
+ {
+ /* Make a logical link from the next following insn
+ that uses this register, back to this insn.
+ The following insns have already been processed. */
+ if (y && (BLOCK_NUM (y) == blocknum))
+ LOG_LINKS (y)
+ = gen_rtx (INSN_LIST, VOIDmode, insn, LOG_LINKS (y));
+ }
+ else
+ {
+ /* Note that dead stores have already been deleted when possible
+ If we get here, we have found a dead store that cannot
+ be eliminated (because the same insn does something useful).
+ Indicate this by marking the reg being set as dying here. */
+ REG_NOTES (insn)
+ = gen_rtx (EXPR_LIST, REG_DEAD,
+ reg, REG_NOTES (insn));
+ reg_n_deaths[REGNO (reg)]++;
+ }
+ }
+ }
+}
+\f
+/* Scan expression X and store a 1-bit in LIVE for each reg it uses.
+ This is done assuming the registers needed from X
+ are those that have 1-bits in NEEDED.
+
+ On the final pass, FINAL is 1. This means try for autoincrement
+ and count the uses and deaths of each pseudo-reg.
+
+ INSN is the containing instruction. */
+
+static void
+mark_used_regs (needed, live, x, final, insn)
+ regset needed;
+ regset live;
+ rtx x;
+ rtx insn;
+ int final;
+{
+ register RTX_CODE code;
+ register int regno;
+
+ retry:
+ code = GET_CODE (x);
+ switch (code)
+ {
+ case LABEL_REF:
+ case SYMBOL_REF:
+ case CONST_INT:
+ case CONST:
+ case CONST_DOUBLE:
+ case CC0:
+ case PC:
+ case CLOBBER:
+ case ADDR_VEC:
+ case ADDR_DIFF_VEC:
+ case ASM_INPUT:
+ return;
+
+#if defined (HAVE_POST_INCREMENT) || defined (HAVE_POST_DECREMENT)
+ case MEM:
+ /* Here we detect use of an index register which might
+ be good for postincrement or postdecrement. */
+ if (final)
+ {
+ rtx addr = XEXP (x, 0);
+ register int size = GET_MODE_SIZE (GET_MODE (x));
+
+ if (GET_CODE (addr) == REG)
+ {
+ register rtx y;
+ regno = REGNO (addr);
+ /* Is the next use an increment that might make auto-increment? */
+ y = reg_next_use[regno];
+ if (y && GET_CODE (PATTERN (y)) == SET
+ && BLOCK_NUM (y) == BLOCK_NUM (insn)
+ /* Can't add side effects to jumps; if reg is spilled and
+ reloaded, there's no way to store back the altered value. */
+ && GET_CODE (insn) != JUMP_INSN
+ && (y = SET_SRC (PATTERN (y)),
+ (0
+#ifdef HAVE_POST_INCREMENT
+ || GET_CODE (y) == PLUS
+#endif
+#ifdef HAVE_POST_DECREMENT
+ || GET_CODE (y) == MINUS
+#endif
+ )
+ && XEXP (y, 0) == addr
+ && GET_CODE (XEXP (y, 1)) == CONST_INT
+ && INTVAL (XEXP (y, 1)) == size)
+ && dead_or_set_p (reg_next_use[regno], addr))
+ {
+ rtx use = find_use_as_address (PATTERN (insn), addr, 0);
+
+ /* Make sure this register appears only once in this insn. */
+ if (use != 0 && use != (rtx) 1)
+ {
+ /* We have found a suitable auto-increment:
+ do POST_INC around the register here,
+ and patch out the increment instruction that follows. */
+ XEXP (x, 0)
+ = gen_rtx (GET_CODE (y) == PLUS ? POST_INC : POST_DEC,
+ Pmode, addr);
+ /* Record that this insn has an implicit side effect. */
+ REG_NOTES (insn)
+ = gen_rtx (EXPR_LIST, REG_INC, addr, REG_NOTES (insn));
+
+ /* Modify the old increment-insn to simply copy
+ the already-incremented value of our register. */
+ y = reg_next_use[regno];
+ SET_SRC (PATTERN (y)) = addr;
+
+ /* If that makes it a no-op (copying the register
+ into itself) then change it to a simpler no-op
+ so it won't appear to be a "use" and a "set"
+ of this register. */
+ if (SET_DEST (PATTERN (y)) == addr)
+ PATTERN (y) = gen_rtx (USE, VOIDmode, const0_rtx);
+
+ /* Count an extra reference to the reg for the increment.
+ When a reg is incremented.
+ spilling it is worse, so we want to make that
+ less likely. */
+ reg_n_refs[regno] += loop_depth;
+ /* Count the increment as a setting of the register,
+ even though it isn't a SET in rtl. */
+ reg_n_sets[regno]++;
+ }
+ }
+ }
+ }
+ break;
+#endif /* HAVE_POST_INCREMENT or HAVE_POST_DECREMENT */
+
+ case REG:
+ /* See a register other than being set
+ => mark it as needed. */
+
+ regno = REGNO (x);
+ if (regno != FRAME_POINTER_REGNUM)
+ /* && regno != ARG_POINTER_REGNUM) -- and without this. */
+ /* && regno != STACK_POINTER_REGNUM) -- let's try without this. */
+ {
+ register int offset = regno / REGSET_ELT_BITS;
+ register int bit = 1 << (regno % REGSET_ELT_BITS);
+ int is_needed = 0;
+
+ live[offset] |= bit;
+ /* A hard reg in a wide mode may really be multiple registers.
+ If so, mark all of them just like the first. */
+ if (regno < FIRST_PSEUDO_REGISTER)
+ {
+ int n;
+
+ /* For stack ptr or arg pointer,
+ nothing below can be necessary, so waste no more time. */
+ if (regno == STACK_POINTER_REGNUM
+ || regno == ARG_POINTER_REGNUM)
+ return;
+ /* No death notes for global register variables;
+ their values are live after this function exits. */
+ if (global_regs[regno])
+ return;
+
+ n = HARD_REGNO_NREGS (regno, GET_MODE (x));
+ while (--n > 0)
+ {
+ live[(regno + n) / REGSET_ELT_BITS]
+ |= 1 << ((regno + n) % REGSET_ELT_BITS);
+ is_needed |= (needed[(regno + n) / REGSET_ELT_BITS]
+ & 1 << ((regno + n) % REGSET_ELT_BITS));
+ }
+ }
+ if (final)
+ {
+ if (regno < FIRST_PSEUDO_REGISTER)
+ {
+ /* If a hard reg is being used,
+ record that this function does use it. */
+
+ register int i;
+ i = HARD_REGNO_NREGS (regno, GET_MODE (x));
+ if (i == 0)
+ i = 1;
+ do
+ regs_ever_live[regno + --i] = 1;
+ while (i > 0);
+ }
+ else
+ {
+ /* Keep track of which basic block each reg appears in. */
+
+ register int blocknum = BLOCK_NUM (insn);
+
+ if (reg_basic_block[regno] == REG_BLOCK_UNKNOWN)
+ reg_basic_block[regno] = blocknum;
+ else if (reg_basic_block[regno] != blocknum)
+ reg_basic_block[regno] = REG_BLOCK_GLOBAL;
+
+ /* Record the earliest insn that uses this reg,
+ provided the reg is used only in one basic block.
+ Do this by recording each insn, and the one that
+ sticks is the last one scanned (the earliest insn). */
+
+ reg_first_use[regno] = insn;
+
+ /* Record where each reg is used, so when the reg
+ is set we know the next insn that uses it. */
+
+ reg_next_use[regno] = insn;
+
+ /* Count (weighted) number of uses of each reg. */
+
+ reg_n_refs[regno] += loop_depth;
+ }
+
+ /* Record and count the insns in which a reg dies.
+ If it is used in this insn and was dead below the insn
+ then it dies in this insn. */
+
+ if (!(needed[offset] & bit) && !is_needed
+ && ! find_regno_note (insn, REG_DEAD, regno))
+ {
+ REG_NOTES (insn)
+ = gen_rtx (EXPR_LIST, REG_DEAD, x, REG_NOTES (insn));
+ reg_n_deaths[regno]++;
+ }
+ }
+ }
+ return;
+
+ case SET:
+ {
+ register rtx testreg = SET_DEST (x);
+ int mark_dest = 0;
+
+ /* Storing in STRICT_LOW_PART is like storing in a reg
+ in that this SET might be dead, so ignore it in TESTREG.
+ but in some other ways it is like using the reg. */
+ /* Storing in a SUBREG or a bit field is like storing the entire
+ register in that if the register's value is not used
+ then this SET is not needed. */
+ while (GET_CODE (testreg) == STRICT_LOW_PART
+ || GET_CODE (testreg) == ZERO_EXTRACT
+ || GET_CODE (testreg) == SIGN_EXTRACT
+ || GET_CODE (testreg) == SUBREG)
+ {
+ /* Modifying a single register in an alternate mode
+ does not use any of the old value. But these other
+ ways of storing in a register do use the old value. */
+ if (GET_CODE (testreg) == SUBREG
+ && !(REG_SIZE (SUBREG_REG (testreg)) > REG_SIZE (testreg)))
+ ;
+ else
+ mark_dest = 1;
+
+ testreg = XEXP (testreg, 0);
+ }
+
+ /* If this is a store into a register,
+ recursively scan the only value being stored,
+ and only if the register's value is live after this insn.
+ If the value being computed here would never be used
+ then the values it uses don't need to be computed either. */
+
+ if (GET_CODE (testreg) == REG
+ && (regno = REGNO (testreg), regno != FRAME_POINTER_REGNUM)
+ && regno != ARG_POINTER_REGNUM
+ && ! (regno < FIRST_PSEUDO_REGISTER && global_regs[regno]))
+#if 0 /* This was added in 1.25, but screws up death notes for hard regs.
+ It probably isn't really needed anyway. */
+ && (regno >= FIRST_PSEUDO_REGISTER
+ || INSN_VOLATILE (insn)))
+#endif
+ {
+ register int offset = regno / REGSET_ELT_BITS;
+ register int bit = 1 << (regno % REGSET_ELT_BITS);
+ if ((needed[offset] & bit)
+ /* If insn refers to volatile, we mustn't delete it,
+ so its inputs are all needed. */
+ || INSN_VOLATILE (insn))
+ {
+ mark_used_regs (needed, live, SET_SRC (x), final, insn);
+ if (mark_dest)
+ mark_used_regs (needed, live, SET_DEST (x), final, insn);
+ }
+ return;
+ }
+ }
+ break;
+ }
+
+ /* Recursively scan the operands of this expression. */
+
+ {
+ register char *fmt = GET_RTX_FORMAT (code);
+ register int i;
+
+ for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
+ {
+ if (fmt[i] == 'e')
+ {
+ /* Tail recursive case: save a function call level. */
+ if (i == 0)
+ {
+ x = XEXP (x, 0);
+ goto retry;
+ }
+ mark_used_regs (needed, live, XEXP (x, i), final, insn);
+ }
+ else if (fmt[i] == 'E')
+ {
+ register int j;
+ for (j = 0; j < XVECLEN (x, i); j++)
+ mark_used_regs (needed, live, XVECEXP (x, i, j), final, insn);
+ }
+ }
+ }
+}
+\f
+#ifdef AUTO_INC_DEC
+
+static int
+try_pre_increment_1 (insn)
+ rtx insn;
+{
+ /* Find the next use of this reg. If in same basic block,
+ make it do pre-increment or pre-decrement if appropriate. */
+ rtx x = PATTERN (insn);
+ int amount = ((GET_CODE (SET_SRC (x)) == PLUS ? 1 : -1)
+ * INTVAL (XEXP (SET_SRC (x), 1)));
+ int regno = REGNO (SET_DEST (x));
+ rtx y = reg_next_use[regno];
+ if (y != 0
+ && BLOCK_NUM (y) == BLOCK_NUM (insn)
+ && try_pre_increment (y, SET_DEST (PATTERN (insn)),
+ amount))
+ {
+ /* We have found a suitable auto-increment
+ and already changed insn Y to do it.
+ So flush this increment-instruction. */
+ PUT_CODE (insn, NOTE);
+ NOTE_LINE_NUMBER (insn) = NOTE_INSN_DELETED;
+ NOTE_SOURCE_FILE (insn) = 0;
+ /* Count a reference to this reg for the increment
+ insn we are deleting. When a reg is incremented.
+ spilling it is worse, so we want to make that
+ less likely. */
+ reg_n_refs[regno] += loop_depth;
+ reg_n_sets[regno]++;
+ return 1;
+ }
+ return 0;
+}
+
+/* Try to change INSN so that it does pre-increment or pre-decrement
+ addressing on register REG in order to add AMOUNT to REG.
+ AMOUNT is negative for pre-decrement.
+ Returns 1 if the change could be made.
+ This checks all about the validity of the result of modifying INSN. */
+
+static int
+try_pre_increment (insn, reg, amount)
+ rtx insn, reg;
+ int amount;
+{
+ register rtx use;
+
+ /* Nonzero if we can try to make a pre-increment or pre-decrement.
+ For example, addl $4,r1; movl (r1),... can become movl +(r1),... */
+ int pre_ok = 0;
+ /* Nonzero if we can try to make a post-increment or post-decrement.
+ For example, addl $4,r1; movl -4(r1),... can become movl (r1)+,...
+ It is possible for both PRE_OK and POST_OK to be nonzero if the machine
+ supports both pre-inc and post-inc, or both pre-dec and post-dec. */
+ int post_ok = 0;
+
+ /* Nonzero if the opportunity actually requires post-inc or post-dec. */
+ int do_post = 0;
+
+ /* From the sign of increment, see which possibilities are conceivable
+ on this target machine. */
+#ifdef HAVE_PRE_INCREMENT
+ if (amount > 0)
+ pre_ok = 1;
+#endif
+#ifdef HAVE_POST_INCREMENT
+ if (amount > 0)
+ post_ok = 1;
+#endif
+
+#ifdef HAVE_PRE_DECREMENT
+ if (amount < 0)
+ pre_ok = 1;
+#endif
+#ifdef HAVE_POST_DECREMENT
+ if (amount < 0)
+ post_ok = 1;
+#endif
+
+ if (! (pre_ok || post_ok))
+ return 0;
+
+ /* It is not safe to add a side effect to a jump insn
+ because if the incremented register is spilled and must be reloaded
+ there would be no way to store the incremented value back in memory. */
+
+ if (GET_CODE (insn) == JUMP_INSN)
+ return 0;
+
+ use = 0;
+ if (pre_ok)
+ use = find_use_as_address (PATTERN (insn), reg, 0);
+ if (post_ok && (use == 0 || use == (rtx) 1))
+ {
+ use = find_use_as_address (PATTERN (insn), reg, -amount);
+ do_post = 1;
+ }
+
+ if (use == 0 || use == (rtx) 1)
+ return 0;
+
+ if (GET_MODE_SIZE (GET_MODE (use)) != (amount > 0 ? amount : - amount))
+ return 0;
+
+ XEXP (use, 0) = gen_rtx (amount > 0
+ ? (do_post ? POST_INC : PRE_INC)
+ : (do_post ? POST_DEC : PRE_DEC),
+ Pmode, reg);
+
+ /* Record that this insn now has an implicit side effect on X. */
+ REG_NOTES (insn) = gen_rtx (EXPR_LIST, REG_INC, reg, REG_NOTES (insn));
+ return 1;
+}
+
+#endif /* AUTO_INC_DEC */
+\f
+/* Find the place in the rtx X where REG is used as a memory address.
+ Return the MEM rtx that so uses it.
+ If PLUSCONST is nonzero, search instead for a memory address equivalent to
+ (plus REG (const_int PLUSCONST)).
+
+ If such an address does not appear, return 0.
+ If REG appears more than once, or is used other than in such an address,
+ return (rtx)1. */
+
+static rtx
+find_use_as_address (x, reg, plusconst)
+ register rtx x;
+ rtx reg;
+ int plusconst;
+{
+ enum rtx_code code = GET_CODE (x);
+ char *fmt = GET_RTX_FORMAT (code);
+ register int i;
+ register rtx value = 0;
+ register rtx tem;
+
+ if (code == MEM && XEXP (x, 0) == reg && plusconst == 0)
+ return x;
+
+ if (code == MEM && GET_CODE (XEXP (x, 0)) == PLUS
+ && XEXP (XEXP (x, 0), 0) == reg
+ && GET_CODE (XEXP (XEXP (x, 0), 1)) == CONST_INT
+ && INTVAL (XEXP (XEXP (x, 0), 1)) == plusconst)
+ return x;
+
+ if (code == SIGN_EXTRACT || code == ZERO_EXTRACT)
+ {
+ /* If REG occurs inside a MEM used in a bit-field reference,
+ that is unacceptable. */
+ if (find_use_as_address (XEXP (x, 0), reg, 0) != 0)
+ return (rtx) 1;
+ }
+
+ if (x == reg)
+ return (rtx) 1;
+
+ for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
+ {
+ if (fmt[i] == 'e')
+ {
+ tem = find_use_as_address (XEXP (x, i), reg, plusconst);
+ if (value == 0)
+ value = tem;
+ else if (tem != 0)
+ return (rtx) 1;
+ }
+ if (fmt[i] == 'E')
+ {
+ register int j;
+ for (j = XVECLEN (x, i) - 1; j >= 0; j--)
+ {
+ tem = find_use_as_address (XVECEXP (x, i, j), reg, plusconst);
+ if (value == 0)
+ value = tem;
+ else if (tem != 0)
+ return (rtx) 1;
+ }
+ }
+ }
+
+ return value;
+}
+\f
+/* Write information about registers and basic blocks into FILE.
+ This is part of making a debugging dump. */
+
+void
+dump_flow_info (file)
+ FILE *file;
+{
+ register int i;
+ static char *reg_class_names[] = REG_CLASS_NAMES;
+
+ fprintf (file, "%d registers.\n", max_regno);
+
+ for (i = FIRST_PSEUDO_REGISTER; i < max_regno; i++)
+ if (reg_n_refs[i])
+ {
+ enum reg_class class;
+ fprintf (file, "\nRegister %d used %d times across %d insns",
+ i, reg_n_refs[i], reg_live_length[i]);
+ if (reg_basic_block[i] >= 0)
+ fprintf (file, " in block %d", reg_basic_block[i]);
+ if (reg_n_deaths[i] != 1)
+ fprintf (file, "; dies in %d places", reg_n_deaths[i]);
+ if (reg_n_calls_crossed[i] == 1)
+ fprintf (file, "; crosses 1 call", reg_n_calls_crossed[i]);
+ else if (reg_n_calls_crossed[i])
+ fprintf (file, "; crosses %d calls", reg_n_calls_crossed[i]);
+ if (PSEUDO_REGNO_BYTES (i) != UNITS_PER_WORD)
+ fprintf (file, "; %d bytes", PSEUDO_REGNO_BYTES (i));
+ class = reg_preferred_class (i);
+ if (class != GENERAL_REGS)
+ {
+ if (reg_preferred_or_nothing (i))
+ fprintf (file, "; %s or none", reg_class_names[(int) class]);
+ else
+ fprintf (file, "; pref %s", reg_class_names[(int) class]);
+ }
+ if (REGNO_POINTER_FLAG (i))
+ fprintf (file, "; pointer");
+ fprintf (file, ".\n");
+ }
+ fprintf (file, "\n%d basic blocks.\n", n_basic_blocks);
+ for (i = 0; i < n_basic_blocks; i++)
+ {
+ register rtx head, jump;
+ register int regno;
+ fprintf (file, "\nBasic block %d: first insn %d, last %d.\n",
+ i,
+ INSN_UID (basic_block_head[i]),
+ INSN_UID (basic_block_end[i]));
+ /* The control flow graph's storage is freed
+ now when flow_analysis returns.
+ Don't try to print it if it is gone. */
+ if (basic_block_drops_in)
+ {
+ fprintf (file, "Reached from blocks: ");
+ head = basic_block_head[i];
+ if (GET_CODE (head) == CODE_LABEL)
+ for (jump = LABEL_REFS (head);
+ jump != head;
+ jump = LABEL_NEXTREF (jump))
+ {
+ register int from_block = BLOCK_NUM (CONTAINING_INSN (jump));
+ fprintf (file, " %d", from_block);
+ }
+ if (basic_block_drops_in[i])
+ fprintf (file, " previous");
+ }
+ fprintf (file, "\nRegisters live at start:");
+ for (regno = 0; regno < max_regno; regno++)
+ {
+ register int offset = regno / REGSET_ELT_BITS;
+ register int bit = 1 << (regno % REGSET_ELT_BITS);
+ if (basic_block_live_at_start[i][offset] & bit)
+ fprintf (file, " %d", regno);
+ }
+ fprintf (file, "\n");
+ }
+ fprintf (file, "\n");
+}